Esters-buliding-blocks

These common heterocyclic compound, 62451-84-7, name is Methyl 2-(3-(trifluoromethyl)phenyl)acetate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. SDS of cas: 62451-84-7

EXAMPLE 98; 4-[2-Methoxy-1-(3-trifluoromethyl-phenyl)-ethyl]-piperazine-1-carboxylic acid (7-methoxy-thiazolo[5,4-d]pyrimidin-2-yl)-amide; Step 1: A mixture of (3-trifluoromethyl-phenyl)-acetic acid methyl ester (6.0 g, 25.9 mmol) and N-bromosuccinimide (9.2 g, 51.7 mmol) and a few drops of hydrobromic acid (48% solution) in chloroform (250 mL) was heated under reflux for two days. The reaction mixture was concentrated to dryness, taken up in methylene chloride and loaded onto a column of silica gel. Elution with 5% ethyl acetate/hexanes gave Bromo-(3-trifluoromethyl-phenyl)-acetic acid methyl ester (3.0 g, 39% yield) as colorless oil. The NMR spectrum obtained on the sample is compatible with its structure.

The synthetic route of Methyl 2-(3-(trifluoromethyl)phenyl)acetate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Brinkman, John A.; Cheung, Adrian Wai-Hing; Firooznia, Fariborz; Guertin, Kevin Richard; Marcopulos, Nicholas; Qi, Lida; Racha, Jagdish Kumar; Sarabu, Ramakanth; Tan, Jenny; Tilley, Jefferson Wright; US2007/270433; (2007); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 34846-90-7, name is Methyl 3-methoxyacrylate, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 34846-90-7

EXAMPLE 2 The toluene solution of 3-mercapto-2-butanone from the previous step (613 g of ca. 25 wt percent solution) was placed in a clean, dry reactor along with 15 g of methyl-3-methoxyacrylate. The mixture was warmed to 25¡ã C., stirred vigorously, and treated with solid sodium methoxide (8.5 g, ca. 0.1 equiv.) all at once. The remaining methyl-3-methoxyacrylate (151 g) was added in at a rate to keep the temperature at or below 35¡ã C. (2 h). The resulting mixture was allowed to reach room temperature and stir for 21 h. Concentrated hydrochloric acid (88 g) was added to the mixture over 30 min such that the temperature did not exceed 35¡ã C. The resulting mixture was stirred vigorously for 2 h, then treated with 73 g of water, and stirred for 10 min more. The phases were allowed to separate. After standing for 10 min, the aqueous phase was drained from the reactor, and the upper, product phase was washed with 100 g of 5percent sodium bicarbonate solution. After being stirred for 15 min, the phases were allowed to separate. The lower, aqueous phase was drained from the reactor, and the upper, product phase was transferred to a distilling flask. The toluene was distilled through a 5-plate distillation column at 100 mmHg. After a small fraction containing toluene and other low boiling impurities was collected, the product, 3-carbomethoxy-4,5-dimethylthiophene, was distilled through the column at 50 mmHg.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 34846-90-7.

Reference:
Patent; Monsanto Company; US6037478; (2000); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Related Products of 619-42-1, The chemical industry reduces the impact on the environment during synthesis 619-42-1, name is Methyl 4-bromobenzoate, I believe this compound will play a more active role in future production and life.

Eth nytfime hyisfiane (82.4 g, 0,84 mol) was added dropwise over 10 min under a nitrogen atmosphere to a solution of methyl 4-bromobenzoate (150 g, 0.7 mol), PdC (PPh3)2 (15 g, 0.021 mol) and Cu (13 g, 0.07 mol) in TEA (1.5 L) and the reaction was siirsd at 90 for 30 minutes. Solids were collected by filtration and washed with EtOAc (5 x 500 mL). The filtrate was concentrated under reduced pressure to give a residue, which was distilled under reduced pressure to yield methyl 4-C(trimethylsify) ethynyl) benzoate (INT-12) as an off-white solid (156 g, 96%),

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 4-bromobenzoate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ACHAOGEN, INC.; PATTERSON, Brian D.; LU, Qing; AGGEN, James Bradley; DOZZO, Paola; KASAR, Ramesh Annasaheb; LINSELL, Martin Sheringham; KANE, Timothy Robert; GLIEDT, Micah James; HILDEBRANDT, Darin James; MCENROE, Glenn A.; COHEN, Frederick; WO2013/170165; (2013); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 454-31-9, name is Ethyl 2,2-difluoroacetate, A new synthetic method of this compound is introduced below., Recommanded Product: 454-31-9

Intermediate 6 (53.35 g, 0.22 mol) was stirred in toluene (1500 mL) at 0 C under N2. Potassium tert-butoxide (34.14 g) was added at 0-5 C and 2,2-difluoro-acetic acid ethyl ester (33.01 g, 0.27 mol) was added dropwise at 0-5 C. The RIVI was stirred at RT for 2 h, then washed with 10% H2S04 in water and the OL was dried on MgSO4,filtered and evaporated, yielding intermediate 7 (70.50 g, quantitative).

The synthetic route of 454-31-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; VAN ROOSBROECK, Yves, Emiel, Maria; BUIJNSTERS, Peter, Jacobus, Johannes, Antonius; TRESADERN, Gary; JACOBY, Edgar; OEHLRICH, Daniel; GIJSEN, Henricus, Jacobus, Maria; (67 pag.)WO2018/83103; (2018); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Electric Literature of 5941-55-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 5941-55-9, name is Ethyl (E)-3-Ethoxyacrylate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

To a solution of (E)-ethyl 3-ethoxyacrylate (12.6 g, 87.6 mmol) in 1,4-dioxane (50 mL) and water (50 mL) was added NBS (17.2 g, 96.4 mmol) at 0C. The mixture was stirred for 1 hour at room temperature. Benzothioamide (12.1 g, 87.6 mmol) was added and the mixture was stirred for 1 hour at 80-90C. The reaction mixture was cooled down to room temperature and poured into NH4OH (300 mL, 3% in water) and extracted with ethyl acetate (150 mL x 2), dried over sodium sulfate, concentrated and purified by chromatography (PE:EA =10/1) to give compound 10-la (2.9 g, 14% yield); LCMS (ESI): m/z 234 [M+Hf?.

The synthetic route of Ethyl (E)-3-Ethoxyacrylate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; TUFTS UNIVERSITY; HAYDON, Philip, G.; LEE, Jinbo; (160 pag.)WO2018/58148; (2018); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

61367-07-5, These common heterocyclic compound, 61367-07-5, name is Methyl trans-4-aminocyclohexanecarboxylate hydrochloride, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of methyl 4-aminocyclohexane carboxylate hydrochloride (1.5 g, 7.74 mmol) and 4-fluoro-3-nitrobenzonitrile (1.28 g, 7.74 mmol) in acetonitrile (50 ml) was added N,N-diisopropylethylamine (2.69 ml, 15.49 mmol) at ambient temperature. The resulting reaction mixture was stirred for 18 hours at room temperature. Acetonitrile was removed under reduced pressure and the crude solid was dissolved in dichloromethane and the dichloromethane layer was washed with water, dried over magnesium sulfate, filtered and then concentrated under reduced pressure. The crude solid product was washed with cold methanol and used in the next step without any further purification. Yield 1.8 g.77% MS (ESI) m/z for C15H17N3O4 = 303.12 (calcd) 304.2 ([M + H]+, found)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 61367-07-5.

Reference:
Patent; OSLO UNIVERSITY HOSPITAL HF; FORSCHUNGSVERBUND BERLIN E.V.; UNIVERSITY OF OULU; KRAUSS, Stefan; NAZARE, Marc; ANUMALA, Upendra Rao; LEHTIO, Lari; WAALER, Jo; HOLSWORTH, Dan; WEGERT, Anita; LEENDERS, Ruben Gerardus George; (99 pag.)WO2018/118868; (2018); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

18595-16-9, Name is Methyl 2-amino-5-methylbenzoate, 18595-16-9, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows.

Step 1: To a solution of 2-amino-5-methyl benzoic acid (1.0 mmol) dissolved in 10% MeOH in toluene (2.5 mL) is added dropwise trimethylsilyl-diazomethane (2.0 M in hexanes, 0.75 mL). The reaction mixture is stirred at room temperature for 1 hour and the solvent is removed under reduced pressure. The resulting methyl ester is dissolved in dichloromethane (3.0 mL) and then 4-chlorobenzoyl chloride (1.0 equivalent) and DIEA (1.0 equivalent) is added sequentially. The reaction mixture is stirred for 3 hours and the solvent is evaporated. The yellow residue is diluted with EtOAc, washed with 1 M NaHSO4, brine, dried, filtered and concentrated under reduced pressure to provide 2-(4-chloro-benzoylamino)-5-methyl-benzoic acid methyl ester (compound 11.1) which is used without purification in the next step.

Statistics shows that Methyl 2-amino-5-methylbenzoate is playing an increasingly important role. we look forward to future research findings about 18595-16-9.

Reference:
Patent; Lew, Willard; Baskaran, Subramanian; Oslob, Johan D.; Yoburn, Joshua C.; Zhong, Min; US2006/35908; (2006); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Some common heterocyclic compound, 653-92-9, name is Methyl 2-bromo-4-fluorobenzoate, molecular formula is C8H6BrFO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 653-92-9

To a solution of methyl 2-bromo-4-fluoro-benzoate (90 g, 386.21 mmol, 1 eq) in dimethylsulfoxide (500 mL) was added tert-butyl piperazine-1-carboxylate (111.82 g, 502.07 mmol, 1.3 eq, hydrochloric salt) and N,N-diisopropylethylamine (199.66 g, 1.54 mol, 269 mL, 4 eq). The mixture was heated to 130 C and stirred at 130 C for 36 hours. The mixture was poured into 1.0 L water, and extracted with ethyl acetate (500 mL x 2). The organic layer was washed with water (1000 mL), 0.5 M hydrochloric acid (500 mL), saturated brine (500 mL) and then dried over anhydrous sodium sulfate, filtered and concentrated in vacuum. The residue was triturated with (petroleum ether : ethyl acetate =5:1, 300 mL), the solid was filtered and dried in vacuum. tert-butyl 4-(3-bromo-4-methoxycarbonyl-phenyl)piperazine-1-carboxylate (93 g, 232.92 mmol, 60% yield) was obtained as an off-white solid. LC/MS (ESI) m/z: 422.1 [M+23] +; 1H-NMR (400MHz, DMSO-d6) d 7.73 (d, J=8.8 Hz, 1H), 7.18 (d, J=2.4 Hz, 1H), 6.98 (dd, J=8.8, 2.4 Hz, 1H), 3.77 (s, 3H), 3.45-3.42 (m, 4H), 3.34-3.31 (m, 4H), 1.42 (s, 9H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 653-92-9, its application will become more common.

Reference:
Patent; ARVINAS OPERATIONS, INC.; YALE UNIVERSITY; CREW, Andrew P.; HORNBERGER, Keith R.; WANG, Jing; CREWS, Craig M.; JAIME-FIGUEROA, Saul; DONG, Hanqing; QIAN, Yimin; ZIMMERMAN, Kurt; (1451 pag.)WO2020/51564; (2020); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

10203-58-4, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 10203-58-4, name is Diethyl isobutylmalonate, This compound has unique chemical properties. The synthetic route is as follows.

2-aminotetrahydropyrrolidine hydrochloride (1.33 g, 10 mmoL) was dissolved in 60 mL of anhydrous ethanol, and 1.33 mL of triethylamine was added dropwise with constant stirring, and the reaction was carried out for 10 min at room temperature.A solution of sodium ethoxide (1.36 g, 20 mmoL) in absolute ethanol (20 mL) was added dropwise on an ice bath and allowed to react for 45 min at room temperature after the addition was complete.A solution of diethyl isobutyl malonate (2.16 g, 10 mmoL) in absolute ethanol (20 mL) was added dropwise with constant stirring, and the temperature was raised and refluxed for 15 hours.After TLC tracking, after the reaction was completed, the mixture was filtered by suction and the filtrate was collected. The filtrate was evaporated and the solvent was removed to give a yellow solid.100 mL of water was dissolved and 100 mL of ethyl acetate was extracted three times. Fat-soluble impurities were removed and the aqueous phases were combined.Butanol was extracted and the n-butanol layer was collected, rotary evaporated and the solvent removed to give a pale yellow solid.The trichloromethane was dissolved, suction filtered to remove impurities that were insoluble in chloroform, and the filtrate was collected and spin-dryed to give a white solid as the compound 3-isobutyl-tetrahydropyrrole [1,2-a]pyrimidine-2, 4(1H,3H)-dione.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Xi’an Jiaotong University; Guo Zengjun; Li Dandan; Zhang Jie; Zhang Hui; Liu Xia; Li Mengyi; Xi Ke; (13 pag.)CN104693205; (2017); B;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

10601-80-6, The chemical industry reduces the impact on the environment during synthesis 10601-80-6, name is Ethyl 3,3-diethoxypropionate, I believe this compound will play a more active role in future production and life.

General procedure: 2-aminopyridine 1a (47 mg, 0.5 mmol), ethyl 3,3-diethoxypropanoate 2 (285 mg, 1.5 mmol) and p-TsOH (8.6 mg, 10 mol %) were stirred in 2 mL of toluene for 6 h at 80 C. After completion of the reaction (monitored by TLC), the water (10 mL) was added. The aqueous solution was extracted with ethyl acetate (3¡Á8 mL) and the combined extract was dried with anhydrous MgSO4. The solvent was removed and the crude product was separated by column chromatography (eluted with petroleum ether/ethyl acetate = 2:1) to give a pure sample of 3a (Yellow crystal, 100 mg, 82%).

The chemical industry reduces the impact on the environment during synthesis Ethyl 3,3-diethoxypropionate. I believe this compound will play a more active role in future production and life.

Reference:
Article; Liu, Wenjie; Wang, Shaohua; Zhan, Haiying; Li, Mingshan; Synlett; vol. 25; 10; (2014); p. 1478 – 1481;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics