Tag: M.W=250-300

Bryuzgin, Evgeny published the artcileBiodegradation Control of Chitosan Materials by Surface Modification with Copolymers of Glycidyl Methacrylate and Alkyl Methacrylates, SDS of cas: 142-90-5, the main research area is glycidyl methacrylate chitosan biodegradation surface modification.

Chitosan is a promising polymer from natural polysaccharides, which is an environmentally friendly compound from renewable raw materials. Chitosan has biodegradability, biocompatibility, and antibacterial and other activities. In this article, we report the biodegradation control of chitosan materials by use of random copolymers based on glycidyl methacrylate and (fluoro)alkyl methacrylates as surface modifiers. We show that grafting of copolymers allows increasing the hydrophobicity of chitosan materials with initial contact angles up to 114° from 89° for films and up to 154° from 123° for aerogels. We demonstrate that modified aerogels retain contact angles of more than 150° for a long contact time with water while the initial aerogel fully wets for 30 s. The resulting chitosan aerogels have high porosity with a pore size of 100-200 μm, and the pore walls are 0.6-0.7-μm-thick film formations. Our study of lyophilic properties of modified chitosan substrates showed a change in the hydrophobicity of the materials as a function of length of the hydrocarbon radical in the side groups of the (fluoro)alkyl methacrylates in the copolymers. We demonstrate that the rate of biodegradation of the resulting materials decreases with an increase in the number of hydrophobic groups in the modifier. The obtained chitosan materials with hydrophobic coatings have potential as a protective layer for wound dressings with an extended service life.

Fibers and Polymers published new progress about Absorption. 142-90-5 belongs to class esters-buliding-blocks, name is Dodecyl 2-methylacrylate, and the molecular formula is C16H30O2, SDS of cas: 142-90-5.

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Liu, Hongpeng published the artcileShear deformation response of a holographic sensor based on elastic poly(MMA-co-LMA) photopolymer, HPLC of Formula: 142-90-5, the main research area is methyl lauryl methacrylate Shear photopolymer diffraction wavelength.

A holog. sensor based on camphorquinon doped poly (Me methacrylate-co-lauryl methacrylate) (poly (MMA-co-LMA)) elastic photopolymer is developed for characterizing the shear deformation of material. A shear angle and its transverse displacement, which are induced by a couple of shear stresses, are analyzed using a diffraction spectrum of a transmission holog. sensor. The dependence of the peak wavelength shift on the shear deformation presents a good linear relationship which provides a quant. characterization means. The detectable maximum of the shear angle exceeds 26.1 deg, and the peak wavelength shift closes to 4.0 nm. The available sensitivity is better than 3.33 deg/0.5 nm (shear angle/wavelength shift) using a com. spectrometer with 0.5 nm of resolution Finally, the reversibility response of shear deformation further confirmed the practical applicability of the elastic polymerbased shear deformation sensor. The spectrum measurement of shear deformation provides a novel measurement means for the mech. deformation of materials and expands the application of a holog. sensor.

Optics Letters published new progress about Diffraction. 142-90-5 belongs to class esters-buliding-blocks, name is Dodecyl 2-methylacrylate, and the molecular formula is C16H30O2, HPLC of Formula: 142-90-5.

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Xiang, Ming-Yue published the artcileLimited Fraction of Crystallized Side Chains in Bottlebrush Poly(n-alkyl methacrylate)s, Recommanded Product: Dodecyl 2-methylacrylate, the main research area is bottle brush polyalkyl methacrylate crystallization side chain.

Crystallinity of bottlebrush polymers due to side chain crystallization has been considered to be related to the length of the side chains only under the assumption of complete participation of crystallization by all side chains. Recent exptl. results revealed that in poly(n-alkyl methacrylate)s a fraction of side chains could not crystallize due to constraints imposed by the trapped main chain entanglements and required expansion of main chain-main chain distance. This result renders the original simplified consideration of the origin of crystallinity in bottlebrush polymers questionable. In this work, we introduce a new parameter fc, the fraction of crystallizable side chains, to better describe the crystallinity of bottlebrush polymers. A linear relationship between the melting enthalpy and the number of alkyl groups in side chains for bottlebrush polymers reported repeatedly indicates that fc remains essentially unchanged when bottlebrush polymers had the same main chain structure and grafting degree but different side chain lengths. The slope of the above-mentioned linear relationship is thus ΔHCH2 × fc, where ΔHCH2 stands for the melting enthalpy of one mole alkyl group packed into the crystal. With a known value of fc, it is possible to estimate the value of ΔHCH2. In case of poly(n-alkyl methacrylate)s, we estimated ΔHCH2 of hexagonal crystal being at most 5.74 kJ/mol with the knowledge of possibly smallest fc of 0.67 obtained from small angle X-ray scattering data. Therefore, the crystallinity of bottlebrush polymer would be calculated based on the equation Xc = fc × (Nc/N) with N and Nc being the number of alkyl groups in a side chain and those packed in the crystalline structure, resp. Both chem. structure and grafting degree of bottlebrush polymers affect fc.

Chinese Journal of Polymer Science published new progress about Callistemon. 142-90-5 belongs to class esters-buliding-blocks, name is Dodecyl 2-methylacrylate, and the molecular formula is C16H30O2, Recommanded Product: Dodecyl 2-methylacrylate.

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Xu, Xuetao published the artcileOil-polluted water purification via the carbon-nanotubes-doped organohydrogel platform, Formula: C16H30O2, the main research area is carbon organohydrogel thermal management solar driven water purification.

Solar-driven evaporators are promising for tackling freshwater scarcity but still challenged in simultaneously realizing comprehensive performances at one platform for sustainable and efficient application in real-world environments, such as stable-floating, scalability, salt-resistance, efficient vaporization, and anti-oil-fouling property. Herein, we design a hybrid organohydrogel evaporator to achieve the enduring oil contamination repulsion with maintaining accelerated evaporation process, and integrate capacities of ultra-stable floating, hindered salt-crystallization, large-scale fabrication for practical purification of seawater and polluted solutions The raised water surface surrounding evaporators, induced by low d. of organogel-phase, results in oil contamination resistance through the lateral capillary repulsion effect. Meanwhile, the organogel-phase containing photo-thermal carbon-nanotubes with low thermal capacity and conduction can form locally confined hot dots under solar irradiation and reduce heat dissipation on heating excessive water. Therefore, based on this approach, accelerated long-term practical purification of oil-contaminated solutions without any extra disposal is realized. Considering other properties of ultra-stable floating, large-scale fabrication, and anti-salt crystallization, these innovative organohydrogel evaporators open pathways for purifying oil-slick-polluted water via interfacial evaporation and are anticipated accelerating industrialization of efficient and sustainable solar-driven water purification

Nano Research published new progress about Capillarity. 142-90-5 belongs to class esters-buliding-blocks, name is Dodecyl 2-methylacrylate, and the molecular formula is C16H30O2, Formula: C16H30O2.

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Shibata, Motoki published the artcileMicellar aggregation and thermogelation of amphiphilic random copolymers in water hierarchically dependent on chain length, Related Products of esters-buliding-blocks, the main research area is micellar aggregation amphiphilic polymethacrylate hierarchical.

Micellar aggregates and thermoresponsive gelation of amphiphilic random copolymers in water were examined in detail, focused on effects of the d.p. (DP) on the behavior. For this purpose, we designed random copolymers carrying hydrophilic poly(ethylene glycol) and hydrophobic dodecyl groups, where the DP was varied from 63 to 358. The content of the hydrophobic monomer was set to 60 mol% to facilitate thermogelation. All the copolymers formed multichain aggregates in water, while the size distribution depended on DP. Since copolymers with larger DP had less composition distribution, the copolymers with 145 or more of DP formed size-controlled aggregates in water. Their concentrated solutions, above the overlap concentration of the aggregates, gelled entirely upon heating, followed by syneresis. In contrast, the short copolymer with 63 of DP formed aggregates with multimodal size distribution, and the concentrated solution underwent macroscopic phase separation upon heating, followed by gelation of the polymer-rich lower layer. As confirmed by small-angle neutron scattering, the copolymer suitable for thermogelation originally formed aggregates consisting of multiple micelle subunits in the aqueous dilute solution, and the thermogelation of the concentrated solution was driven by the phys. packing of the micelle subunits upon heating. Thus, we revealed that the DP hierarchically affected not only the self-assembly of the copolymers into size-controlled micellar aggregates in water but also the thermogelation of the concentrated solutions via intermicellar association

European Polymer Journal published new progress about Cloud point. 142-90-5 belongs to class esters-buliding-blocks, name is Dodecyl 2-methylacrylate, and the molecular formula is C16H30O2, Related Products of esters-buliding-blocks.

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Liu, Ya published the artcileGelator-Enhanced Organohydrogels with Switchable Mechanics and High-Strain Shape-Memory Capacity, Recommanded Product: Dodecyl 2-methylacrylate, the main research area is gelator organogel hydrogel.

Hydrogels and organogels, as two crucial representatives of soft materials, have attracted immense interest. However, they develop independently along two parallel lines, and these gels with single networks have their inherent drawbacks. For example, hydrogels tend to freeze, and organogels are usually brittle. Herein, organogels were incorporated into a hydrogel matrix for the synthesis of organohydrogels GOHs through polymerization in Pickering emulsion. The rigid organogel domains contribute to enhancing the strength of organohydrogels. Besides this, the organogels derived from 12-HAS self-assembly behavior exhibit a gel-sol transition when the temperature reaches 70°C, thus leading to a thermo-softening behavior in the GOHs. Due to the phase transition of organogel domains and the elastic hydrogel network, the resultant organohydrogels demonstrate high-strain shape-memory performance (over 1000%) which could help achieve full recovery in seconds. Consequently, GOHs are endowed with the potential of practical application in soft robots, wearable devices, and biol. materials.

Langmuir published new progress about Compression. 142-90-5 belongs to class esters-buliding-blocks, name is Dodecyl 2-methylacrylate, and the molecular formula is C16H30O2, Recommanded Product: Dodecyl 2-methylacrylate.

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Garuba, T. published the artcileProximate composition and chemical profiles of reishi mushroom (Ganoderma lucidum (Curt: Fr.) Karst), Application of Ethyl pentadecanoate, the main research area is proximate composition chem profile Ganoderma ethanol extract.

Ganoderma lucidum is a mushroom commonly used in folk medicine especially Traditional Chinese Medicine (TCM) but information on its nutritional and chem. profiles remains insufficient. This work aimed at evaluating proximate composition and identification of bioactive compounds in ethanolic extract of G. lucidum. Pulverized G. lucidum was suspended in ethanol in 1:10 and extraction was carried out by rotary evaporation to produce G. lucidum extract (GLE). Proximate composition of the sample was analyzed. Fourier Transform IR (FTIR) spectroscopy was carried out to identify different functional groups in GLE. Gas Chromatog.-Mass Spectrometry (GC-MS) was used to determine the bioactive compounds of the sample. Proximate anal. revealed that the amount of carbohydrate in sample was the highest (44.95%), followed by protein (15.75%). FTIR results showed that OH, C=O, C-OH, N-H 1* and 2* and alkyl halide are functional groups in GLE. A total of twelve (12) bioactive compounds were identified and the most prevailing compound in GLE was Et octadeca-9,12-dienoate (45.95%), followed by ethylhexadecanoate / Et palmitate (18.09%). Guaiacol (4.95%), octadecanoic acid (5.37%), ethylcyclohexane (3.31%) were also present. It can be inferred from this study that G. lucidum is nutritional and contains bioactive compounds that are useful in nutraceutical and pharmaceutical industries.

Journal of Scientific Research (Rajshahi, Bangladesh) published new progress about Biomass ash. 41114-00-5 belongs to class esters-buliding-blocks, name is Ethyl pentadecanoate, and the molecular formula is C17H34O2, Application of Ethyl pentadecanoate.

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Gao, Xiaomin published the artcileCucumber Fusarium wilt resistance induced by intercropping with celery differs from that induced by the cucumber genotype and is related to sulfur-containing allelochemicals, Application In Synthesis of 142-90-5, the main research area is transcriptomic intercropping celery genotype allelochem fusarium wilt resistance cucumber.

Fusarium wilt is a serious soil-borne disease for cucumber production; however, intercropping with celery and using resistant cultivars could alleviate this problem. The aims of the study were to verify whether cucumber Fusarium wilt resistance induced by intercropping with celery differs from that induced by the cucumber genotype and whether celery synthesizes organosulfur allelochems. to inhibit the growth of Fusarium oxysporum f. sp. cucumerinum (Foc). First, biochem. and transcriptome analyses were performed for the roots of two cucumber cultivars during the response to Foc infection in a monoculture system and cucumber/celery intercropping system, and the results indicated that the Fusarium wilt-resistant cucumber cultivar and cucumber intercropped with celery resulted in different immune responses against Foc inoculation. Then, the possible allelochems. in the fresh root and rhizosphere soil of celery were extracted with acetone, separated and purified by chromatog. four times and cocultured with Foc in vitro. Three organosulfur compounds, namely, thioglycolic acid, propanethiol and iso-Pr isothiocyanate, were identified from the chromatog. fractions, with the highest inhibition on Foc in the fourth chromatog. by gas chromatog./mass spectrometry. All these compounds exhibited inhibitory effects on Foc, but thioglycolic acid showed stronger inhibition than the other two compounds and completely inhibited the growth of Foc colonies at concentrations of 50-100μmol L-1. The information obtained will permit new management practices that prevent and control cucumber Fusarium wilt.

Scientia Horticulturae (Amsterdam, Netherlands) published new progress about Allelopathy. 142-90-5 belongs to class esters-buliding-blocks, name is Dodecyl 2-methylacrylate, and the molecular formula is C16H30O2, Application In Synthesis of 142-90-5.

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Sun, Xiuhua published the artcileStudy on the Core-Shell Reversion of PSBMA-b-PLMA Nanoparticles for the Fabrication of Antifouling Coatings, COA of Formula: C16H30O2, the main research area is core shell nanoparticle sulfobetaine lauryl methacrylate copolymer antifouling coating; PSBMA–PLMA nanoparticle; amphiphilic copolymer; antibacterial; antifouling; core−shell reversion.

In this paper, two series of poly(sulfobetaine methacrylate)-b-poly(lauryl methacrylate) (PSBMA-b-PLMA) diblock copolymers were prepared to investigate the core-shell reversion of amphiphilic copolymers. Exptl. results proved that the PSBMA-b-PLMA copolymers can be self-assembled as core-shell nanoparticles in chloroform. Moreover, 1H NMR spectra and contact angle measurements revealed that there is a transitional PSBMA/PLMA block ratio of 0.6, above which the nanoparticles are capable of switching their core and shell in aqueous solution Consequently, nanoparticles with PSBMA/PLMA block ratios above 0.6 showed superior antifouling and antibacterial abilities to those with block ratios below 0.4. Moreover, it was also found that the block chain length plays an important role in core-shell reversion as evidenced by 1H NMR spectra, water contact angle, and antifouling tests. As a result, coatings fabricated with the PLMA100 series of nanoparticles showed better antifouling abilities than those of the PLMA150 series at the same block ratio probably because of the thinner shell of PLMA100 copolymers. PSBMA100-b-PLMA100 was proved to be the best candidate for the fabrication of antifouling coatings as it exhibited the highest efficacy in antibacterial adhesion and antiprotein adsorption. This study provided a facile method to fabricate antifouling coatings by developing amphiphilic diblock copolymers with tuned hydrophobic/hydrophilic block ratio, block chain length, etc.

ACS Applied Materials & Interfaces published new progress about Amphiphiles. 142-90-5 belongs to class esters-buliding-blocks, name is Dodecyl 2-methylacrylate, and the molecular formula is C16H30O2, COA of Formula: C16H30O2.

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Kanno, Rikuto published the artcileReversible Co-Self-Assembly and Self-Sorting Systems of Polymer Micelles in Water: Polymers Switch Association Partners in Response to Salts, Category: esters-buliding-blocks, the main research area is self sorting system polymer micelle water switch partner.

Reversible self-sorting and co-self-assembly systems of amphiphilic synthetic mols. in water would bring innovative methodologies in creating repeatedly transformable multicomponent self-assemblies that are responsive to the outer environment and stimuli. Herein, we report reversible co-self-assembly and self-sorting systems of the binary blends of amphiphilic random copolymers bearing quaternary ammonium cation and dodecyl groups and those carrying poly(ethylene glycol) (PEG) chains and dodecyl groups in water. The cation copolymers co-self-assembled with the PEG copolymers to form cation/PEG-fused micelles in pure water, while the fused micelles self-sorted into discrete cation or PEG micelles in the presence of salts. Importantly, those random copolymers reversibly switch association partners in response to the presence or absence of salts in water. The size of the fused micelles was dependent on their copolymer composition but independent of the mixing ratio of cation and PEG copolymers. The fused micelles thus coexisted with the extra amount of cation or PEG micelles. We further revealed that the co-self-assembly and self-sorting of their copolymers are driven by the exchange of polymer chains between micelles like the exchange of subdomains in protein self-assemblies.

Macromolecules (Washington, DC, United States) published new progress about Amphiphiles. 142-90-5 belongs to class esters-buliding-blocks, name is Dodecyl 2-methylacrylate, and the molecular formula is C16H30O2, Category: esters-buliding-blocks.

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics