Zhu, Xiao-Feng et al. published their research in Angewandte Chemie, International Edition in 2022 | CAS: 2253-73-8

Isopropylisothiocyanate (cas: 2253-73-8) belongs to esters. Esters perform as high-grade solvents for a broad array of plastics, plasticizers, resins, and lacquers, and are one of the largest classes of synthetic lubricants on the commercial market. Polyesters are important plastics, with monomers linked by ester moieties. Acyl chlorides and acid anhydrides alcoholysis is another way to produce esters. Acyl chlorides and acid anhydrides react with alcohols to produce esters. Anydrous conditions are recommended since both acyl chlorides and acid anhydrides react with water.Related Products of 2253-73-8

One-Pot Construction of Sulfur-Rich Thermoplastic Elastomers Enabled by Metal-Free Self-Switchable Catalysis and Air-Assisted Coupling was written by Zhu, Xiao-Feng;Yang, Guan-Wen;Xie, Rui;Wu, Guang-Peng. And the article was included in Angewandte Chemie, International Edition in 2022.Related Products of 2253-73-8 The following contents are mentioned in the article:

Construction of well-defined sulfur-rich macromols. in a facile manner is an interesting but challenging topic. Herein, we disclose how to readily construct well-defined triblock sulfur-rich thermoplastic elastomers via a self-switchable isothiocyanate/episulfide copolymerization and air-assisted oxidative coupling strategy. During self-switchable polymerization, alternating copolymerization of isothiocyanate and episulfide occurs initially due to the lower energy barrier for isothiocyanate insertion with respect to successive episulfide ring-opening. After exhaustion of isothiocyanate, ring-opening polymerization of episulfide begins, providing diblock polymers. Subsequent exposure of the reaction to air leads to a transformation of diblock copolymers into triblock thermoplastic elastomers. This protocol can be extended to diverse isothiocyanates and episulfides, allowing fine-tuning of the performance of the produced sulfur-rich thermoplastic elastomers. This study involved multiple reactions and reactants, such as Isopropylisothiocyanate (cas: 2253-73-8Related Products of 2253-73-8).

Isopropylisothiocyanate (cas: 2253-73-8) belongs to esters. Esters perform as high-grade solvents for a broad array of plastics, plasticizers, resins, and lacquers, and are one of the largest classes of synthetic lubricants on the commercial market. Polyesters are important plastics, with monomers linked by ester moieties. Acyl chlorides and acid anhydrides alcoholysis is another way to produce esters. Acyl chlorides and acid anhydrides react with alcohols to produce esters. Anydrous conditions are recommended since both acyl chlorides and acid anhydrides react with water.Related Products of 2253-73-8

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Chaubey, Snehkrishn A. et al. published their research in Chemical Papers in 2020 | CAS: 112-14-1

Octyl acetate (cas: 112-14-1) belongs to esters. Esters are widespread in nature and are widely used in industry. In nature, fats are in general triesters derived from glycerol and fatty acids. Esters are responsible for the aroma of many fruits, including apples, durians, pears, bananas, pineapples, and strawberries. Liquid esters of low volatility serve as softening agents for resins and plastics. Esters also include many industrially important polymers. Polymethyl methacrylate is a glass substitute sold under the names Lucite and Plexiglas; polyethylene terephthalate is used as a film (Mylar) and as textile fibres sold as Terylene, Fortrel, and Dacron.Quality Control of Octyl acetate

Synthesis of task-specific imidazolium ionic liquid as an efficient catalyst in acetylation of alcohols, phenols, and amines was written by Chaubey, Snehkrishn A.;Mishra, Roli. And the article was included in Chemical Papers in 2020.Quality Control of Octyl acetate The following contents are mentioned in the article:

Herein, we report the synthesis of task-specific amino-functionalized imidazolium ionic liquid, acetate1-(2-tert-butoxycarbonylamino-ethyl)-3-methyl-3H-imidazol-1-ium; (Boc-NH-EMIM.OAc), as an efficient catalyst for the acetylation of alcs., phenols, and amines in the presence of acetic anhydride (acetylating reagent). Remarkably, acetic anhydride in the presence of 10 mol% of catalyst (Boc-NH-EMIM.OAc) under solvent-free conditions showed excellent acetylation activity in shorter duration of time. On the basis of this, a general procedure for acetylation of alcs., phenols, and amines has been developed. The ionic liquid (Boc-NH-EMIM.OAc) can be readily recovered and reused successfully up to four consecutive cycles without any significant loss of its catalytic activity. We have been able to show that this acetylating method has many advantages. It gives high yields, takes shorter time, and develops the possibility of benign environmental-friendly process. This study involved multiple reactions and reactants, such as Octyl acetate (cas: 112-14-1Quality Control of Octyl acetate).

Octyl acetate (cas: 112-14-1) belongs to esters. Esters are widespread in nature and are widely used in industry. In nature, fats are in general triesters derived from glycerol and fatty acids. Esters are responsible for the aroma of many fruits, including apples, durians, pears, bananas, pineapples, and strawberries. Liquid esters of low volatility serve as softening agents for resins and plastics. Esters also include many industrially important polymers. Polymethyl methacrylate is a glass substitute sold under the names Lucite and Plexiglas; polyethylene terephthalate is used as a film (Mylar) and as textile fibres sold as Terylene, Fortrel, and Dacron.Quality Control of Octyl acetate

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Majumdar, Partha et al. published their research in International Journal of High Throughput Screening in 2012 | CAS: 763-69-9

Ethyl 3-ethoxypropanoate (cas: 763-69-9) belongs to esters. Esters typically have a pleasant smell; those of low molecular weight are commonly used as fragrances and are found in essential oils and pheromones. Acyl chlorides and acid anhydrides alcoholysis is another way to produce esters. Acyl chlorides and acid anhydrides react with alcohols to produce esters. Anydrous conditions are recommended since both acyl chlorides and acid anhydrides react with water.COA of Formula: C7H14O3

The development of a high-throughput/combinatorial workflow for the study of porous polymer networks was written by Majumdar, Partha;Bahr, James;Crowley, Elizabeth;Kallam, Alekhya;Gubbins, Nathan;Schiele, Kris;Weisz, Michael;Dirk, Shawn M.;Lenhart, Joseph L.;Chisholm, Bret J.. And the article was included in International Journal of High Throughput Screening in 2012.COA of Formula: C7H14O3 The following contents are mentioned in the article:

A high-throughput workflow was developed for the study of porous polymers generated using the process of chem. induced phase separation The workflow includes automated, parallel preparation of liquid blends containing reactive, polymer network-forming precursors and a poragen, as well as a high-throughput poragen extraction process using supercritical CO2. A structure-process-property relationship study was conducted using epoxy-amine cross-linked networks. The exptl. design involved variations in polymer network cross-link d., poragen composition, poragen level, and cure temperature A total of 216 unique compositions were prepared Changes in opacity of the blends as they cured were monitored visually. Morphol. was characterized using a scanning electron microscope on a subset of the 216 samples. The results obtained allowed for the identification of compositional variables and process variables that enabled the production of porous networks. This study involved multiple reactions and reactants, such as Ethyl 3-ethoxypropanoate (cas: 763-69-9COA of Formula: C7H14O3).

Ethyl 3-ethoxypropanoate (cas: 763-69-9) belongs to esters. Esters typically have a pleasant smell; those of low molecular weight are commonly used as fragrances and are found in essential oils and pheromones. Acyl chlorides and acid anhydrides alcoholysis is another way to produce esters. Acyl chlorides and acid anhydrides react with alcohols to produce esters. Anydrous conditions are recommended since both acyl chlorides and acid anhydrides react with water.COA of Formula: C7H14O3

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Demarcq, Benoit et al. published their research in Journal of Agricultural and Food Chemistry in 2021 | CAS: 2198-61-0

Isopentyl hexanoate (cas: 2198-61-0) belongs to esters. Carboxylic acid esters of low molecular weight are colourless, volatile liquids with pleasant odours, slightly soluble in water. Cyclic esters are called lactones, regardless of whether they are derived from an organic or inorganic acid. One example of an organic lactone is γ-valerolactone.Formula: C11H22O2

Characterization of Odor-Active Compounds of Ichang Lemon (Citrus wilsonii Tan.) and Identification of Its Genetic Interspecific Origin by DNA Genotyping was written by Demarcq, Benoit;Cavailles, Margaux;Lambert, Laetitia;Schippa, Christine;Ollitrault, Patrick;Luro, Francois. And the article was included in Journal of Agricultural and Food Chemistry in 2021.Formula: C11H22O2 The following contents are mentioned in the article:

Ichang lemon is a citrus fruit whose rind gives off a delicious and much appreciated fragrance and flavor. The volatile components of the fruit peel of Ichang lemon were investigated by GC-MS and GC-O (AEDA method). Simultaneously, its genetic origin was identified by using diagnostic SNP markers specific to ancestral species and multiallelic SSR and InDel markers. Ichang lemon combines three ancestral genomes (Citrus maxima, Citrus ichangensis, and Citrus reticulata) and may be a pummelo x Yuzu hybrid. Although the major compounds of the Ichang lemon aromatic profile were present in Citrus junos, a few pummelo-specific compounds were also detected, such as indole and nootkatone, in agreement with its maternal lineage. 3-Methyl-3-sulfanylbutyl acetate, reported to occur in passion fruit and brewed coffee, was identified by GC-MS, GC-QTOF-MS, and GC-FTIR for the first time in citrus. This odor-active compound has a sulfurous, tropical fruity, green note. This study involved multiple reactions and reactants, such as Isopentyl hexanoate (cas: 2198-61-0Formula: C11H22O2).

Isopentyl hexanoate (cas: 2198-61-0) belongs to esters. Carboxylic acid esters of low molecular weight are colourless, volatile liquids with pleasant odours, slightly soluble in water. Cyclic esters are called lactones, regardless of whether they are derived from an organic or inorganic acid. One example of an organic lactone is γ-valerolactone.Formula: C11H22O2

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Saad, M. A. et al. published their research in Materials Today: Proceedings in 2021 | CAS: 106-73-0

Methyl heptanoate (cas: 106-73-0) belongs to esters. Esters perform as high-grade solvents for a broad array of plastics, plasticizers, resins, and lacquers, and are one of the largest classes of synthetic lubricants on the commercial market. Cyclic esters are called lactones, regardless of whether they are derived from an organic or inorganic acid. One example of an organic lactone is γ-valerolactone.Recommanded Product: Methyl heptanoate

Synthesis, characterization, and demulsification of water in crude oil emulsion via a corn oil-based demulsifier was written by Saad, M. A.;Abdurahman, N. H.;Yunus, Rosli Mohd. And the article was included in Materials Today: Proceedings in 2021.Recommanded Product: Methyl heptanoate The following contents are mentioned in the article:

Natural product-based materials have gained significant interest in replacing the petroleum-based oil chems. with environmentally friendly materials. A corn oil-based demulsifier has been successfully synthesized by the condensation reaction of corn oil with diethanolamine in the presence of a catalyst applied during separation via a water-in-oil (W/O) emulsion. The demulsifier was characterized by FTIR, GC-MS, and LC-QTOF-MS analyses. The surfactant′s separation efficacy was studied using the Sany-glass test. The results showed that this new product efficiently demulsified the W/O emulsion with 98% separation achieved. The influence of settling time, demulsifier dosage, and temperature on the demulsification efficiency were investigated. The separation efficiency increased with increasing settling time, demulsifier dose and the temperature conditions accelerate the demulsification process. As well, the interfacial tension decreases with increases of the demulsifier dose. This study involved multiple reactions and reactants, such as Methyl heptanoate (cas: 106-73-0Recommanded Product: Methyl heptanoate).

Methyl heptanoate (cas: 106-73-0) belongs to esters. Esters perform as high-grade solvents for a broad array of plastics, plasticizers, resins, and lacquers, and are one of the largest classes of synthetic lubricants on the commercial market. Cyclic esters are called lactones, regardless of whether they are derived from an organic or inorganic acid. One example of an organic lactone is γ-valerolactone.Recommanded Product: Methyl heptanoate

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Lu, Yuyun et al. published their research in Food Science & Nutrition in 2018 | CAS: 106-73-0

Methyl heptanoate (cas: 106-73-0) belongs to esters. Carboxylic acid esters of low molecular weight are colourless, volatile liquids with pleasant odours, slightly soluble in water. Esters contain a carbonyl center, which gives rise to 120° C–C–O and O–C–O angles. Unlike amides, esters are structurally flexible functional groups because rotation about the C–O–C bonds has a low barrier. Their flexibility and low polarity is manifested in their physical properties; they tend to be less rigid (lower melting point) and more volatile (lower boiling point) than the corresponding amides. Computed Properties of C8H16O2

Potential of three probiotic lactobacilli in transforming star fruit juice into functional beverages was written by Lu, Yuyun;Tan, Chin-Wan;Chen, Dai;Liu, Shao-Quan. And the article was included in Food Science & Nutrition in 2018.Computed Properties of C8H16O2 The following contents are mentioned in the article:

The star fruit is popularly cultivated and consumed in Southeast Asia due to its high antioxidant capacity and various nutrients. In this study, three com. probiotic strains (Lactobacillus helveticus L10, Lactobacillus paracasei L26, and Lactobacillus rhamnosus HN001) were evaluated in star fruit juice fermentation and all strains grew well with the final cell counts of around 108 CFU/mL. The star fruit juice fermented by L. rhamnosus produced the highest amount of lactic acid, resulting in a significant lower pH (4.41) than that of L. helveticus (4.76) and L. paracasei (4.71). Most of aldehydes and esters endogenous in star fruit juice decreased to low or undetectable levels, while ketones, alcs., and fatty acids were produced at varying levels that could impart different aroma notes to the beverages. Therefore, the selection of appropriate probiotics can be an alternative way to develop new functional beverages from star fruit juice with specific aroma notes. This study involved multiple reactions and reactants, such as Methyl heptanoate (cas: 106-73-0Computed Properties of C8H16O2).

Methyl heptanoate (cas: 106-73-0) belongs to esters. Carboxylic acid esters of low molecular weight are colourless, volatile liquids with pleasant odours, slightly soluble in water. Esters contain a carbonyl center, which gives rise to 120° C–C–O and O–C–O angles. Unlike amides, esters are structurally flexible functional groups because rotation about the C–O–C bonds has a low barrier. Their flexibility and low polarity is manifested in their physical properties; they tend to be less rigid (lower melting point) and more volatile (lower boiling point) than the corresponding amides. Computed Properties of C8H16O2

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Shim, Jae Ho et al. published their research in Catalysts in 2022 | CAS: 2253-73-8

Isopropylisothiocyanate (cas: 2253-73-8) belongs to esters. Esters are widespread in nature and are widely used in industry. In nature, fats are in general triesters derived from glycerol and fatty acids. Esters are responsible for the aroma of many fruits. Esterification is the general name for a chemical reaction in which two reactants (typically an alcohol and an acid) form an ester as the reaction product. Esters are common in organic chemistry and biological materials.Formula: C4H7NS

Organocatalysis for the Asymmetric Michael Addition of Aldehydes and α,β-Unsaturated Nitroalkenes was written by Shim, Jae Ho;Cheun, Seok Hyun;Kim, Hyeon Soo;Ha, Deok-Chan. And the article was included in Catalysts in 2022.Formula: C4H7NS The following contents are mentioned in the article:

A mirror image of an aldehyde and α,β-unsaturated nitroalkene were reacted in the presence of (R,R)-1,2-diphenylethylenediamine (DPEN). Thiourea were introduced as an organic catalyst and a selective Michael addition reaction were carried out. The primary amine moiety of DPEN reacts with aldehydes to form enamines, which was activated by the hydrogen bond formation between the nitro groups of α,β-unsaturated nitroalkenes and thiourea. Obtained an asym. Michael product by adding 1,4-enamine to an alkene to form a new carbon-carbon bond. As a result, the primary amine of the chiral diamine were converted to an enamine. The reaction proceeded with a relatively high degree of enantioselectivity, which were achieved using double activation via hydrogen bonding of the nitro group and thiourea. Michael products with a high degree of enantioselectivity (97-99% syn ee) and diastereoselectivity (syn/anti = 9/1) were obtained in yields ranging from 94-99% depending on the aldehydes. This study involved multiple reactions and reactants, such as Isopropylisothiocyanate (cas: 2253-73-8Formula: C4H7NS).

Isopropylisothiocyanate (cas: 2253-73-8) belongs to esters. Esters are widespread in nature and are widely used in industry. In nature, fats are in general triesters derived from glycerol and fatty acids. Esters are responsible for the aroma of many fruits. Esterification is the general name for a chemical reaction in which two reactants (typically an alcohol and an acid) form an ester as the reaction product. Esters are common in organic chemistry and biological materials.Formula: C4H7NS

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Shim, Jae Ho et al. published their research in Catalysts in 2022 | CAS: 2253-73-8

Isopropylisothiocyanate (cas: 2253-73-8) belongs to esters. Esters are also usually derived from carboxylic acids. It may also be obtained by reaction of acid anhydride or acid halides with alcohols or by the reaction of salts of carboxylic acids with alkyl halides. Esterification is the general name for a chemical reaction in which two reactants (typically an alcohol and an acid) form an ester as the reaction product. Esters are common in organic chemistry and biological materials.Safety of Isopropylisothiocyanate

Organocatalysis for the Asymmetric Michael Addition of Aldehydes and α,β-Unsaturated Nitroalkenes was written by Shim, Jae Ho;Cheun, Seok Hyun;Kim, Hyeon Soo;Ha, Deok-Chan. And the article was included in Catalysts in 2022.Safety of Isopropylisothiocyanate The following contents are mentioned in the article:

A mirror image of an aldehyde and α,β-unsaturated nitroalkene were reacted in the presence of (R,R)-1,2-diphenylethylenediamine (DPEN). Thiourea were introduced as an organic catalyst and a selective Michael addition reaction were carried out. The primary amine moiety of DPEN reacts with aldehydes to form enamines, which was activated by the hydrogen bond formation between the nitro groups of α,β-unsaturated nitroalkenes and thiourea. Obtained an asym. Michael product by adding 1,4-enamine to an alkene to form a new carbon-carbon bond. As a result, the primary amine of the chiral diamine were converted to an enamine. The reaction proceeded with a relatively high degree of enantioselectivity, which were achieved using double activation via hydrogen bonding of the nitro group and thiourea. Michael products with a high degree of enantioselectivity (97-99% syn ee) and diastereoselectivity (syn/anti = 9/1) were obtained in yields ranging from 94-99% depending on the aldehydes. This study involved multiple reactions and reactants, such as Isopropylisothiocyanate (cas: 2253-73-8Safety of Isopropylisothiocyanate).

Isopropylisothiocyanate (cas: 2253-73-8) belongs to esters. Esters are also usually derived from carboxylic acids. It may also be obtained by reaction of acid anhydride or acid halides with alcohols or by the reaction of salts of carboxylic acids with alkyl halides. Esterification is the general name for a chemical reaction in which two reactants (typically an alcohol and an acid) form an ester as the reaction product. Esters are common in organic chemistry and biological materials.Safety of Isopropylisothiocyanate

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Feberero, Claudia et al. published their research in Journal of Organic Chemistry in 2020 | CAS: 2253-73-8

Isopropylisothiocyanate (cas: 2253-73-8) belongs to esters. Esters perform as high-grade solvents for a broad array of plastics, plasticizers, resins, and lacquers, and are one of the largest classes of synthetic lubricants on the commercial market. Polyesters are important plastics, with monomers linked by ester moieties. Cyclic esters are called lactones, regardless of whether they are derived from an organic or inorganic acid. One example of an organic lactone is γ-valerolactone.Name: Isopropylisothiocyanate

Experimental and Computational Study of the 1,5-O → N Carbamoyl Snieckus-Fries-Type Rearrangement was written by Feberero, Claudia;Sedano, Carlos;Suarez-Pantiga, Samuel;Lopez, Carlos Silva;Sanz, Roberto. And the article was included in Journal of Organic Chemistry in 2020.Name: Isopropylisothiocyanate The following contents are mentioned in the article:

The reactions of o-lithiated O-aryl N,N-diethylcarbamates with different C-N multiple bond electrophiles have been thoroughly studied. A 1,5-O → N carbamoyl shift, a new variation of the anionic Fries-type rearrangement, takes place when nitriles, imines, or alkylcarbodiimides are employed. In these cases, the carbamoyl group plays a dual role as a directing group, building up a variety of functional groups through the 1,5-O → N carbamoyl migration. On the other hand, the use of iso(thio)cyanates and arylcarbodiimides led to non-rearranged o-functionalized O-arylcarbamates. This reactivity was further computationally explored, and the governing factor could be traced back to the relative basicity of the alternative products (migrated vs nonmigrated substrates). This exploration also provided interesting insights about the degree of complexation of the lithium cations onto these substrates. A new access to useful 2-hydroxybenzophenone derivatives has also been developed. This study involved multiple reactions and reactants, such as Isopropylisothiocyanate (cas: 2253-73-8Name: Isopropylisothiocyanate).

Isopropylisothiocyanate (cas: 2253-73-8) belongs to esters. Esters perform as high-grade solvents for a broad array of plastics, plasticizers, resins, and lacquers, and are one of the largest classes of synthetic lubricants on the commercial market. Polyesters are important plastics, with monomers linked by ester moieties. Cyclic esters are called lactones, regardless of whether they are derived from an organic or inorganic acid. One example of an organic lactone is γ-valerolactone.Name: Isopropylisothiocyanate

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Feberero, Claudia et al. published their research in Journal of Organic Chemistry in 2020 | CAS: 2253-73-8

Isopropylisothiocyanate (cas: 2253-73-8) belongs to esters. Esters perform as high-grade solvents for a broad array of plastics, plasticizers, resins, and lacquers, and are one of the largest classes of synthetic lubricants on the commercial market. Many esters have the potential for conformational isomerism, but they tend to adopt an s-cis (or Z) conformation rather than the s-trans (or E) alternative, due to a combination of hyperconjugation and dipole minimization effects. The preference for the Z conformation is influenced by the nature of the substituents and solvent, if present. Lactones with small rings are restricted to the s-trans (i.e. E) conformation due to their cyclic structure.Safety of Isopropylisothiocyanate

Experimental and Computational Study of the 1,5-O → N Carbamoyl Snieckus-Fries-Type Rearrangement was written by Feberero, Claudia;Sedano, Carlos;Suarez-Pantiga, Samuel;Lopez, Carlos Silva;Sanz, Roberto. And the article was included in Journal of Organic Chemistry in 2020.Safety of Isopropylisothiocyanate The following contents are mentioned in the article:

The reactions of o-lithiated O-aryl N,N-diethylcarbamates with different C-N multiple bond electrophiles have been thoroughly studied. A 1,5-O → N carbamoyl shift, a new variation of the anionic Fries-type rearrangement, takes place when nitriles, imines, or alkylcarbodiimides are employed. In these cases, the carbamoyl group plays a dual role as a directing group, building up a variety of functional groups through the 1,5-O → N carbamoyl migration. On the other hand, the use of iso(thio)cyanates and arylcarbodiimides led to non-rearranged o-functionalized O-arylcarbamates. This reactivity was further computationally explored, and the governing factor could be traced back to the relative basicity of the alternative products (migrated vs nonmigrated substrates). This exploration also provided interesting insights about the degree of complexation of the lithium cations onto these substrates. A new access to useful 2-hydroxybenzophenone derivatives has also been developed. This study involved multiple reactions and reactants, such as Isopropylisothiocyanate (cas: 2253-73-8Safety of Isopropylisothiocyanate).

Isopropylisothiocyanate (cas: 2253-73-8) belongs to esters. Esters perform as high-grade solvents for a broad array of plastics, plasticizers, resins, and lacquers, and are one of the largest classes of synthetic lubricants on the commercial market. Many esters have the potential for conformational isomerism, but they tend to adopt an s-cis (or Z) conformation rather than the s-trans (or E) alternative, due to a combination of hyperconjugation and dipole minimization effects. The preference for the Z conformation is influenced by the nature of the substituents and solvent, if present. Lactones with small rings are restricted to the s-trans (i.e. E) conformation due to their cyclic structure.Safety of Isopropylisothiocyanate

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics