Wang, Yuru et al. published their research in Polymers and Polymer Composites in 2021 | CAS: 6683-19-8

2,2-Bis(((3-(3,5-di-tert-butyl-4-hydroxyphenyl)propanoyl)oxy)methyl)propane-1,3-diyl bis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propanoate) (cas: 6683-19-8) belongs to esters. Esters are also usually derived from carboxylic acids. It may also be obtained by reaction of acid anhydride or acid halides with alcohols or by the reaction of salts of carboxylic acids with alkyl halides. Liquid esters of low volatility serve as softening agents for resins and plastics. Esters also include many industrially important polymers. Polymethyl methacrylate is a glass substitute sold under the names Lucite and Plexiglas; polyethylene terephthalate is used as a film (Mylar) and as textile fibres sold as Terylene, Fortrel, and Dacron.Related Products of 6683-19-8

Hindered phenolic antioxidants as heat-oxygen stabilizers for HDPE was written by Wang, Yuru;Ren, He;Yan, Yibin;He, Shuyan;Wu, Shuang;Zhao, Qian. And the article was included in Polymers and Polymer Composites in 2021.Related Products of 6683-19-8 This article mentions the following:

The effects of four hindered phenolic antioxidants in the short-term heat-oxygen stability of High-D. Polyethylene (HDPE) was evaluated by the Melt Flow Rate (MFR) and Oxidation Induction Time (OIT) analyses. The results showed that Irganox 1330 and Irganox 1010 had more excellent processing property and oxidation resistance behavior in HDPE than Irganox 1024 and Irganox 3114. The OIT values of HDPE with Irganox 1330 and Irganox 1010 were up to 97.25 min and 89.73 min resp. The long-term accelerated heat-oxygen stability tests of HDPE containing hindered phenolic antioxidants were carried out at 110°C in deionized water pressurized with pure oxygen at a pressure of 10 MPa. The characterization of the long-term heat-oxygen stability was performed by Fourier Transform IR (FTIR), Differential Scanning Calorimetry (DSC) and tensile testing. However, the results exhibited that the aging resistance of HDPE containing Irganox 1010 was inferior to that of HDPE containing Irganox 1024 and Irganox 3114, which is quite contrary to their short-term effect on HDPE stabilization. It may be speculated that the ester groups of Irganox 1010 undergo hydrolysis during the long-term heat-oxygen stability tests, leading to the formation of 3-(3,5-ditert-butyl-4-hydroxy-phenyl) propanoic acid and pentaerythritol. In the experiment, the researchers used many compounds, for example, 2,2-Bis(((3-(3,5-di-tert-butyl-4-hydroxyphenyl)propanoyl)oxy)methyl)propane-1,3-diyl bis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propanoate) (cas: 6683-19-8Related Products of 6683-19-8).

2,2-Bis(((3-(3,5-di-tert-butyl-4-hydroxyphenyl)propanoyl)oxy)methyl)propane-1,3-diyl bis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propanoate) (cas: 6683-19-8) belongs to esters. Esters are also usually derived from carboxylic acids. It may also be obtained by reaction of acid anhydride or acid halides with alcohols or by the reaction of salts of carboxylic acids with alkyl halides. Liquid esters of low volatility serve as softening agents for resins and plastics. Esters also include many industrially important polymers. Polymethyl methacrylate is a glass substitute sold under the names Lucite and Plexiglas; polyethylene terephthalate is used as a film (Mylar) and as textile fibres sold as Terylene, Fortrel, and Dacron.Related Products of 6683-19-8

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics