Category: esters-buliding-blocks

Adding a certain compound to certain chemical reactions, such as: 22223-49-0, name is Methyl 2-amino-3-methylbenzoate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 22223-49-0, SDS of cas: 22223-49-0

Step B Preparation of methyl 2-[[(2,2-dimethylhydrazino)carbonyl]amino]-3-methylbenzoate To a solution of the title compound of Step A (25.4 g, 154 mmol) in p-dioxane (500 mL) under a nitrogen atmosphere was added diphosgene (22.3 mL, 184 mmol), followed by triethylamine (25.6 mL, 184 mmol). A white precipitate formed, and the resulting mixture was heated to 60 C. overnight. The mixture was cooled to room temperature and filtered. The precipitate was washed with diethyl ether and the combined filtrates were concentrated under reduced pressure to afford an oil (30.97 g) which, without further characterization, was dissolved in toluene (400 mL). To this solution at 0 C. under a nitrogen atmosphere was added 1,1-dimethylhydrazine (12.3 mL, 162 mmol) and the resulting milky suspension was stirred at 0 C. for 30 min. The precipitate was collected by filtration and washed with hexanes to afford the title compound of Step B (25.57 g) as a beige solid. 1 H NMR (CDCl3): delta 9.22 (br s,1H), 7.75 (d,1H), 7.40 (d,1H), 7.14 (t,1H), 5.32 (br s,1H), 3.88 (s,3H), 2.66 (s,6H), 2.35 (s,3H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; E. I. du Pont de Nemours and Company; US5962436; (1999); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 2318-25-4 as follows. Recommanded Product: 2318-25-4

Preparation Example A-12. 2-(2-Cyanoethyl)-3,3-diaminopropenoic acid ethyl ester (1-Ethoxyformimidoyl) 1-acetic acid ethyl ester hydrochloride (50g, 0.26mol) was suspended in an ammonia-ethanol solution (300mL; prepared by saturating ethanol with ammonia gas at room temperature), which was then stirred at room temperature for 4 hours. After the reaction was completed, the precipitated salt was removed by filtration, and the filtrate was concentrated in vacuo at room temperature to reach 1/3 of the amount. Hydrochloric acid-methanol (130mL; hydrochloric acid content:7.5percent) was added to this filtrate, the solution was then concentrated under a reduced pressure to obtain 3,3-diamino-acrylic acid ethyl ester hydrochloride (40g, 0.24mol, 92percent) as a solid. The resulting 3,3-diamino-acrylic acid ethyl ester hydrochloride (2.2g, 13.2mmol) was suspended in tetrahydrofuran (40mL), triethylamine (2mL, 14.3mmol) and acrylonitrile (1.2mL, 19.3mmol) were added thereto, and the solution was refluxed for 6 hours. After the reaction was completed, the resulting triethylamine hydrochloride was filtered, and the filtrate was concentrated to obtain the title compound (0.6g, 3.3mmol, 25percent). 1H-NMR Spectrum (CDCl3) delta (ppm) :1.26 (3H, t, J=7.2Hz), 2.42-2.49 (2H, m), 2.50-2.57 (2H, m), 4.12 (2H, q, J=7.2Hz), 4.22 (2H, brs), 6.45 (2H, brs).

According to the analysis of related databases, 2318-25-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Eisai R&D Management Co., Ltd.; EP1782811; (2007); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 23676-08-6, name is Methyl 4-ethoxybenzoate, This compound has unique chemical properties. The synthetic route is as follows., Product Details of 23676-08-6

To a stirred suspension of CuCN (1.8 g, 20.0 mmol) in 50 mL of dry THF at -78 C under argon, a solution of 1-propenylmagnesium bromide (133.2 mmol, 265 mL of 0.5 M solution in THF) was added dropwise. The slurry was stirred for an additional 30 min and then a solution of methyl 4-ethoxybenzoate (6.0 g, 33.3 mmol) in 60 mL of dry THF was added slowly. The stirred reaction mixture was allowed to warm to room temperature overnight. The reaction wasquenched with ice cold saturated aqueous NaH2PO4 (100 mL) and the mixture was extracted with ether (4 × 100 mL). The combined ether extracts were washed with brine (2 × 100 mL), dried (MgSO4), filtered, and evaporated to dryness. The crude homoallylic ketone was purified by silica gel flash chromatography using a gradient of ethyl acetate in hexane as the eluent to give 8 (7.4 g, 95%) as a colorless oil.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 23676-08-6.

Reference:
Article; Mandal, Pijus K.; Freiter, Eric M.; Bagsby, Allison L.; Robertson, Fredika M.; McMurray, John S.; Bioorganic and Medicinal Chemistry Letters; vol. 21; 20; (2011); p. 6071 – 6073;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 61500-87-6 as follows. COA of Formula: C9H8F3NO2

General procedure: To a solution of methyl 2-amino-4-fluorobenzoate (1.64 g, 9.71 mmol) and methanesulfonyl chloride (5.28 mL, 115 mmol) in dichloromethane (100 mL) was added pyridine (7.86 mL, 97.1 mmol). The solution was stirred at room temperature for 18 hours. The reaction was quenched with 1N HCl and was stirred for 5 minutes. The mixture was extracted with DCM (3×). The combined organic layers were washed with brine, dried over anhydrous MgSO4, filtered and concentrated. The crude product was purified by silica gel chromatography to afford methyl 4-fluoro-2-(methylsulfonamido)benzoate.

According to the analysis of related databases, 61500-87-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Gilead Sciences, Inc.; Farand, Julie; Kaplan, Joshua A.; Notte, Gregory; Olen, Casey Lockwood; Sangi, Michael; Sperandio, David; (115 pag.)US2019/359565; (2019); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 4897-84-1, name is Methyl 4-bromobutanoate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4897-84-1, SDS of cas: 4897-84-1

To a solution of 3-bromophenol (3.44 g, 20.0 mmol) and methyl 4-bromobutanoate (4.32 g, 24.0 mmol) in DMF (20 mL) was added K2co3 (5.52 g, 40.0 mmol). The mixture was stirred at rt for 0.5 h and then heated with stirring at 90 oC for 1 h. After diluting with EtOAc (200 mL), the mixture was washed with water (3 x 50 mL), dried and concentrated. The crude product was purified by silica gel column chromatograph (petroleum/EtOAc = 10:1) to give methyl 4-(3- bromophenoxy)butanoate as a white liquid (5.2 g, yield: 96percent). ESI-MS (M+H) +: 273.1

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; BIOGEN MA INC.; HOPKINS, Brian, T.; MA, Bin; PRINCE, Robin; MARX, Isaac; LYSSIKATOS, Joseph, P.; ZHENG, Fengmei; PETERSON, Matthew; PATIENCE, Daniel, B.; (205 pag.)WO2018/191577; (2018); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 110661-91-1, name is tert-Butyl 4-bromobutanoate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of tert-Butyl 4-bromobutanoate

N-[cis-3-[(4-chlorophenyl)sulfonyl]-3-(2,5-diflupsilonorophenyl)cyclobutyl]-l .1,1- trifluoromethanesulfonaniide (190 mg, 0.388 mmol) was added to DMF (1.1 mL) and treated with potassium carbonate (59 mg, 0.427 mmol), tert -butyl 4-bromobutanoate (95 mg, 0.427 mmol). The mixture was heated to 80 C and stirred for 16 hours. The reaction was cooled to ambient temperature, diluted with ethyl acetate, and washed with 1/2 saturated brine solution twice. The organic layer was dried over anhydrous magnesium sulfate, filtered then concentrated in vacuo. The residue was purified by MPLC ( 0-30 % EtOAc:Hept) to give the title compound. MS: cal’d 654 (M Na+), exp 654 (M Na+)

The synthetic route of 110661-91-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; MILLER, Thomas; WO2010/68564; (2010); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Synthetic Route of 15963-40-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 15963-40-3, name is Methyl 3-methylenecyclobutanecarboxylate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

A dry three-neck flask was charged with methyl 3-methylenecyclobutanecarboxylate (6 g, 47.6 mmol) and dry THF (20 ml) and cooled to -10 C. BH3.THF (12.26 g, 143 mmol) was then added via a syringe dropwise. The resulting mixture was stirred for 4h at rt and was cooled to -20 C – 10C. Methanol was then added and the mixture was stirred for 15min. Sodium hydroxide (3M; 30 ml) and H2O2 (7.29 ml_, 238 mmol) were added in sequence. The mixture was stirred for 2h and a saturated sodium sulfite solution (100 ml) was added. The reaction mixture was diluted with water, then extracted with ethyl acetate, washed with water and brine, dried over sodium sulfate, filtered, and the residue was purified by flash chromatography eluting with (petroleum ether/EtOAc = 3/1 ) to afford methyl 3- (hydroxymethyl)cyclobutanecarboxylate (250 mg, 1 .387 mmol, 2.92 % yield) as a yellow oil.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 3-methylenecyclobutanecarboxylate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY DEVELOPMENT LIMITED; GLAXOSMITHKLINE (CHINA) R&D COMPANY LIMITED; BARBE, Guillaume; BOHNERT, Gary; CALANDRA, Nicholas; LAMBERT III, Millard Hurst; LU, Hongfu; LOBERA, Mercedes; RAMANJULU, Joshi; REN, Feng; YANG, Ting; (337 pag.)WO2019/63748; (2019); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

383-62-0, name is Ethyl 2-chloro-2,2-difluoroacetate, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. HPLC of Formula: C4H5ClF2O2

tert-Butyl 5-bromo-3-{(1S)-1-[2-chloro-6-(difluoromethoxy)-3-fluorophenyl]ethyl}-1H-pyrrolo[2,3-b]pyridine-1-carboxylate A mixture of tert-butyl 5-bromo-3-[(1S)-1-(2-chloro-3-fluoro-6-hydroxyphenyl)ethyl]-1H-pyrrolo[2,3-b]pyridine-1-carboxylate (1.00 g, 2.13 mmol), chlorodifluoroacetic acid ethyl ester (2.700 mL, 21.29 mmol), K2CO3 (882.7 mg, 6.387 mmol) and DMF (40 mL, 500 mmol) was heated to 70 C. for 6 h in a sealed tube. The material was extracted with EtOAc, and washed with water (3*). The organic layer was purified via column chromatography, eluting with 3-10% EtOAc/hexanes. The fractions containing the pure product were concentrated in vacuo to afford the title compound as a light yellow solid. 1H NMR (400 MHz, CD3OD): delta=1.67-1.69 (m, 9H), 1.80 (d, J=7.1 Hz, 3H), 4.94-5.03 (m, 1H), 6.63 (s, 1H), 7.15 (dd, J=9.1, 4.5 Hz, 1H), 7.22-7.28 (m, 1H), 7.55 (d, J=2.0 Hz, 1H), 7.70 (d, J=1.5 Hz, 1H), 8.34 (d, J=2.0 Hz, 1H). MS (ES+): m/z=519.03/521.03 (75/100) [MH+]. HPLC: tR=1.93 min (polar-3 min, HPLC-ACQUITY).

The synthetic route of 383-62-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; OSI Pharmaceuticals, LLC; US2011/281888; (2011); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 680217-71-4, name is Ethyl 2-(2,6-difluorophenyl)acetate, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C10H10F2O2

General procedure: To a stirred solution of phenyl acetic acid ethyl ester 1a (1 g, 6.09 mmol) in THF (10 mL) was added LiHMDS (9.1 ml, 1 M sol. in THF, 7.31 mmol) at -78 C and the reaction mixture was stirred at this temperature for 30 min. Ethyl-1-imidazole carboxylate 2 (1.2 g, 9.146 mmol) in dry THF (3 ml) was added drop wise to the reaction mixture at -78 C and stirred at rt for 3 h. The reaction mixture was quenched with saturated ammonium chloride solution and extracted with ethyl acetate. The combined organic layer was washed with water, saturated brine solution, and dried over Na2SO4. The solvent was evaporated under reduced pressure and the crude product was chromatographed on a silica gel column. Elution with 4% ethyl acetate/pet ether gave the pure compound 3a (1.1 g, 81% yield) as a colorless liquid.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 680217-71-4.

Reference:
Article; Behera, Manoranjan; Venkat Ragavan; Sambaiah; Erugu, Balaiah; Rama Krishna Reddy; Mukkanti; Yennam, Satyanarayana; Tetrahedron Letters; vol. 53; 9; (2012); p. 1060 – 1062;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 426-65-3, name is Ethyl Pentafluoropropionate, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of Ethyl Pentafluoropropionate

Pentafluoroethyl cyclopropylethynyl ketone, (XVI) can be synthesized in an analogous fashion using ethyl pentafluoropropionate in the above reaction.

According to the analysis of related databases, 426-65-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Pierce, Michael Ernest; Radesca, Lilian Alicia; US6348616; (2002); B1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics