Tag: M.W=200-300

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 346603-63-2, name is Methyl 2-methyl-3-(trifluoromethyl)benzoate, A new synthetic method of this compound is introduced below., Recommanded Product: 346603-63-2

To a mixture of methyl 2-methyl-3-(trifluoromethyl)benzoate (15 g, 73.34 mmol) in acetic acid (100 mL) were added HNO3 (46 g) and bromine (12.8 g, 80.10 mmol). Then AgN03 (16.1 g, 2.5M in water) was added to above mixture over ~30 min. After stirred for 16 h at rt, The mixture was diluted with water. General Work-up Procedure 1 was followed. The residue was purified by Chromatography A to afford the title compound (14.0 g, 70%) as a colorless oil.

The synthetic route of 346603-63-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NURIX THERAPEUTICS, INC.; BARSANTI, Paul A.; BENCE, Neil F.; GOSLING, Jennifa; SAHA, Anjanabha; TAHERBHOY, Asad M.; ZAPF, Christoph W.; BOYLE, Kathleen; CARDOZO, Mario; MIHALIC, Jeffrey; LAWRENZ, Morgan; GALLOP, Mark; BRUFFEY, Jilliane; CUMMINS, Thomas; ROBBINS, Daniel; TANAKA, Hiroko; WANG, Chenbo; COHEN, Frederick; PALMER, Wylie; SANDS, Arthur T.; SHUNATONA, Hunter; (968 pag.)WO2019/148005; (2019); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

59247-47-1, name is tert-Butyl 4-bromobenzoate, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. HPLC of Formula: C11H13BrO2

(2S,3’S)-2-Methyl-[1,3′]bipyrrolidinyl dihydrochloride (8) (1.1 g, 4 mmol) was treated with NaOt-Bu (1.1 g, 2equiv) in MeOH (30 mL), filtered, and concentrated. To this flask was added tert-butyl-4-bromo-benzoate (9) (1.0 g, 3.89 mmol), sodium tert-butoxide (538 mg, 5.6 mmol), tris(dibenzylideneacetone)-dipalladium-(0) (35 mg, 0.039 mmol), BINAP (72 mg, 0.116 mmol), and toluene (40 mL) under nitrogen. The reaction flask was heated to 80 °C (external) for 24 h with stirring until the starting material was completely consumed as judged by TLC analysis. The mixture was cooled to room temperature, taken up in DCM (50 mL), filtered, and concentrated. The crude product was then purified by a silica gel flash chromatography eluted with 0-5percent of 7 N NH3/MeOH in DCM to get 1.02 g (80percent) of the title compound as a yellow oil. LCMS: RT = 2.23 min, MS: 331 (M+H+). 1H NMR (300 MHz, CDCl3) delta 7.87 (d, J = 8.7 Hz, 2H), 6.49 (d, J = 8.7 Hz, 2H), 3.6-3.23 (m, 5H), 3.01 (m, 1H), 2.78 (m, 1H), 2.55 (q, J = 8.4 Hz, 1H), 2.22-1.43 (m, 13H), 1.14 (d, J = 6.3 Hz, 3H).

The synthetic route of 59247-47-1 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Gao, Zhongli; Hurst, William J.; Hall, Daniel; Hartung, Ryan; Reynolds, William; Kang, Jiesheng; Nagorny, Raisa; Hendrix, James A.; George, Pascal G.; Bioorganic and Medicinal Chemistry; vol. 23; 3; (2015); p. 429 – 438;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Electric Literature of 29263-94-3, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 29263-94-3 as follows.

A. To a solution of 2-amino-5-nitrophenol (6.00 g, 0.0326 mol) in 80 mL of DMF was added diethyl 2-bromo-2-methyl malonate (6.2 mL, 0.0326 mol) and potassium fluoride (4.74 g, 0.0815 mol). The reaction mixture was heated at 60 C. for 6 hours. Water was added to quench the reaction and the reaction mixture was extracted with EtOAc. The combined organic fractions were dried over MgSO4, filtered and the filtrate was concentrated to dryness. The residue was purified by chromatography (silica with hexanes and ethyl acetate) to afford 2-methyl-6-nitro-3-oxo-3,4-dihydro-2H-benzo[1,4]oxazine-2-carboxylic acid ethyl ester.

According to the analysis of related databases, 29263-94-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Calvo, Raul R.; Cheung, Wing S.; Player, Mark R.; US2006/116368; (2006); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Reference of 40876-98-0, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 40876-98-0, name is Sodium 1,4-diethoxy-1,4-dioxobut-2-en-2-olate, This compound has unique chemical properties. The synthetic route is as follows.

5-Aminopyrazole (25 g) and diethyl oxalacetate sodium salt (74.4 g) were dissolved under cooling in 1 N hydrochloric acid. 68.75 ml_ of glacial acetic acid were added and the mixture was stirred at 80C for 14 h. The mixture was cooled to room temperature and the formed precipite was filtered off and titurated in ethyl acetate to give 16.06 g (26%) of the desired product.LC/MS (Method LC1 ): Rt = 0.86 min; m/z = 208.07 [M+H]+.

The chemical industry reduces the impact on the environment during synthesis Sodium 1,4-diethoxy-1,4-dioxobut-2-en-2-olate. I believe this compound will play a more active role in future production and life.

Reference:
Patent; SANOFI; Plettenburg, Oliver; Loehn, Matthias; Mendez-Perez, Maria; Hachtel, Stephanie; Podeschwa, Michael; Kannt, Aimo; Ivashchenko, Yuri; Bjergarde, Kirsten; WO2013/60636; (2013); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 20637-08-5, name is Methyl 4-(4-methoxyphenyl)butanoate, A new synthetic method of this compound is introduced below., COA of Formula: C12H16O3

a) 5-(4-Methoxyphenyl)-1-(3-pyridinyl)-2-pentanone A solution of n-butyl lithium (28 ml of 1.6M in hexane, 0.124 mol) was added to a stirred solution of diisopropylamine (4.55 g, 0.045 mol) in dry tetrahydrofuran (50 ml) at 0C under a nitrogen atmosphere and the resulting yellow solution was stirred at 0C for 30 minutes. To the solution was added hexamethylphosphoramide (8.06g, 0.045 mol) and the resulting solution was stirred at 0C for 15 minutes. 3-Picoline (4.19g, 0.045 mol) was added to the reaction mixture and the resulting deep-red solution was stirred at 0C for 30 minutes. To the solution was added 4-(4-methoxyphenyl)butyric acid methyl ester (9.36g, 0.045 mol) in dry tetrahydrofuran (20 ml). The resulting mixture was stirred at 0C for 15 minutes and then at room temperature for an additional 90 minutes. The pale-yellow solution was extracted with hydrochloric acid (300 ml of 1M). The acid solution was washed with ethyl acetate (2 * 250 ml), made basic using potassium hydroxide and extracted with ethyl acetate (4 * 200 ml). The combined extracts were dried over anhydrous sodium sulfate and the solvent was removed under reduced pressure to yield a crude product. The crude product was purified by column chromatography (silica gel, chloroform) and recrystallized from ethyl acetate-hexane to yield 5-(4-methoxyphenyl)-1-(3-pyridinyl)-2-pentanone as a colorless crystalline solid, having a melting point of 35-37C and the following physical characteristics: Elemental analysis: C,75.31%, H,7.03%, N,5.11%; as against calculated values of C,75.31%; %,7.14%, N,5.17% for C17H19NO2·0.1H2O. 1H-NMR (delta-CDCl3): 1.82-1.98 (m,2H), 2.46-2.62 (m,2H), 2.53 (t,2H), 3.67 (s,2H), 3.79 (s,3H), 6.83 and 7.06 (ABq,4H), 7.23-7.31 (m,1H), 7.29-7.37 (m,1H), 8.39-8.46 (m,1H) and 8.50-8.56 (m,1H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; G.D. Searle & Co.; EP267439; (1988); A3;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1245643-11-1, name is Methyl 3,4-diamino-5-bromobenzoate, This compound has unique chemical properties. The synthetic route is as follows., name: Methyl 3,4-diamino-5-bromobenzoate

In a sealed glassware, a mixture of intermediate 3a and intermediate 3b (75/25) (10 g; 28.39 mmol), N-boc-2,3-dihydro-lH-pyrrole (6.86 mL; 39.75 mmol) and K2CO3 (11.8 g; 85.18 mmol) in 1,4-dioxane (250 mL) was bubbled with N2. Then, PPh3(1.49 g; 5.68 mmol) and Pd(OAc)2(640 mg; 2.84 mmol) were added. The reaction mixture was heated to 100C for 5h. The reaction mixture was cooled down to rt, poured onto water and extracted with EtOAc. The organic layer was decanted, washed with brine, dried over MgS04, filtered and evaporated to dryness. The residue (21 g) was purified by chromatography over silica gel (irregular SiOH; 20-45 muiotaeta; 450 g; mobile phase: 62%> heptane, 3% MeOH (+10% NH4OH), 35% EtOAc). The pure fractions were collected and evaporated to dryness yielding 2.3 g (17%>, impure) of intermediate 16a and 8.2 g (59%) of intermediate 16a.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1245643-11-1.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; ANGIBAUD, Patrick, Rene; QUEROLLE, Olivier, Alexis, Georges; BERTHELOT, Didier, Jean-Claude; MEYER, Christophe; WILLOT, Matthieu, Philippe, Victor; MEERPOEL, Lieven; JOUSSEAUME, Thierry, Francois, Alain, Jean; (114 pag.)WO2018/178280; (2018); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Related Products of 49851-36-7, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 49851-36-7, name is Methyl 2-(2-aminophenyl)acetate hydrochloride, This compound has unique chemical properties. The synthetic route is as follows.

TEA (0.276 ml_, 1 .984 mmol) was added to a mixture of 3-bromobenzoic acid (199 mg, 0.992 mmol) and HATU (415 mg, 1 .091 mmol) in DMF at 23 C. In a separate vial, methyl 2-(2- aminophenyl)acetate hydrochloride (CAS 49851 -36-7) (200 mg, 0.992 mmol) was stirred with TEA (0.276 ml_, 1 .980 mmol) in DMF (0.5 ml_). After 5 min, the solution of methyl 2-(2- aminophenyl)acetate hydrochloride (200 mg, 0.992 mmol) was added to the 3-bromobenzoic acid (199 mg, 0.992 mmol) mixture and the resulting mixture was stirred at rt for 30 min. The reaction mixture was diluted with EtOAc and washed with water. The aqueous layer was extracted with EtOAc. The combined organics were washed with 5% aq LiCI, dried (Na2S04) and concentrated. The resulting residue was purified by silica gel chromatography (EtOAc- heptanes 0-60%) to provide the title compound. MS (ESI+) m/z 348.0, 350.0 (M+H).

The chemical industry reduces the impact on the environment during synthesis Methyl 2-(2-aminophenyl)acetate hydrochloride. I believe this compound will play a more active role in future production and life.

Reference:
Patent; NOVARTIS AG; BELANGER, David B.; FLOHR, Stefanie; GELIN, Christine Fang; JENDZA, Keith; JI, Nan; LIU, Donglei; LORTHIOIS, Edwige Liliane Jeanne; KARKI, Rajeshri Ganesh; MAINOLFI, Nello; POWERS, James J.; RANDL, Stefan Andreas; ROGEL, Olivier; VULPETTI, Anna; YOON, Taeyoung; WO2015/9977; (2015); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 69812-51-7, name is Methyl 4-chlorosulfonylbenzoate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 69812-51-7, Formula: C8H7ClO4S

General procedure: To a solution of 23 (313 mg, 1 mmol) in DMF (1 mL), was addedtriethylamine (210 mg, 2.05 mmol), methyl 4-chlorosulfonyl benzoate27c (235 mg, 1 mmol) and 4-dimethylaminopyridine (10 mg). Themixture was stirred at rt for 4 h. The solvent was removed and the residuewas purified by a silica column with CHCl3 and MeOH to afford356 mg of 24f as a white solid in 75% yield. TLC Rf 0.13 (CHCl3/MeOH,40:1); 1H NMR (DMSO-d6) delta 1.25 (s, 9H, Piv), 2.61 (s, 3H, NCH3), 3.91(s, 3H, OCH3), 4.21 (s, 2H, NCH2), 6.28 (s, 1H, 5-H), 7.95 (d,J=8.0 Hz, 2H, Ph), 8.18 (d, J=8.0 Hz, 2H, Ph), 10.85 (s, 1H, exch,PivNH), 11.66 (s, 1H, exch, NH), 11.88 (s, 1H, exch, NH).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Xiang, Weiguo; Dekhne, Aamod; Doshi, Arpit; O’Connor, Carrie; Hou, Zhanjun; Matherly, Larry H.; Gangjee, Aleem; Bioorganic and Medicinal Chemistry; vol. 27; 23; (2019);,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Synthetic Route of 87-13-8, These common heterocyclic compound, 87-13-8, name is Diethyl 2-(ethoxymethylene)malonate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Aniline (2.733 mL, 29.99 mMol) was stirred in diethyl ethoxymethylenemalonate (6.063 mL, 30.00 mMol) at 120-130C for 16.5 hours. T.l.c. analysis (ethyl acetate cyclohexane, 1 : 1) showed the presence of one UV-active product (Rf 0.84) and complete consumption of both starting materials. Upon cooling down of the reactionsolution to room temperature, intermediate diethyl 2-((phenylamino)methylene)malonate 35 solidified (as dark yellow crystalline solid,7.899 g, quant.). M.p. 36-37C; HRMS (EIj: found 263.11531 [M] C14H17N04requires 263.11521; Vmax (thin film): 3265, 3184 (w, NH), 3050 (w, ArC-H), 2981,2936, 2904, 2871 (m, alkyl C-H), 1717 (s, 2 x intramolecularly hydrogen-bondedC=O conjugated with C=C), 1691 (s, C=C-NH), 1655 (s, C=N-), 1623 (s, aryl conjugated C=C), 1255 (s, C-N stretch) cm?; 6H (CD3CN, 500 MHz): 1.31 (3H, t, JCH3,CH2 7.1 Hz, CH3), 1.32 (3H, t, JCH3,CH2 7.2 Hz, CH3), 4.19 (2H, q, JCH2,CH3 7.2 Hz, CH2), 4.25 (2H, q, JCH2,CH3 7.1 Hz, CH2), 7.16 (1H, tt, JparaArH,metaArHs 7.4 Hz, JparaArH,orthoArHs 1.1 Hz, para-ArH), 7.20 (2H, dt, Jortho&-Hs,metaArHs 7.6 Hz,JorthoArHsparaArH 1.0 Hz, 2 x orthoArHs), 7.38 (2H, m, J 7.4 Hz, 2 x metaArHs), 8.48(1H, d, JCH,NH 13.8 Hz, CH-NH), 10.81 (1H, d, JNH,CH 13.6 Hz, CH-NI]); 6c(CD3CN, 125 MHz): 14.1, 14.2 (2 x CH3), 60.3, 60.6(2 x CH2), 93.9 (O=C-C-C=O),117.6(2 x orthoArCs), 125.1 (paraArC), 130.1 (2 x metaArCs), 139.8 (ArCquat-NH),151.9 (NH-CH), 165.6 (C=O), 168.8 (hydrogen bonded C=O).

Statistics shows that Diethyl 2-(ethoxymethylene)malonate is playing an increasingly important role. we look forward to future research findings about 87-13-8.

Reference:
Patent; UCL BUSINESS PLC; SELWOOD, David; HOBBS, Adrian; WO2015/189560; (2015); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Application of 135484-83-2,Some common heterocyclic compound, 135484-83-2, name is Methyl 2-amino-4-bromobenzoate, molecular formula is C8H8BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To toluene 12mL solution of methyl 2-amino-4-bromobenzoate 1.2g were added 1-fluoro-4-iodobenzene 1.5mL, cesium carbonate 3.4g, palladium acetate 12mg and rac-2,2′-bis(diphenylphosphino)-1,1′-binaphthyl 32mg at room temperature, and it was heated and refluxed under nitrogen atmosphere for 12 hours. After the reaction mixture was cooled to room temperature, palladium acetate 12mg and rac-2,2′-bis(diphenylphosphino)-1,1′-binaphthyl 32mg were added to it, and it was heated and refluxed under nitrogen atmosphere for 12 hours. After the reaction mixture was cooled to room temperature, water was added to it. The organic layer was separated and collected, dried over anhydrous magnesium sulfate after sequential washing with 1.0mol/L hydrochloric acid and saturated sodium chloride aqueous solution, and the solvent was removed under reduced pressure. The obtained residue was refined by silica gel column chromatography [Fuji SILYSIA Chemical Ltd., PSQ100B (spherical type), eluent; hexane:ethyl acetate=10:1] to give methyl 4-bromo-2-(4-fluoroanilino)benzoate 0.20g of pale yellow solid. 1H-NMR(DMSO-d6) delta value: 3.86(3H,s),6.94(1H,dd,J=8.6,1.7Hz),7.04(1H,d,J=1.7Hz),7 .24-7.35(4H,m),7.80(1H,d,J=8.6Hz),9.27(1H,s).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Methyl 2-amino-4-bromobenzoate, its application will become more common.

Reference:
Patent; TOYAMA CHEMICAL CO., LTD.; EP1860098; (2007); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics