Tag: M.W=100-200

Related Products of 56741-34-5, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 56741-34-5, name is Methyl 5-amino-2-fluorobenzoate, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: To a solution of compound 11a (154 mg, 1.0 mmol) in anhydrous CH2Cl2 (10 mL) was added 3,5-dichlorobenzoyl chloride (209 mg, 1.0 mmol) and pyridine (241 mL 3.0 mmol) under ice bath. After stirring at room temperature for about 8 h, the solvent was removed in vacuum. The resulting residue was dissolved in NaOH (1 M) water solution (3 mL) and CH3OH (3 mL) and stirred for another 2 h. Then the solvent was removed under vacuum, and the residue was acidied to pH 2 or below with HCl (1 M) water solution. The solution was extracted with ethyl acetate twice and the combined organics were dried over anhydrous sodium sulfate and concentrated in vacuum. The resulting residue was puried by silica gel chromatography to give the desired compound as a white solid (234 mg, yield 85.0%)

The chemical industry reduces the impact on the environment during synthesis Methyl 5-amino-2-fluorobenzoate. I believe this compound will play a more active role in future production and life.

Reference:
Article; Gao, Ding-Ding; Dou, Hui-Xia; Su, Hai-Xia; Zhang, Ming-Ming; Wang, Ting; Liu, Qiu-Feng; Cai, Hai-Yan; Ding, Hai-Peng; Yang, Zhuo; Zhu, Wei-Liang; Xu, Ye-Chun; Wang, He-Yao; Li, Ying-Xia; European Journal of Medicinal Chemistry; vol. 154; (2018); p. 44 – 59;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Some common heterocyclic compound, 4630-80-2, name is Methyl cyclopentanecarboxylate, molecular formula is C7H12O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: Methyl cyclopentanecarboxylate

Example 230 Preparation of 1-(3-Butenyl)cyclopentane Carboxylic Acid Methyl Ester To a solution of diisopropylamine (225 mmol, 31.6 mL) in THF (150 mL) was added dropwise a solution of n-butyl lithium (217.5 mmol, 87 mL, 2.5M) in hexanes at -10 C. while maintaining the temperature below 0 C. After addition, the solution was stirred for 30 min at 0 C. To this, a solution of methyl cyclopentane carboxylate (150 mmol, 19.23 g) in THF (30 mL) was added dropwise at -70 C. maintaining the internal temperature between -60 to -70 C. After addition, the reaction mixture was stirred for 1 h at -50 to -60 C. Then, a solution of 4-bromo-1-butene (142.2 mmol, 19.2 g) in THF (30 mL) was added dropwise and the light brown suspension was stirred for 1 h at -60 to -70 C. Then, it was allowed to warm to room temperature and stirred overnight. The reaction mixture was poured into a saturated solution of ammonium chloride (250 mL) and the mixture was extracted with ether (2*150 mL). The combined extracts were washed with a saturated solution of sodium chloride (150 mL) and dried over anhydrous magnesium sulfate. After filtration of the drying agent, the solution was concentrated under vacuum and the residue was distilled at 63-67 C./2.5 mm Hg to give 13.77 g (53%) of a colorless oil. HR MS (C11H16O2): Obs mass, 182.1311. Calcd mass, 182.1307 (M+).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4630-80-2, its application will become more common.

Reference:
Patent; Hoffmann-La Roche Inc.; US6455550; (2002); B1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 35180-01-9 as follows. Recommanded Product: Chloromethyl isopropyl carbonate

Step 1. Preparation of Iodomethylisopropyl carbonate: Tea solution of anhydrous sodium iodide (6 g, 40 mmol) in anhydrous acetonitrile (20 mL) chloromethyl isopropyl carbonate (2.9 g, 19 mmol) in anhydrous, acetonitrile (10 mL) was added drop wise over 20 min. The reaction mixture, covered with aluminum foil (protected from light) was stirred at room temperature overnight. The solid separated was filtered, washed with acetonitrile and the filtrate was concentrated under reduced pressure. Residue was dissolved in water (10 mL) and organics were extracted in ether (25 mL). Ether extracts were washed with sodium bisulfite (5%, 10 mL), later brine (10 mL). Organic layer was dried over anhydrous, sodium, sulfate, filtered, concentrated and dried under high dried vacuum. Yield 2.72 g (58%); 1H-NMR delta 1.3 (d, 6H), 4.95 (m, 1H), 5.95 (s, 2H).

According to the analysis of related databases, 35180-01-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SPRING BANK PHARMACEUTICALS, INC.; Iyer, Radhakrishnan P.; Coughlin, John Edward; (35 pag.)US2015/329864; (2015); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Reference of 217314-47-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 217314-47-1, name is Methyl 3-amino-5-methoxybenzoate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

(i) Methyl 3-((4-((4-((tert-butoxycarbonvnamino)naphthalen-1-yl)oxy)pyridin-2-yl)amino)-5-methoxybenzoateA flask charged with tert-butyl (4-((2-chloropyridin-4-yl)oxy)naphthalen-1-yl)carbamate (see Example 2(ii) above; 20.1 g, 54.2 mmol), methyl 3-amino-5-methoxybenzoate (10.80 g, 59.6 mmol), BrettPhos G1 Precatalyst (550 mg, 0.689 mmol) and K2C03(14.98 g, 108 mmol) in anhydrous tBuOH (300 ml.) was back filled with nitrogen (x3) and then placed on a heating block (preheated to 90C). The suspension was degassed with nitrogen, stirred for 8 h and then cooled to rt and stirred for 8 h. Reaction mixture was warmed to 50C then cooled to rt and diluted with DCM (1 L), the suspension was filtered through Celite and the solvent evaporated. The brown oil was sonicated with diethyl ether (500 ml.) and the solid filtered under suction, washing with further diethylether, to afford the sub-title compound (21.55 g) as a beige solid. 1H NMR (400 MHz, DMSO-d6) delta 9.37 (s, 1 H), 9.19 (s, 1 H), 8.15 (s, 1 H), 8.13 (s, 1 H), 7.85 (dd, 1 H), 7.76 (dd, 1 H), 7.69 (dd, 1 H), 7.66-7.54 (m, 3H), 7.37 (d, 1 H), 6.96 (dd, 1 H), 6.62 (dd, 1 H), 6.09 (d, 1 H), 3.82 (s, 3H), 3.75 (s, 3H), 1.53 (s, 9H). (90% purity). LCMS m/z 516 (M+H)+(ES+); 514 (M-H)”(ES”)

The synthetic route of Methyl 3-amino-5-methoxybenzoate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; RESPIVERT LIMITED; TOPIVERT PHARMA LIMITED; FYFE, Matthew Colin Thor; THOM, Stephen Malcolm; BAKER, Thomas Matthew; HARBOTTLE, Gareth William; HASIMBEGOVIC, Vedran; RIGBY, Aaron; WO2015/92423; (2015); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 2967-93-3, name is Methyl 2-fluoro-5-methylbenzoate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 2967-93-3, Recommanded Product: 2967-93-3

The 2-fluoro-5-methyl benzoic acid methyl ester (100 mg, 0 . 60mmol), NBS (112 mg, 0 . 63mmol), AIBN (60 mg, 0 . 36mmol) is added in the reaction bottle, by adding CCl4(5 ml), Ar atmosphere reflow 3h, raw material a small amount of residual, reducing pressure and evaporating solvent, adding anhydrous ethyl ether (10 ml), vacuum filtration, filtrate turns on lathe does, column chromatography, to obtain 20 mg of white solid, yield 13.5%.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 2-fluoro-5-methylbenzoate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Institute Of Materia Medica Chinese Academy Of Medical Sciences; Xu, Bailing; Chen, Xiaoguang; Yao, Haiping; Ji, Ming; Jin, Jing; Zhou, Jie; Wang, Ke; Zhao, Dalong; (55 pag.)CN105461697; (2016); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 606-45-1, name is Methyl 2-methoxybenzoate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 606-45-1, category: esters-buliding-blocks

General procedure: Various benzohydrazides 5-7 and 9-13 were obtained accordingto known procedures [40,65] except for benzohydrazides 4and 8 which were commercially available. A solution of the methylbenzoate (1 equiv) in ethanol was added dropwise to 65% hydrazinemonohydrate (5 equiv). The reaction mixture was then heatedunder reflux and stirred overnight. The reaction progress was followedup by TLC. Crude product was collected by filtration aftercooling of the reaction medium and finally washed with coldethanol unless specified otherwise. The desired benzohydrazides were used without any further purification.The analysis of spectral data (1H and 13C NMR), the yields, HRMS,Mp and Rf of these precursors are presented in SupplementaryInformation.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Methyl 2-methoxybenzoate, and friends who are interested can also refer to it.

Reference:
Article; Ameryckx, Alice; Thabault, Leopold; Pochet, Lionel; Leimanis, Serge; Poupaert, Jacques H.; Wouters, Johan; Joris, Bernard; Van Bambeke, Francoise; Frederick, Raphael; European Journal of Medicinal Chemistry; vol. 159; (2018); p. 324 – 338;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

14064-10-9, name is Diethyl 2-chloromalonate, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. HPLC of Formula: C7H11ClO4

Step 3; d3-2-(2-Methoxyphenoxy)propanedioic acid diethyl ester: 2-d3-methoxyphenol (5.9 g, 46 mmol) in ethanol (6 mL) and diethylchloromalonate (11.64 g, 60 mmol) in ethanol (6 mL) were sequentially added to a suspension of sodium methoxide (2.76 g, 51 mmol) in 60 mL of absolute ethanol. Under continuous stirring, the mixture was heated at reflux for about 25 hours, then cooled and maintained at ambient temperature for about 4 days. The reaction mixture was filtered and the filtrate was concentrated. The crude product, a yellow oil, was isolated using standard extractive work up and purified by column chromatography on silica gel to yield 9.1 g of the title compound (69percent yield). 1H NMR (300 MHz, CDCl3) delta 1.31 (t, J=7.2 Hz, 6H), 4.32 (q, J=7.2 Hz, 4H), 5.24 (s, 1H), 6.90 (m, 2H), 7.04 (m, 2H); E1-MS m/z=285 (M+). Step 3 d3-2-(2-Methoxyphenoxy)propanedioic acid diethyl ester: The title compound is made by following the procedure set forth in Example 3, step 3.

The synthetic route of 14064-10-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; AUSPEX PHARMACEUTICALS, INC.; US2008/242687; (2008); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 18595-18-1, name is Methyl 3-amino-4-methylbenzoate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 18595-18-1, Quality Control of Methyl 3-amino-4-methylbenzoate

To a suspension of imidazo[1 ,2-a]pyridine-3-carboxylic acid (1 ) (4.09 g, 25.3 mmol) in dichloromethane (100 mL) and DMF (0.25 mL) at 0 C was added oxalyl chloride (4.15 mL, 48.0 mmol) dropwise over 10 minutes. The reaction was slowly warmed to room temperature and stirred until complete conversion was detected by LCMS. The reaction was subsequently reduced to dryness and suspended in dichloromethane (100 mL) and was added a solution of methyl 3-amino-4-methylbenzoate (2) (4.6 g, 27.9 mmol) in dichloromethane (100 mL) and triethylamine (7.1 mL) . Contents were stirred at room temperature for 4 hours and diluted with dichloromethane (100 mL). The reaction was washed with water, saturated NaHC03, brine, dried over magnesium sulfate, filtered and reduced to dryness. The crude solid was triturated with diethyl ether to remove excess aniline and dried to afford methyl 3-(imidazo[1 ,2-a]pyridine-3-carboxamido)-4- methylbenzoate (3) as a white solid. MS m/z 310.1 (M+1 ) +.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Methyl 3-amino-4-methylbenzoate, and friends who are interested can also refer to it.

Reference:
Patent; IRM LLC; NOVARTIS PHARMACEUTICALS UK LIMITED; LIANG, Fang; GIBNEY, Michael; YEH, Vince; LI, Xiaolin; MOLTENI, Valentina; SHAW, Duncan; BERMAN, Ashley Mitchell; LEWIS, Sarah; LOREN, Jon; FURMINGER, Vikki; WO2013/33620; (2013); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Reference of 13671-00-6, The chemical industry reduces the impact on the environment during synthesis 13671-00-6, name is Methyl 2,6-difluorobenzoate, I believe this compound will play a more active role in future production and life.

General procedure: To a solution of an appropriate methyl esters17(a-j) (1.0 mmol) in 50 mL of methanol was added 99 %hydrazine hydrate (4.0 mmol) and the mixture was refluxedfor 5 h up to reaction completed (TLC). After completionof reaction, it was allowed to cool and the obtained solidwas washed with methanol. The crude products wererecrystallized from ethanol.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 2,6-difluorobenzoate, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Murty; Penthala, Raju; Polepalli, Sowjanya; Jain; Medicinal Chemistry Research; vol. 25; 4; (2016); p. 627 – 643;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 4934-99-0 as follows. category: esters-buliding-blocks

Step 1: methyl 3-(l,3-dioxo-2,3-dihydro-lH-isoindol-2-yI)cyclobutane-l- carboxylate: into a 1000-mL round-bottom flask, was placed a solution of methyl 3- hydroxycyclobutane-l -carboxylate (10 g, 76.88 mmol, 1.00 eq.) in tetrahydrofuran (500 mL), 2,3-dihydro-l H-isoindole-l,3-dione (13.2 g, 89.7 mmol, 1.20 eq.), triphenyl phosphine (23.6 g, 90.0 mmol, 1.20 eq.). This was followed by the addition of DEAD (21 g, 120.6 mmol, 1.50 eq.) dropwise with stirring. The resulting solution was stirred for 3 h at room temperature. The reaction was then quenched by the addition of water. The resulting solution was extracted with 3×100 mL of ethyl acetate and the organic layers combined and dried over anhydrous sodium sulfate and concentrated under vacuum. The residue was applied onto a silica gel column with ethyl acetate/petroleum ether (1 : 1). This resulted in 6 g (30%) of methyl 3-(l ,3-dioxo-2,3- dihydro-l H-isoindol-2-yl)cyclobutane-l -carboxylate as a white solid. NMR (300MHz, CDC ): delta 7.85-7.81 (m, 2H), 7.75-7.70 (m, 2H), 5.09-5.03 (t, J= 8.7 Hz, 1 H), 3.32-3.29 (m, 1 H), 3.18-3.10 (m, 2H), 2.67-2.59 (m, 2H), 1.31 -1.24 (m, 3H). LC-MS: (M+H)+ = 260.

According to the analysis of related databases, 4934-99-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; PROTEOSTASIS THERAPEUTICS, INC.; BASTOS, Cecilia, M.; MUNOZ, Benito; TAIT, Bradley; (96 pag.)WO2016/105468; (2016); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics