Tag: M.W=200-300

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 478375-40-5, name is Methyl 3-bromo-5-methylbenzoate, A new synthetic method of this compound is introduced below., Computed Properties of C9H9BrO2

AIBN (2,2′-azobis(2-methylpropionitrile)) (1.79 g) was added to methyl 3-bromo-5- methylbenzoate (50 g) and N-bromosuccinimide (44.7 g) in 350 mL acetonitrile, and the mixture was refluxed overnight. An additional 11 g of N-bromosuccinimide and 0.5 g of AIBN (2,2′-azobis(2- methylpropionitrile)) was added, and the re fluxing was continued for 3 hours. The mixture was concentrated, and then taken up in 500 mL ether, and stirred for 30 minutes. The mixture was then filtered, and the resulting solution was concentrated. The crude product was chromatographed on silica gel using 10% ethyl acetate in heptane to give the title compound.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ABBVIE INC.; BENATUIL, Lorenzo; BRUNCKO, Milan; JUDD, Andrew, S.; LI, Yingchun; MCCLUSKEY, Andrew; PHILLIPS, Andrew, C.; PHILLIPS, Darren, C.; SEAGAL, Jane; SOUERS, Andrew, J.; (608 pag.)WO2017/214458; (2017); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Related Products of 52727-57-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 52727-57-8, name is Methyl 2-amino-5-bromobenzoate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Compound 1a (18.60 g, 80.85 mmol) was dissolved in concentrated hydrochloric acid (200 mL, 12N), and an aqueous solution of sodium nitrite (6.69 g, 97.02 mmol) was slowly added dropwise at -10 to 0C. The reaction solution was at 0C. Stir for 1 hour. This reaction was added dropwise to a mixture of cuprous chloride (800 mg, 8.09 mmol) and sulfur dioxide (15.54 g, 242.55 mmol) at 0C. The resulting reaction solution was stirred at 0 C. for 1 hour and further warmed to 20 C. and stirred for 3 hours. After the reaction was completed, it was extracted with ethyl acetate (200 mL×3). The organic phases were combined, dried, concentrated to dryness under reduced pressure, and separated and purified by column chromatography on silica gel (petroleum ether/ethyl acetate=100-0%) to give Compound 1b (4.10 g).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 2-amino-5-bromobenzoate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Zhengda Tianqing Pharmaceutical Group Co., Ltd.; Nanjing Mingde Drug Discovery Co., Ltd.; Yao Yuanshan; Chen Bin; Chen Yuan; Li Ao; Xu Ran; Huang Zhensheng; Tian Dongdong; Li Hongwei; Yang Chengshuai; Li Jian; Chen Shuhui; (26 pag.)CN107987072; (2018); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Reference of 29263-94-3, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 29263-94-3 as follows.

A. To a solution of 2-amino-5-nitrophenol (6.00 g, 0.0326 mol) in 80 mL of DMF was added diethyl 2-bromo-2-methyl malonate (6.2 mL, 0.0326 mol) and potassium fluoride (4.74 g, 0.0815 mol). The reaction mixture was heated at 60 C. for 6 hours. Water was added to quench the reaction and the reaction mixture was extracted with EtOAc. The combined organic fractions were dried over MgSO4, filtered and the filtrate was concentrated to dryness. The residue was purified by chromatography (silica with hexanes and ethyl acetate) to afford 2-methyl-6-nitro-3-oxo-3,4-dihydro-2H-benzo[1,4]oxazine-2-carboxylic acid ethyl ester.

According to the analysis of related databases, 29263-94-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Calvo, Raul R.; Cheung, Wing S.; Player, Mark R.; US2006/116368; (2006); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

6091-64-1, name is Ethyl 2-bromobenzoate, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: Ethyl 2-bromobenzoate

General procedure: The following experimental procedure for the partial alkynylation of ethyl benzoate to 1,3-diphenylprop-2-yn-1-one is representative. A dry and argon-flushed flask, equipped with a magnetic stirring bar and a septum, was charged with phenyl acetylene (0.45 mL, 4.1 mmol) and THF (10 mL). After cooling to 0 C, n-BuLi (1.6 mL, 2.5 M in hexane, 4.0 mmol) was added dropwise and stirred for 1 h at room temperature. To the reaction mixture was slowly added morpholine (0.08 mL, 1.0 mmol) and stirred for 30 min at 0 C. Then, ethyl benzoate (0.14 mL, 1.0 mmol) was added and the mixture was stirred for 6 h again. The reaction was stopped by aqueous NH4Cl (aq) (10 mL) and extracted with diethyl ether (2 * 10 mL). The combined organic layers were dried over MgSO4, filtered, and concentrated under reduced pressure. Purification of the residue by column chromatography on silica gel yielded 1,3-diphenylprop-2-yn-1-one (175 mg, 85%). All products in Table 2 were confirmed by comparison with NMR data reported of authentic sample.7

The synthetic route of 6091-64-1 has been constantly updated, and we look forward to future research findings.

Reference:
Note; Shin, Won Kyu; Kim, Yu Ri; Im, So Hee; Jaladi, Ashok Kumar; Gundeti, Shankaraiah; An, Duk Keun; Bulletin of the Korean Chemical Society; vol. 39; 5; (2018); p. 683 – 686;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 346603-63-2, name is Methyl 2-methyl-3-(trifluoromethyl)benzoate, A new synthetic method of this compound is introduced below., SDS of cas: 346603-63-2

To a mixture of methyl 2-methyl-3-(trifluoromethyl)benzoate (15 g, 73.34 mmol) in acetic acid (100 mL) were added HNO3 (46 g) and bromine (12.8 g, 80.10 mmol). Then AgN03 (16.1 g, 2.5M in water) was added to above mixture over ~30 min. After stirred for 16 h at rt, The mixture was diluted with water. General Work-up Procedure 1 was followed. The residue was purified by Chromatography A to afford the title compound (14.0 g, 70%) as a colorless oil.

The synthetic route of 346603-63-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NURIX THERAPEUTICS, INC.; BARSANTI, Paul A.; BENCE, Neil F.; GOSLING, Jennifa; SAHA, Anjanabha; TAHERBHOY, Asad M.; ZAPF, Christoph W.; BOYLE, Kathleen; CARDOZO, Mario; MIHALIC, Jeffrey; LAWRENZ, Morgan; GALLOP, Mark; BRUFFEY, Jilliane; CUMMINS, Thomas; ROBBINS, Daniel; TANAKA, Hiroko; WANG, Chenbo; COHEN, Frederick; PALMER, Wylie; SANDS, Arthur T.; SHUNATONA, Hunter; (968 pag.)WO2019/148005; (2019); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2876-78-0, name is Methyl 1-Naphthaleneacetate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. name: Methyl 1-Naphthaleneacetate

Methylmagnesium bromide (3 M in ether, 10 mL, 30 mmol) was added dropwise to a solution of methyl naphthalene-1-acetate (2.0 g, 10 mmol) in tetrahydrofuran (20 mL) at 0 C. under a nitrogen atmosphere. After stirring at room temperature overnight, the reaction mixtures was quenched by the addition of water. The organic fraction was washed with brine, dried over sodium sulfate and concentrated under vacuum to give crude 2-methyl-1-(naphthalene-1-yl)propan-2-ol (2.0 g) as a yellow oil, which was used directly in the next step.The crude alcohol (2.0 g, 10 mmol) was dissolved in acetonitrile (10 mL) and concentrated sulfuric acid (4.9 g, 50 mmol) was added dropwise at 0 C. After stirring at room temperature for 2 hours, the reaction mixture was diluted with water and extracted with dichloromethane. The combined organic fractions were dried over sodium sulfate and evaporated. The residue was purified by silical gel column chromatography (petroleum ether/ethyl acetate) to give N-(2-methyl-1-(naphthalene-1-yl)propan-2-yl)acetamide (0.90 g, 37% yield) as a yellow solid.Concentrated hydrochloric acid (10 mL) was added to a solution of the intermediate acetamide (0.20 g, 0.83 mmol) in dioxane (2 mL) and the resulting mixture was refluxed for 3 days. After cooling to room temperature, the reaction mixture was basified to pH 9 by the addition of solid sodium bicarbonate. The mixture was extracted with ethyl acetate and the combined organic fractions were dried over sodium sulfate and concentrated to give crude 2-methyl-1-(naphthalene-1-yl)propan-2-amine (0.15 g, 23% yield) as a yellow oil, which was used without further purification.The crude amine (153 mg, 0.25 mmol), compound 1 (48 mg, 0.13 mmol) and potassium carbonate (36 mg, 0.25 mmol) were taken up in dioxane (2 mL) and heated to reflux overnight. The reaction mixture was concentrated under vacuum and the residue was purified by prep-HPLC to give compound A27 (16 mg, 23% yield) as a white solid: >99.5% purity (HPLC); MS m/z: 530.3 (M+1); 1H NMR (CDCl3, 500 MHz) delta 8.29 (d, J=8.0 Hz, 1H), 8.15 (d, J=7.0 Hz, 1H), 7.88 (d, J=6.5 Hz, 2H), 7.77 (d, J=8.0 Hz, 1H), 7.56 (t, JHF=54.0 Hz, 1H), 7.48 (m, 2H), 7.39 (m, 3H), 7.27 (d, J=7.0 Hz, 1H), 5.29 (s, 1H), 4.02-3.73 (m, 8H), 3.66 (s, 2H), 1.54 (s, 6H) ppm

The synthetic route of 2876-78-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Pathway Therapeutics Inc.; US2012/252802; (2012); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 51760-21-5 as follows. name: Dimethyl 5-bromoisophthalate

Step b) 5-(5-Methyl-l,l-dioxo-llambda*6*-ri,2,51thiadiazolidin-2-yl)-isophthalic acid dimethyl ester (Acid- 12b^; Tris(dibenzylideneacetone)palladium (27 mg, 0.029 mmol) was added to a degassed mixture of 5-bromo-isophthalic acid dimethyl ester (159 mg, 0.583 mmol), 2-methyl-[l,2,5]thiadiazolidine 1,1 -dioxide (Acid- 12a) (79 mg, 0.583 mmol), Cs2CO3 (474 mg, 1.46 mmol) and Xantphos (50.6 mg, 0.0874 mmol) in dioxane (5 ml). The mixture was heated at 105 0C under N2 for 2 h, the solvent was evaporated and the residue purified by flash chromatography using 2% MeOH in DCM as eluent, which gave the title compound (143 mg, 75%) as a yellow solid.

According to the analysis of related databases, 51760-21-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; MEDIVIR AB; LUNDBERG, Stina; AYESA, Susana; BELDA, Oscar; DORANGE, Ismet; ERSMARK, Karolina; HAMMER, Kristin; JOHANSSON, Per-Ola; LINDSTROeM, Stefan; ROSENQUIST, Asa; SAMUELSSON, Bertil; BAeCK, Marcus; KVARNSTROeM, Ingemar; WANGSELL, Fredrik; BJOeRKLUND, Katarina; WO2010/42030; (2010); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 20637-08-5, name is Methyl 4-(4-methoxyphenyl)butanoate, A new synthetic method of this compound is introduced below., Product Details of 20637-08-5

a) 5-(4-Methoxyphenyl)-1-(3-pyridinyl)-2-pentanone A solution of n-butyl lithium (28 ml of 1.6M in hexane, 0.124 mol) was added to a stirred solution of diisopropylamine (4.55 g, 0.045 mol) in dry tetrahydrofuran (50 ml) at 0C under a nitrogen atmosphere and the resulting yellow solution was stirred at 0C for 30 minutes. To the solution was added hexamethylphosphoramide (8.06g, 0.045 mol) and the resulting solution was stirred at 0C for 15 minutes. 3-Picoline (4.19g, 0.045 mol) was added to the reaction mixture and the resulting deep-red solution was stirred at 0C for 30 minutes. To the solution was added 4-(4-methoxyphenyl)butyric acid methyl ester (9.36g, 0.045 mol) in dry tetrahydrofuran (20 ml). The resulting mixture was stirred at 0C for 15 minutes and then at room temperature for an additional 90 minutes. The pale-yellow solution was extracted with hydrochloric acid (300 ml of 1M). The acid solution was washed with ethyl acetate (2 * 250 ml), made basic using potassium hydroxide and extracted with ethyl acetate (4 * 200 ml). The combined extracts were dried over anhydrous sodium sulfate and the solvent was removed under reduced pressure to yield a crude product. The crude product was purified by column chromatography (silica gel, chloroform) and recrystallized from ethyl acetate-hexane to yield 5-(4-methoxyphenyl)-1-(3-pyridinyl)-2-pentanone as a colorless crystalline solid, having a melting point of 35-37C and the following physical characteristics: Elemental analysis: C,75.31%, H,7.03%, N,5.11%; as against calculated values of C,75.31%; %,7.14%, N,5.17% for C17H19NO2·0.1H2O. 1H-NMR (delta-CDCl3): 1.82-1.98 (m,2H), 2.46-2.62 (m,2H), 2.53 (t,2H), 3.67 (s,2H), 3.79 (s,3H), 6.83 and 7.06 (ABq,4H), 7.23-7.31 (m,1H), 7.29-7.37 (m,1H), 8.39-8.46 (m,1H) and 8.50-8.56 (m,1H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; G.D. Searle & Co.; EP267439; (1988); A3;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Related Products of 87-13-8, These common heterocyclic compound, 87-13-8, name is Diethyl 2-(ethoxymethylene)malonate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Aniline (2.733 mL, 29.99 mMol) was stirred in diethyl ethoxymethylenemalonate (6.063 mL, 30.00 mMol) at 120-130C for 16.5 hours. T.l.c. analysis (ethyl acetate cyclohexane, 1 : 1) showed the presence of one UV-active product (Rf 0.84) and complete consumption of both starting materials. Upon cooling down of the reactionsolution to room temperature, intermediate diethyl 2-((phenylamino)methylene)malonate 35 solidified (as dark yellow crystalline solid,7.899 g, quant.). M.p. 36-37C; HRMS (EIj: found 263.11531 [M] C14H17N04requires 263.11521; Vmax (thin film): 3265, 3184 (w, NH), 3050 (w, ArC-H), 2981,2936, 2904, 2871 (m, alkyl C-H), 1717 (s, 2 x intramolecularly hydrogen-bondedC=O conjugated with C=C), 1691 (s, C=C-NH), 1655 (s, C=N-), 1623 (s, aryl conjugated C=C), 1255 (s, C-N stretch) cm?; 6H (CD3CN, 500 MHz): 1.31 (3H, t, JCH3,CH2 7.1 Hz, CH3), 1.32 (3H, t, JCH3,CH2 7.2 Hz, CH3), 4.19 (2H, q, JCH2,CH3 7.2 Hz, CH2), 4.25 (2H, q, JCH2,CH3 7.1 Hz, CH2), 7.16 (1H, tt, JparaArH,metaArHs 7.4 Hz, JparaArH,orthoArHs 1.1 Hz, para-ArH), 7.20 (2H, dt, Jortho&-Hs,metaArHs 7.6 Hz,JorthoArHsparaArH 1.0 Hz, 2 x orthoArHs), 7.38 (2H, m, J 7.4 Hz, 2 x metaArHs), 8.48(1H, d, JCH,NH 13.8 Hz, CH-NH), 10.81 (1H, d, JNH,CH 13.6 Hz, CH-NI]); 6c(CD3CN, 125 MHz): 14.1, 14.2 (2 x CH3), 60.3, 60.6(2 x CH2), 93.9 (O=C-C-C=O),117.6(2 x orthoArCs), 125.1 (paraArC), 130.1 (2 x metaArCs), 139.8 (ArCquat-NH),151.9 (NH-CH), 165.6 (C=O), 168.8 (hydrogen bonded C=O).

Statistics shows that Diethyl 2-(ethoxymethylene)malonate is playing an increasingly important role. we look forward to future research findings about 87-13-8.

Reference:
Patent; UCL BUSINESS PLC; SELWOOD, David; HOBBS, Adrian; WO2015/189560; (2015); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Related Products of 40876-98-0, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 40876-98-0, name is Sodium 1,4-diethoxy-1,4-dioxobut-2-en-2-olate, This compound has unique chemical properties. The synthetic route is as follows.

5-Aminopyrazole (25 g) and diethyl oxalacetate sodium salt (74.4 g) were dissolved under cooling in 1 N hydrochloric acid. 68.75 ml_ of glacial acetic acid were added and the mixture was stirred at 80C for 14 h. The mixture was cooled to room temperature and the formed precipite was filtered off and titurated in ethyl acetate to give 16.06 g (26%) of the desired product.LC/MS (Method LC1 ): Rt = 0.86 min; m/z = 208.07 [M+H]+.

The chemical industry reduces the impact on the environment during synthesis Sodium 1,4-diethoxy-1,4-dioxobut-2-en-2-olate. I believe this compound will play a more active role in future production and life.

Reference:
Patent; SANOFI; Plettenburg, Oliver; Loehn, Matthias; Mendez-Perez, Maria; Hachtel, Stephanie; Podeschwa, Michael; Kannt, Aimo; Ivashchenko, Yuri; Bjergarde, Kirsten; WO2013/60636; (2013); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics