Category: esters-buliding-blocks

7270-63-5, name is 5-Diazo-2,2-dimethyl-1,3-dioxane-4,6-dione, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. HPLC of Formula: C6H6N2O4

General procedure: To a solution of diazo compound 1 (0.5 mmol) and alkynes (1.1 mmol) in toluene (2 mL) was added rhodium(II) pivalate (0.01 mmol). The reaction mixture was stirred at 60C for 0.5-5 h. The solvent was evaporated in rotary evaporator under reduced pressure to give the residue. The residue was purified by flash column chromatography on silica gel to give the product. 4.2.13. 2,4-Bis(4-(trifluoromethyl)phenyl)-6H-furo[2,3-b]pyran-6-one (5l). Reaction of 1 (85 mg, 0.5 mmol) and 4-ethynyl-alpha,alpha,alpha-trifluorotoluene (187 mg, 1.1 mmol) under Rh2(OPiv)4 (6 mg, 0.01 mmol) afforded 5l (106 mg, 50%) as a solid: mp 158-160 C; 1H NMR (300 MHz, CDCl3) delta 7.82 (2H, d, J=8.1 Hz), 7.76-7.73 (4H, m), 7.65 (2H, d, J=8.1 Hz), 6.94 (1H, s), 6.26 (1H, s); 13C NMR (75 MHz, CDCl3) delta 158.6, 152.1, 147.3, 138.4, 131.9, 128.2, 127.9, 126.4, 126.3, 126.3, 126.1, 126.0, 125.1, 123.7, 106.4, 102.4, 99.5; IR (KBr) 3125, 1728, 1616, 1528, 1325, 1127, 837, 672 cm-1; HRMS m/z (M+) calcd for C21H10F6O3: 424.0534. Found: 424.0532.

The synthetic route of 7270-63-5 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Somai Magar, Krishna Bahadur; Lee, Yong Rok; Kim, Sung Hong; Tetrahedron; vol. 69; 44; (2013); p. 9294 – 9302;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

A common compound: 1731-86-8, name is Methyl undecanoate, belongs to esters-buliding-blocks compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below. 1731-86-8

General procedure: The synthesis of the AKGs was performed following the literature with some modifications (Baumann and Mangold 1964; Hanus et al. 2001; Appendino et al. 2003; Parkkari et al. 2006). LiAlH4 (550 mg, 14.5 mmol) was added slowly to a solution of the corresponding methyl ester (3.4 mmol) in anhydrous tetrahydrofuran (15 mL) at 0C and stirred for 1 h and was then left at 20C for 20 h. The reaction mixture was washed with NaOH (10%) followed by HCl (10%) and extracted with diethyl ether (3 × 20 mL); the extract was neutralized with saturated NaHCO3, dried under reduced pressure and purified by CC. The alcohol obtained was subsequently mesylated in absolute pyridine (4.5 mL, 55.6 mmol) at 0C by the addition of MsCl (880 mg, 7.65 mmol) and the solution was maintained for 24 h at 20C. After quenching the reaction with 5 mL of degasified water, the solution was extracted with diethyl ether (4 × 20 mL). The organic phase was washed with H2SO4 (2 N), neutralized, concentrated in vacuo, and the crude mesylate was purified by CC. KOH (127 mg, 2.26 mmol) was added to the chiral precursor (R)-solketal (283 mg, 2.14 mmol) in anhydrous toluene (2 mL). The reaction stirred at 50C for 1 h before the addition of metallic Na (3 mg, 0.15 mmol) followed by the mesylate dissolved in toluene (15 mL), and the resulting mixture was kept at 50C for 72 h. The reaction was quenched with HCl (10%) and extracted with ethyl ether (4 × 20 mL). The organic phase was neutralized, concentrated and purified by CC to give 1-O-alkyl-2,3-O-isopropylidene-sn-glycerol. This intermediate was deprotected in 5 mL of HCl:MeOH (1:10 v/v) and refluxed overnight. After the addition of H2O (10 mL) and extraction with diethyl ether (4 × 20 mL), the organic phase was neutralized, evaporatedto dryness in vacuo, and the residue was purified by CC to afford pure AKGs. Each step in the synthesis was monitored by TLC, and all CC steps were eluted with hexane-toluene-ethyl acetate (10:0:0-0:10:0-0:0:10) mixtures. The structures of the synthesised compounds were confirmed by 1H, 13C APT NMR with COSY, HMQC, HMBC and ESI-MS or HRESI-MS spectra along with the specific optical rotation.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1731-86-8, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Fernandez Montoya, Deicy J.; Contreras Jordan, Luis A.; Moreno-Murillo, Barbara; Silva-Gomez, Edelberto; Mayorga-Wandurraga, Humberto; Natural Product Research; (2019);,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 75567-84-9, name is Methyl 3-(4-bromophenyl)propanoate, A new synthetic method of this compound is introduced below., SDS of cas: 75567-84-9

General procedure: Methyl 3-(4-bromophenyl)propanoate31 1 (1.0 equiv) and the appropriate commercially available (substituted-phenyl)boronic acid (1.5 equiv) were dissolved in a mixture of dioxane/EtOH (1:1) (concentration 1 mL/mmol) and 1 M aqueous NaHCO3 (2.0 equiv). To the solution, Pd(PPh3)4 (2.5 mol %) was added and the mixture was heated in the microwave at 100 C for 3 h, after which TLC showed full conversion. The reaction mixture was concentrated in vacuo, acidified to pH = 1 using 1 M HCl (aq), extracted with EtOAc, dried over MgSO4 and concentrated under reduced pressure. Purification by column chromatography eluting with CH2Cl2/Pet. ether (2:1) yielded the desired biphenyl esters as solids.

The synthetic route of 75567-84-9 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Van Veldhoven, Jacobus P.D.; Liu, Rongfang; Thee, Stephanie A.; Wouters, Yessica; Verhoork, Sanne J.M.; Mooiman, Christiaan; Louvel, Julien; Ijzerman, Adriaan P.; Bioorganic and Medicinal Chemistry; vol. 23; 14; (2015); p. 4013 – 4025;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

34846-90-7, name is Methyl 3-methoxyacrylate, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. COA of Formula: C5H8O3

To a solution of 1,1,2,2-tetrafluoroethyldimethylamine (96percent, 46 g, 305 mmol) in acetonitrile (100 ml) was added dropwise, at 25° C. under Argon, BF3-etherate (38.9 g, 274 mmol). Subsequently, under reflux conditions (approx. 70° C.), a solution of methyl 3-methoxyacrylate (95percent, 33.5 g, 274 mmol) in acetonitrile (75 ml) was added dropwise to the reaction mixture within 1 h. After stirring under reflux conditions for 21 h, the reaction mixture was cooled to 25° C. The resulting reaction mixture was added dropwise to a solution of methylhydrazine (21 g, 457 mmol) in acetonitrile (48 ml) at 0 to 15° C. within 1.5 h. After stirring at 25° C. for 0.5 h, water (100 ml) was added. The reaction mixture was extracted once with 150 ml and once with 90 ml of methylene chloride. The combined organic phases were washed with water (1.x.200 ml). The resulting organic phase (530 g) contained, according to GC area percent analysis, methyl 3-difluoromethyl-1-methylpyrazole-4-carboxylate and methyl 5-difluoromethyl-1-methylpyrazole-4-carboxylate in a ratio of 6.8:1. According to quantitative HPLC analysis, the organic phase comprised 6.7percent by weight of methyl 3-difluoromethyl-1-methylpyrazole-4-carboxylate. This corresponds to a yield of 68percent (based on methyl 3-methoxyacrylate).

The synthetic route of 34846-90-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BASF SE; US2010/184994; (2010); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Electric Literature of 55666-42-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 55666-42-7, name is tert-Butyl 2-bromobenzoate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Preparation 2. 4′-Bromomethyl-3′-fluorobiphenyl-2-carboxylic Acid t-Butyl Ester To a solution of 1.0M DCC in DCM (800 mL, 800 mol) cooled at 0 C. was added 2-bromobenzoic acid (2a) (161 g, 800 mmol) followed by DMAP (9.0 g, 740 mmol) and t-butyl alcohol (82.4 mL, 880 mmol). The mixture was stirred at room temperature for 10 minutes, then warmed to room temperature and stirred. After 16 hours, the mixture was then filtered. The organic was washed with saturated NaHCO3 (400 mL), saturated aqueous NaCl, dried over MgSO4, filtered and concentrated under reduced pressure to produce the crude intermediate (2b) as an oil (228.8 g).The crude intermediate (2b) (109.6 g, 426 mmol) and 3-fluoro-4-methylphenyl-boronic acid (72.2 g, 449 mmol) were suspended in isopropyl alcohol (360 mL, 4.7 mmol). A 2.0M solution of sodium carbonate in water (360 mL, 720 mmol) was added and the mixture was degassed under nitrogen. Tetrakis(triphenylphosphine)palladium(0) (4.9 g, 4.3 mmol) was then added and the mixture was stirred at 90 C. for 46 hours. The mixture was cooled to room temperature, diluted with EtOAc (800 mL), and the layers were separated. The organic was washed with saturated aqueous NaCl and concentrated under reduced pressure. The recovered oil was purified by silica gel chromatography (3×4-6% EtOAc:hexanes) to yield intermediate (2c) as a clear oil (93.3 g).Intermediate (2c) (89.8 g, 314 mmol, 1.0 eq) was dissolved in CCl4 (620 mL, 6.4 mol) and was degassed under nitrogen. NBS (55.8 g, 314 mmol) was added, followed by benzoyl peroxide (1.5 g, 6.3 mmol) and the mixture was heated at 90 C. under nitrogen for 7 hours. The reaction was cooled in an ice bath, filtered, and concentrated under reduced pressure. The recovered oil was triturated with 150 mL of 3% EtOAc: hexanes. The solution was chilled at -20 C. for 2 hours, then filtered and washed with cold 3% EtOAc:hexanes solution (200 mL) to yield the title compound as an off white solid (88.9 g). 1H-NMR (CDCl3) delta (ppm): 1.3 (m, 9H), 4.6 (s, 2H), 7.0-7.1 (m, 2H), 7.3 (dd, 1H), 7.4 (m, 1H), 7.5 (m, 1H), 7.8 (dd, 1H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, tert-Butyl 2-bromobenzoate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Chao, Robert S.; Zhang, Weijiang; US2010/81697; (2010); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Application of 59247-47-1, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 59247-47-1 as follows.

To a 250 mL round-bottom flask ‘.vas added (lS,4R,5R)-5-[[5-cyclopropyl-3-(2-cyclopropyl-6-fluoropheny)-1,2-oxazol-4-y l]methoxy ]-2-azabicyclo[2.2.1]heptan-3-one10 3lle (300 mg, 0.78 mmol, 1.00 equiv.), Pd1(dba)3 (36 mg, 0.04 mmoL 0.05 equiv.),XantPhos (46 mg, 0.08 mmol, 0.10 equiv.), Cs£03 (384 mg, 1.18 mmol, 1.50 equiv.), tol (5mL), and tert-hutyl 4-bromobenzoate (301 mg, 1.17 mmol, 1.50 equiv.). The resultingmixture vvas heated at ll0°C ovemight ·with stirring. After cooling to room temperature, themixture vvas diluted with 50 mL ofH20, extracted with ethyl acetate (100 mL x 2), and the15 combined organic extracts were washed with brine (100 mL x 2), dried, and concentrated.The residue was purified by silica gel column chromatography eluting with ethylacetate/hexane (2: l) to give tert-butyl 4-[(l S,4R,SR)-5-[[ 5-cyclopropyl-3-(2-cyclopropyl-6-fluorophenyl)-1,2-oxazol-4-yl]methoxy ]-3-oxo-2-azabicyclo[2.2.1 ]heptan-2-yl]benzoate 311 f(300 mg, 68percent) as a yellow oil.

According to the analysis of related databases, 59247-47-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ARDELYX, INC.; CHAO, Jianhua; JAIN, Rakesh; HU, Lily; LEWIS, Jason Gustaf; BARIBAULT, Helene; CALDWELL, Jeremy; (582 pag.)WO2018/39386; (2018); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 55666-43-8 as follows. COA of Formula: C7H13BrO2

Example 6; 7V-Benzyl-3-(4-{[(2R)-2-hydroxy-2-(8-hydroxy-2-oxo-l,2-dihydroquinolin-5- yl)ethyl]amino}piperidin-l-yl)propanamide; i) tert-Butyl 3-(4-oxopiperidin-l-yl)propanoate o To a solution of piperidin-4-one (1 g) in CHCl3 (30 mL) was added fert-butyl 3- bromopropanoate (1.2 mL) followed by triethylamine (1.8 mL). The reaction mixture was heated at reflux for 18 h. The mixture was allowed to cool to room temperature then diluted with EtOAc and H2O and the layers separated. The aqueous material was extracted with further EtOAc (x2) then the combined organic extracts washed with water followed 5 by saturated aqueous NaCl, collected and dried (MgSO4). The volatiles were removed in vacuo to afford the sub-title compound as an orange oil. Yield: 0.92 g 1H NMR (CDCl3) delta 2.81 – 2.75 (m, 6H), 2.47 – 2.42 (m, 6H), 1.46 (s, 9H).

According to the analysis of related databases, 55666-43-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ASTRAZENECA AB; WO2007/102771; (2007); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 90030-48-1, name is Sodium 3-methoxy-3-oxopropane-1-sulfinate, A new synthetic method of this compound is introduced below., 90030-48-1

Cu(I)I (570 mg, 3.02 mmol) was added to a solution of 4-((8-(6-bromo-4- methylbenzo[d]thiazol-2-yl)-8-azabicyclo[3.2.l]octan-3-yloxy)methyl)-5-cyclopropyl-3-(2- (trifluoromethoxy)phenyl)isoxazole_(960 mg, 1.51 mmol), sodium 3-methoxy-3-oxopropane- 1-sulfinate (790 mg, 4.54 mmol ) and L-proline (174 mg, 1.51 mmol) in dimethylsulfoxide (20 ml) at room temperature and the resulting mixture warmed to 130 C. After 16 h, water and ethyl acetate were added and the mixture filtered through celite. The filtrate was then washed with cold water, brine, dried over anhydrous Na2S04, filtered, concentrated under reduced pressure and purified by flash column chromatography using silica gel 100-200 mesh, eluting with 0-65% ethyl acetate in petroleum ether to afford the titled compound (0.25 g, 25 %) as a solid. LC-MS: 2.57 mins, [M+H]+ 706

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; INORBIT THERAPEUTICS AB; SHARMA, Rajiv; BENTHEM, Lambertus; JUDKINS, Robert; (69 pag.)WO2020/33382; (2020); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 35179-98-7, name is Chloromethyl ethyl carbonate, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C4H7ClO3

EXAMPLE 2 Preparation of 4-fluoro-2-[[(4-methoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole-1-ylmethyl ethyl carbonate To NaOH (0.26 g, 6.5 mmol) dissolved in H2 O (12 ml) 4-fluoro-2-[[(4-methoxy-2-pyridinyl) methyl]sulfinyl]-1H-benzimidazole (1.0 g, 3.3 mmol) and tetrabutylammoniumhydrogen sulfate (1.1 g, 3.2 mmol) were added under stirring. The mixture was stirred for about 5 min, at ambient temperature and then extracted 3 times with CH2 Cl2 (20 ml). After separation the combined CH2 Cl2 phases were dried over Na2 SO4, filtrated and the solvent evaporated off giving an oil. The residual oil was dissolved in toluene (30 ml). Chloromethyl ethyl carbonate (0.68 g, crude material) dissolved in dry toluene (3 ml) was added under a protective gas and under stirring. The mixture was stirred at ambient temperature over night. The toluene was evaporated off and the residual oil was chromatographed on a silica column using ethyl acetate as eluent. Crystallizing from ethyl acetate – diethyl ether gave the title compound (0.33 g, 25%). NMR data for the product is given below.

According to the analysis of related databases, 35179-98-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Aktiebolaget Hassle; US5049674; (1991); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Some common heterocyclic compound, 6933-47-7, name is Methyl 4-amino-2-methylbenzoate, molecular formula is C9H11NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. SDS of cas: 6933-47-7

General procedure: A solution of (7: R1=cyclopentyloxy) (100mg, 363mumol) in dichloromethane (5 mL), cooled to 0C, was treated with oxalyl chloride (63.6 muL, 727 mumol), followed by a drop of N,N-dimethylformamide. The resultant mixture was stirred for 1h at room temperature. The solvent was evaporated in vacuo and the residue dissolved in dichloromethane (5 mL) and then treated with a solution of methyl 4-aminobenzoate (8: R2=H, R=Me) (54.9mg, 363mumol) and di-isopropylethylamine (190muL, 1.09mmol) in dichloromethane (5mL). The reaction mixture was stirred for 12 h at room temperature and then partitioned between dichloromethane (20 mL) and aqueous 1M hydrochloric acid (20 mL). The phases were separated, and the organic phase was washed successively with water (2×20 mL), and brine (20 mL), dried over magnesium sulfate, filtered and then the solvent was removed in vacuo. The residue was purified by silica gel chromatography (12 g, 0-100 % ethyl acetate/isohexane) to afford methyl 4-[3,5-dichloro-4-(cyclopentyloxy)benzamido]benzoate (10: R1 = cyclopentyloxy, R2 = H, R =Me) (30mg, 20% yield). 1H NMR (400MHz, CDCl3) delta 8.06 (2H, d, J=8.8Hz,), 7.85 (1H, br s), 7.82 (2H, s), 7.71 (2H, d, J=8.8Hz), 5.07-5.03 (1H, m), 3.92 (3H, s), 2.10-1.90 (4H, m), 1.85-1.70 (2H, m), 1.70-1.60 (2H, m).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 6933-47-7, its application will become more common.

Reference:
Article; Clarke, Earl; Jarvis, Christopher I.; Goncalves, Maria B.; Kalindjian, S. Barret; Adams, David R.; Brown, Jane T.; Shiers, Jason J.; Taddei, David M.A.; Ravier, Elodie; Barlow, Stephanie; Miller, Iain; Smith, Vanessa; Borthwick, Alan D.; Corcoran, Jonathan P.T.; Bioorganic and Medicinal Chemistry; vol. 26; 4; (2018); p. 798 – 814;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics