Tag: M.W=100-200

426-65-3, Name is Ethyl Pentafluoropropionate, 426-65-3, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows.

EXAMPLE 2 Potassium perfluoropropionate The procedure of Example 1 was followed using ethyl perfluoropropionate (4.8 g, 25 mmol), potassium trimethylsilanolate (3.2 g, 25 mmol), and dry ether (150 mL). Potassium perfluoropropionate (4.7 g, 93% yield) was isolated as a white solid: 19 F NMR (D2 O) delta -79.5 (m, CF3, 3F), -117.5 (m, CF2, 2F). Anal. Calcd. for C3 F5 KO2: C, 17.83; F, 47.00; K, 19.35. Found: C, 17.52; F, 46.83; K, 19.24.

Statistics shows that Ethyl Pentafluoropropionate is playing an increasingly important role. we look forward to future research findings about 426-65-3.

Reference:
Patent; E. I. Du Pont de Nemours and Company; US4723016; (1988); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

344-14-9, These common heterocyclic compound, 344-14-9, name is Dimethyl 2-fluoromalonate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

First, put a stir bar in a 35 mL sealed tube, and then add methyl propargyl ether (28 muL, 0.33 mmol), 0.9 mL tetrahydrofuran (0.9 mL), and 2-chloroacetamidoquinoline (66.2 mg, 0.3 mmol), dimethyl 2-fluoromalonate (70.4 mg, 0.45 mmol). To the mixed solution were added CuI (5.7 mg, 0.03 mmol) and Cs2CO3 (117.3 mg, 0.36 mmol) in this order. The glass tube was filled with N2 for 3 minutes, the air was fully expelled, the nozzle was sealed with a cock, and the reaction was stirred at 800C for 1.5 hours. After the reaction was completed, the system was cooled to room temperature, 2 ml of distilled water was added to the reaction system, and ethyl acetate was used. After extraction, the organic phases were combined, and the solvent of the organic phase was distilled off under reduced pressure. 86.1 mg of the product was separated by silica gel column chromatography in 4d, and the yield was 71%.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 344-14-9.

Reference:
Patent; Anyang Normal University; Lv Yunhe; Pu Weiya; Wang Xin; Wang Xiaoxing; (15 pag.)CN110627718; (2019); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

344-14-9, The chemical industry reduces the impact on the environment during synthesis 344-14-9, name is Dimethyl 2-fluoromalonate, I believe this compound will play a more active role in future production and life.

General procedure: [Pd(C3H5)Cl]2 (0.004 mmol, 4 mol%), [6-(allyloxymethyl)-N-(2-((R)-((S)-1-(3,5-dimethoxyphenyl)propyl)sulfinyl)phenyl)picoli-namide] (6b, 0.008 mmol, 8 mol%), and (E)-1,3-disubstituted allyl acetates 7 (0.1 mmol) were dissolved in THF (2.0 mL) in a dry Schlenk tube filled with argon. The reaction mixture was stirred for 30 min at room temperature. Then Cs2CO3 (3.0 equiv) and dimethyl 2-fluoromalonate 8 (0.3 mmol, 3.0 equiv) were added. After the completion of the reaction monitoring by TLC, the crude reaction mixture was filtrated with celite and the solvent was removed under reduced pressure. The crude residue was purified by flash column chromatography (petroleum ether/ethyl acetate) to give the desired products 9.

The chemical industry reduces the impact on the environment during synthesis Dimethyl 2-fluoromalonate. I believe this compound will play a more active role in future production and life.

Reference:
Article; Zhang, Min; Zhao, Mingzhu; Zheng, Purui; Zhang, Hongbo; Zhao, Xiaoming; Journal of Fluorine Chemistry; vol. 189; (2016); p. 13 – 21;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

13831-03-3, A common heterocyclic compound, 13831-03-3, name is tert-Butyl propiolate, molecular formula is C7H10O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A dry, argon-filled Schlenk tube with a magnetic stirrer bar and septum is initially charged with tert-butyl prop-2-ynoate (70 mg, 0.56 mmol) in anhydrous THF (2 ml). After adding (TMP)2Zn.MgCl2 (2.2 ml, 1.2 mmol) at 25C, the mixture is stirred for 30 min, then a solution of l -fluoro-3-iodobenzene (160 mg, 0.72 mmol), tetrakis(triphenylphosphine)palladium(0) (33 mg, 5 mol%>) in anhydrous THF (2 ml) is added dropwise and the mixture is stirred at 25C overnight. For workup, the mixture is diluted with aqueous sat. NH4CI solution (30 ml) and extracted with ethyl acetate (3 x 30 ml). After the combined organic phases have been dried over Na2S04, the solvent has been distilled off and purification has been effected by column chromatography on silica gel (heptane : ethyl acetate), the desired compound (91 mg, 75% of theory) was obtained as a colourless oil. ? NMR (400 MHz, CDC13): delta in ppm = 7.34 (m, 2H), 7.26 (m, 1H), 7.13 (m, 1H), 1.53 (s, 9H) Preparation of ethyl 4-(2-chloro-

The synthetic route of 13831-03-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BAYER INTELLECTUAL PROPERTY GMBH; BAYER CROPSCIENCE AG; FORD, Mark, James; MOSRIN, Marc; WO2013/120911; (2013); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 37466-90-3, name is Ethyl 3,4-diaminobenzoate, This compound has unique chemical properties. The synthetic route is as follows., 37466-90-3

General procedure: Ethyl-3-amino-4-(2-substituted amino)benzoate, 3 (1 mmol) and various sodium bisulfite adducts, 4 (1.5 mmol) were dissolved in DMF (5 mL). The reaction mixture was stirred at 90 C under N2 atmosphere for 24-48 h. After completion of reaction (evident by TLC), the reaction mixture was diluted in ethyl acetate (25 mL) and washed with water (10 mL¡Á3). The organic layer was collected, dried over Na2SO4 and evaporated under reduced pressure to afford crude products. Final compounds 5-7 were obtained in 38-90% yields after recrystallization from ethanol or column purification.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Yoon, Yeong Keng; Ali, Mohamed Ashraf; Wei, Ang Chee; Choon, Tan Soo; Ismail, Rusli; European Journal of Medicinal Chemistry; vol. 93; (2015); p. 614 – 624;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

These common heterocyclic compound, 10601-80-6, name is Ethyl 3,3-diethoxypropionate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 10601-80-6

General procedure: A mixture of montmorillonite K-10 (75 mg), an appropriate aniline 1 (150 mg, 1.2 mmol), ethyl-3,3-diethoxypropionate (3) (579 mg, 3 mmol) and an aldehyde (166 mg, 1.34 mmol) in pure water (7.5 mL) was stirred at 90 C for the time mentioned in Table 2. After completion of the reaction (indicated by TLC), the mixture was cooled to room temperature and filtered. The filtrate was extracted with EtOAc (3 ¡Á 5 mL). The organic layers were collected, combined, dried over anhydrous Na2SO4, filtered and concentrated under reduced pressure. The residue was purified by column chromatography on silica gel using ethyl acetate-hexane to give the desired product.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 10601-80-6.

Reference:
Article; Reddy, T. Ram; Reddy, G. Rajeshwar; Reddy, L. Srinivasula; Meda, Chandana Lakshmi T.; Parsa, Kishore V.L.; Kumar, K. Shiva; Lingappa; Pal, Manojit; European Journal of Medicinal Chemistry; vol. 62; (2013); p. 395 – 404;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

1559-02-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1559-02-0, name is Diethyl 1,1-cyclopropanedicarboxylate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Example 64 Preparation of ethyl 1-(hydroxymethyl)cyclopropanecarboxylate A 1M solution of lithium aluminum tri-tert-butoxyhydride in tetrahydrofuran (70.90 mL, 70.90 mmol) was added to a stirred solution of diethyl cyclopropane-1,1′-dicarboxylate (6 g, 32.20 mmol) in tetrahydrofuran (129 mL) at 23 C. The resulting solution was heated to 65 C. and stirred for 24 h. The cooled reaction mixture was diluted with a 10% solution of sodium bisulfate (275 mL) and extracted with ethyl acetate. The combined organic layers were dried (MgSO4), filtered, and concentrated to dryness to give the desired product as a pale yellow oil (4.60, 91%): 1H NMR (300 MHz, CDCl3) delta 4.16 (q, J=7 Hz, 2H), 3.62 (s, 2H), 2.60 (br s, 1H), 1.22-1.30 (m, 5H), 0.87 (dd, J=7, 4 Hz, 2H).

The synthetic route of 1559-02-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Dow AgroSciences LLC; Buysse, Ann M.; Niyaz, Noormohamed M.; Demeter, David A.; Zhang, Yu; Walsh, Martin J.; Kubota, Asako; Hunter, Ricky; Trullinger, Tony K.; Lowe, Christian T.; Knueppel, Daniel I.; Patny, Akshay; Garizi, Negar; LePlae, JR., Paul Renee; Wessels, Frank J.; Ross, JR., Ronald; DeAmicis, Carl; Borromeo, Peter; (118 pag.)US2016/60245; (2016); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

28868-76-0, The chemical industry reduces the impact on the environment during synthesis 28868-76-0, name is Dimethyl 2-chloromalonate, I believe this compound will play a more active role in future production and life.

(1) In a 1 L reaction flask equipped with mechanical stirring, temperature display and distillation column, 430 ml of anhydrous dioxane was added.166.6 g of dimethyl chloromalonate and 10 g of dried potassium iodide;(2) 87.5 g of anhydrous potassium fluoride was activated by microwave drying, and added to the above reaction bottle;(3) heating to 100 C under reflux, and reacting for 1 hour;(4) collecting a fraction of 74-78 C through a distillation column;(5) The distillation temperature is up to 78 C to stop heating, to obtain crude dimethyl 2-fluoromalonate;(6) A total of 160g of crude product was collected, and the content of dimethyl 2-fluoromalonate was 91.6%, which was equivalent to 146.6 g of pure product;(7) Refining obtained 136 g of dimethyl 2-fluoromalonate, the content was 99.5%, and the yield was 90.2%.

The chemical industry reduces the impact on the environment during synthesis Dimethyl 2-chloromalonate. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Sinopharm Group Chemical Reagent Co., Ltd.; Guo Jianguo; Gu Xiaoyan; Wu Xiaolan; Huang Hao; (4 pag.)CN109824512; (2019); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

61367-07-5, name is Methyl trans-4-aminocyclohexanecarboxylate hydrochloride, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. 61367-07-5

To a stirred solution of 6-((1,6-naphthyridin-2-yl)amino)-4-(cyclopropylamino)nicotinic acid (1.85 g, 5.76 mmol, Intermediate N) and methyl (1R,4R)-4-aminocyclohexane-1-carboxylate hydrochloride (1.34 g, 6.91 mmol) in DMF (10 mL) was added DIPEA (5 mL, 28.8 mmol) and PyBOP (4.5 g, 8.64 mmol) at rt. The resulting reaction mixture was stirred at rt for 16 h. The reaction mixture was then transferred into ice water and the resulting precipitate was filtered off, and dried reduced pressure. The crude product was purified using silica gel column chromatography (7% MeOH-DCM) to give methyl (1r,4r)-4-(6-((1,6-naphthyridin-2-yl)amino)-4-(cyclopropylamino)nicotinamido)cyclohexane-1-carboxylate as light a green solid (1.3 g, 49%). LC-MS (ESI+) m/z 460.54 (M+H)+

Statistics shows that 61367-07-5 is playing an increasingly important role. we look forward to future research findings about Methyl trans-4-aminocyclohexanecarboxylate hydrochloride.

Reference:
Patent; Kymera Therapeutics, Inc.; Mainolfi, Nello; Ji, Nan; Kluge, Arthur F.; Weiss, Matthew M.; Zhang, Yi; (1443 pag.)US2019/192668; (2019); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

816-27-3,Some common heterocyclic compound, 816-27-3, name is Ethyl 2-ethoxy-2-iminoacetate, molecular formula is C6H11NO3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 1Ethyl F 1 ,2,4ltriazo loll ,5-alpyridine-2-carboxylate To solution of ethyl 2-ethoxy-2-iminoacete (1.91 g, 13.2 mmol) in ethanol (66.1 mL) was added1,2-diaminopyridinium iodide (2.35 g, 9.91 mmol) followed by potassium hydroxide (556 mg,9.91 mmol) and stirred at r.t. for 16 h. Water was then added, the mixture extracted with EtOAc, the organic layer was separated, and concentrated in vacuo. Purification by chromatography (silica, 60 100 % ethyl acetate in hexanes) gave ethyl [1,2,4]triazolo[1,5-a]pyridine-2- carboxylate (570 mg, 30 %). 1H NMR (400 MHz, CHLOROFORM-d) ppm 8.67 (dt, J=6.9, 1.2Hz, 1 H), 7.86 (dt,J=9.1, 1.2 Hz, 1 H), 7.62 (m, 1 H), 7.17 (td,J=7.0, 1.3 Hz, 1 H), 4.56 (q, J=7.2 Hz, 2 H), 1.48 (t, J=7.1 Hz, 3 H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Ethyl 2-ethoxy-2-iminoacetate, its application will become more common.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BHAGIRATH, Niala; DOMINIQUE, Romyr; KENNEDY-SMITH, Joshua; LUCAS, Matthew C.; PADILLA, Fernando; WO2014/64134; (2014); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics