Tag: M.W=100-200

Some common heterocyclic compound, 927-68-4, name is 2-Bromoethyl acetate, molecular formula is C4H7BrO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. SDS of cas: 927-68-4

(2-Acetoxy-ethoxyimino)-[4-((1R,3R,7S)-9-bicyclo[3.3.1]non-3-yl-9-aza-bicyclo[3.3.1]non-3-yl)-3-oxo-3,4-dihydro-quinoxalin-2-yl]-acetic acid methyl ester (d26) To a suspension of d25 (331.0 mg, 0.672 mmol) in MeCN-DMF (2:1) (15 mL) was added 2-bromoethyl acetate (0.156 mL, 1.344 mmol) and K2CO3 (279 mg, 2.016 mmol) at a temperature of about 25 C. under a nitrogen atmosphere. The mixture was stirred at a temperature of about 25 C. for 6 hr and 60 C. for 3 hr. The reaction mixture was diluted with water-saturated aqueous NaHCO3 (1:1), then extracted with AcOEt-CHCl3 (4:1) (x2). The combined organic phases were washed with saturated aqueous NaCl, dried (Na2SO4), and concentrated. The resulting yellow amorphous solid was chromatographed (silica-gel 15 g, v/MeOH (10% concentrated NH4OH)=100/0?17/3) to provide 258.2 mg of d26 as a yellow solid. (Yield 66%) d26: 1H-NMR (300 MHz, CDCl3-CD3OD-DCl) delta: 1.28-3.05 (m, 27H), 3.89 (s, 3H), 4.02-4.13 (m, 2H), 4.13-4.25 (m, 1H), 4.26-4.31 (m, 2H), 4.47-4.53 (m, 2H), 6.37-6.54 (m, 1H), 7.39 (t, J=7.53 Hz, 1H), 7.79 (td, J=7.93, 1.37 Hz, 1H), 7.86 (dd, J=7.93, 1.51 Hz, 1H), 8.78 (d, J=8.69 Hz, 1H); LC/MS: m/z=579.4 [M+H]+ (Calc: 578).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 927-68-4, its application will become more common.

Reference:
Patent; Shionogi & Co., Ltd.; Purdue Pharma L.P.; MARRA, Jeffrey Michael; Tsuno, Naoki; Ueno, Tatsuhiko; Zhou, Xiaoming; US2014/187544; (2014); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 64113-91-3, name is tert-Butyl 2-aminobenzoate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 64113-91-3, Product Details of 64113-91-3

To a solution of [4- (PHENYLMETHYL) PHENYL] acetic acid (0.059g, 0. 26MMOL, 1 EQUIV) and DIPEA (0. 054ML, 0. 31MMOL, 1.2equiv) in anhydrous DMF (0. 5MOI) was added a solution of HATU (0.119g, 0. 31MMOL, 1.2equiv) in DMF (0. 5M1), FOLLOWED by 1,1- dimethylethyl 2-aminobenzoate (0.060 g, 0. 31mmol, 1.2equiv) in DMF (0. 5ml). The mixture was stirred under an atmosphere of nitrogen for 72 hr, then concentrated under reduced pressure and partitioned between DCM and 2N HCI. The separated organic phase was washed with saturated sodium bicarbonate then evaporated under a stream of nitrogen and purified by preparative h. p. l. c. to give the title compound (0.033g, 32%) as a white solid ; LC/MS : m/z 402.2 [MH] +.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, tert-Butyl 2-aminobenzoate, and friends who are interested can also refer to it.

Reference:
Patent; SMITHKLINE BEECHAM CORPORATION; WO2005/16870; (2005); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 18595-14-7, name is Methyl 4-amino-3-methylbenzoate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 18595-14-7, Formula: C9H11NO2

An autoclave was charged with a mixture of methyl 4-amino-3-methylbenzoate (10.0 g, 60.5 mmol, Cas No18595-14-7), rhodium 5% on charcoal (3.74 g, 50% wet), acitic acid (5.2 ml)and ethanol (100 ml) and pressurized with hydrogen (12 bar). The mixture was stirred at 80C for 22 h. For work-up, the catalyst was filtrate d off, washed with ethanol and the filtratewas concentrated under reduced pressure. The residue was dissolved in dichloromethane(250 ml) and hydrochloric acid (30 ml, 120 mmol, 4 M in dioxane) was added. The mixturewas concentrated und reduced pressure and the residue was codestilled with toluene (2x) togive the crude product as a mixture of isomers which was used without further purification.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 4-amino-3-methylbenzoate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; EIS, Knut; ACKERMANN, Jens; WAGNER, Sarah; BUCHGRABER, Philipp; SUeLZLE, Detlev; HOLTON, Simon; BENDER, Eckhard; LI, Volkhart; LIU, Ningshu; SIEGEL, Franziska; LIENAU, Philip; BAIRLEIN, Michaela; VON NUSSBAUM, Franz; HERBERT,Simon; KOPPITZ, Marcus; (734 pag.)WO2016/177658; (2016); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

These common heterocyclic compound, 178312-47-5, name is Ethyl 4,4-difluorocyclohexanecarboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 178312-47-5

Step 5 4,4-Difluoro-cyclohexanecarboxylic acid: A solution of 4,4-difluoro-cyclohexanecarboxylic acid ethyl ester (970 mg, 5.0 mmol) in ethanol (5 mL) was treated with 2N sodium hydroxide (3.8 mL, 7.6 mmol) at 0 C., and the mixture was allowed to warm to ambient temperature and stirred for an additional 18 hours. The mixture was diluted with water (15 mL), and the pH was adjusted to 3-4 with 6 N hydrochloric acid. The mixture was extracted with toluene, dried and concentrated to give the title compound as a white solid. Yield: 758 mg (92%). 1H-NMR (CDCl3.) delta: 1.60-2.23 (m, 8H), 2.45 (m, 1H).

The synthetic route of Ethyl 4,4-difluorocyclohexanecarboxylate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Auspex Pharmaceuticals, Inc.; US2008/146605; (2008); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Some common heterocyclic compound, 63485-50-7, name is cis-Methyl 3-hydroxycyclobutanecarboxylate, molecular formula is C6H10O3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 63485-50-7

Triphenylphosphine (0.948 g, 3.61 mmol) was added to a solution of 4-methyl-/V- (quinolin-8-yl)benzenesulfonamide (Intermediate 88A) (1 .08 g, 3.61 mmol) in tetrahydrofuran (30 ml_). The reaction mixture was cooled to 0 C, and methyl 3- hydroxycyclobutanecarboxylate (0.35 ml_, 3.0 mmol) was added, followed by DIAD (0.70 ml_, 3.6 mmol). The reaction mixture was then warmed to room temperature, stirred overnight, and diluted with water and EtOAc. The mixture was partitioned, and the aqueous layer was extracted with EtOAc. The organics were washed with water, dried over sodium sulfate, filtered, and concentrated. The residue was purified on silica gel eluting with a 0%-100% EtOAc- hexanes gradient to give the title compound (0.691 g, 56%). 1H NMR (400 MHz, CD3SOCD3) delta 1 .79-1 .93 (m, 1 H), 2.04 (dt, J = 8, 4 Hz, 1 H), 2.25-2.36 (m, 1 H), 2.36-2.46 (m, 4 H), 2.66- 2.76 (m, 1 H), 3.60 (s, 3 H), 4.97 (t, J = 8 Hz, 1 H), 7.32 (d, J = 8 Hz, 2 H), 7.49-7.59 (m, 4 H), 7.65 (t, J = 8 Hz, 1 H), 8.06 (dd, J = 8, 1 Hz, 1 H), 8.41 (dd, J = 8, 1 Hz, 1 H), 8.71 (dd, J = 4, 2 Hz, 1 H); LC-MS (LC-ES) M+H = 41 1 .

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 63485-50-7, its application will become more common.

Reference:
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY DEVELOPMENT LIMITED; DEATON, David Norman; GUO, Yu; HANCOCK, Ashley Paul; SCHULTE, Christie; SHEARER, Barry George; SMITH, Emilie Despagnet; STEWART, Eugene L.; THOMSON, Stephen Andrew; (556 pag.)WO2018/69863; (2018); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 10601-80-6, name is Ethyl 3,3-diethoxypropionate, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C9H18O4

12.6 g of sodium hydride (purity: 60%, 525.0 mmoles) was washed with diethyl ether by decantation several times and then made into a solution in 500 ml of diethyl ether. Thereto were added, in a nitrogen current at 0 to 10C, 194 g (2.6 moles) of ethyl formate and 50 g (262.0 mmoles) of ethyl 3,3-diethoxy-propionate. The resulting mixture was stirred at room temperature for 15 hours to give rise to a reaction. After confirmation of the completion of the reaction, the reaction mixture was poured into water, followed by washing with diethyl ether. The resulting aqueous layer was allowed to have a pH of 1 with hydrochloric acid, followed by extraction with dichloromethane. The resulting organic layer was washed with an aqueous sodium chloride solution and then dried over anhydrous magnesium sulfate. The resulting solution was subjected to vacuum distillation to remove the solvent contained therein, to obtain 37.6 g (yield: 100%) of crude (ethoxycarbonyl)malondialdehyde as a dark red oily substance. 1H-NMR [CDCl3/TMS, delta (ppm)]: 9.09 (2H,s), 5.26 (1H,s), 4.27 (2H,q), 1.28 (3H,t)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 10601-80-6.

Reference:
Patent; KUMIAI CHEMICAL INDUSTRY CO., LTD.; IHARA CHEMICAL INDUSTRY CO., LTD.; EP1364946; (2003); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Application of 394-35-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 394-35-4 name is Methyl 2-fluorobenzoate, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: Compounds 6a-t were synthesized from substituted benzoic acid via six steps according to the literature method as described. Various substituted benzoic acids 1a-t were treated with SOCl2 to give compounds 2a-t, which were reacted with CH3OH and EtN3 in CH2Cl2 at 0 to afford compounds 3a-t. Compounds 4a-t were prepared by the reaction of compounds 3a-t, hydrazine hydrate in CH3OH under reflux condition about 5h. Subsequently, compounds 5a-t were obtained by reaction of compounds 4a-t with CS2 and KOH in CH3OH. Compounds 6a-t were obtained by the cyclization reaction of compounds 5a-t in the presence of HCl at 0-5°C.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Methyl 2-fluorobenzoate, and friends who are interested can also refer to it.

Reference:
Article; Li, Liangjing; Ding, Hao; Wang, Baogang; Yu, Shichong; Zou, Yan; Chai, Xiaoyun; Wu, Qiuye; Bioorganic and Medicinal Chemistry Letters; vol. 24; 1; (2014); p. 192 – 194;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 394-35-4, name is Methyl 2-fluorobenzoate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Product Details of 394-35-4

A mixture of 20.0 g of methyl 2-fluorobenzoate, 15.2 g of methyl thioglycolate, 21.8 g of potassium carbonate,and 150 ml of N,N-dimethylformamide was stirred for 4 hours at 60°C. After the reaction mixture was cooled to roomtemperature, water was added thereto, and the residue was washed three times with tert-butyl methyl ether. Concentratedhydrochloric acid was added to the aqueous layer, and then extraction was performed three times by using tert-butylmethyl ether. The collected organic layer was washed with water and saturated saline, dried over magnesium sulfate,and then concentrated under reduced pressure. The residues were recrystallized from ethanol and water, therebyobtaining 3.89 g of methyl 3-hydroxybenzo[b]thiophene-2-carboxylate.

The synthetic route of 394-35-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Sumitomo Chemical Company Limited; MUKUMOTO, Fujio; TAMAKI, Hiroaki; KUSAKA, Shintaro; IWAKOSHI, Mitsuhiko; EP2926660; (2015); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

57486-67-6, name is Methyl 2-(2-fluorophenyl)acetate, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. SDS of cas: 57486-67-6

EXAMPLE 4 4-[(R,S)-2-(2-Fluorophenyl),propyl]-1-{(R,S)-2-fluoro-3-[5-(1,2,4-triazol-4-yl)-1H-indol-3-yl]propyl}pipeperazine Methyl 2-fluorophenylacetate (24.2 g, 0.144 mol) in THF (75 ml) was added dropwise over 20 min to a -78 C. solution of LDA (diisopropylamine (16.0 g, 0.158 mol) and n-butyl lithium (2.5 M, 61 ml)) in THF (300 ml) and stirring was continued for 1 h. Methyl iodide (22.5 g, 0.158 mol) was added dropwise over 15 min and the reaction mixture allowed to warm to room temperature over 1 h. The solution was poured into saturated ammonium chloride solution and extracted with diethyl ether. The extract was washed with brine, dried and evaporated to yield methyl 2-(2-fluorophenyl)propanoate (26.2 g, 100%) as an oil.

The synthetic route of 57486-67-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Merck Sharp & Dohme Ltd.; US5977116; (1999); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Some common heterocyclic compound, 25415-67-2, name is Ethyl 4-methylpentanoate, molecular formula is C8H16O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C8H16O2

EXAMPLE 37 (FROM TABLE 1) 5-Bromo-2-oxo-1,2-dihydroindol-3-ylidenemethyl)-2-isopropyl-4-phenyl-1H-pyrrole-3-carboxylic Acid (3-diethylaminopropyl)amide A mixture of 2-aminoacetophenone hydrochloride (1 equiv.), ethyl isobutylacetate (1.2 equiv.) and sodium acetate (2.4 equiv.) in H2O was stirred at 100 C. for 18 hours and then cooled to room temperature. The aqueous layer was decanted off and the oil was dissolved in ethyl acetate. It was then washed with water and brine and then dried to give (93%) of 2-isopropyl-4-phenyl-1H-pyrrole-3-carboxylic acid ethyl ester as a red brown oil. 1H NMR (300 MHz, DMSO-d6) delta 11.21 (s, br, 1H, NH), 7.14-7.27 (m, 5H), 6.70 (d, J=2.7 Hz, 1H), 4.02 (q, J=7.1 Hz, 2H, OCH2CH3), 3.65 (m, 1H, CH(CH3)2), 1.22 (d, J=7.5 Hz, 6H, CH(CH3)2), 1.04 (t, J=7.1 Hz, 3H, OCH2CH3). MS-EI m/z 257 [M+].

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 25415-67-2, its application will become more common.

Reference:
Patent; Sugen, Inc.; US6878733; (2005); B1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics