Esters-buliding-blocks

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 37466-90-3, name is Ethyl 3,4-diaminobenzoate, This compound has unique chemical properties. The synthetic route is as follows., 37466-90-3

General procedure: Ethyl-3-amino-4-(2-substituted amino)benzoate, 3 (1 mmol) and various sodium bisulfite adducts, 4 (1.5 mmol) were dissolved in DMF (5 mL). The reaction mixture was stirred at 90 C under N2 atmosphere for 24-48 h. After completion of reaction (evident by TLC), the reaction mixture was diluted in ethyl acetate (25 mL) and washed with water (10 mL¡Á3). The organic layer was collected, dried over Na2SO4 and evaporated under reduced pressure to afford crude products. Final compounds 5-7 were obtained in 38-90% yields after recrystallization from ethanol or column purification.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Yoon, Yeong Keng; Ali, Mohamed Ashraf; Wei, Ang Chee; Choon, Tan Soo; Ismail, Rusli; European Journal of Medicinal Chemistry; vol. 93; (2015); p. 614 – 624;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

13831-03-3, A common heterocyclic compound, 13831-03-3, name is tert-Butyl propiolate, molecular formula is C7H10O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A dry, argon-filled Schlenk tube with a magnetic stirrer bar and septum is initially charged with tert-butyl prop-2-ynoate (70 mg, 0.56 mmol) in anhydrous THF (2 ml). After adding (TMP)2Zn.MgCl2 (2.2 ml, 1.2 mmol) at 25C, the mixture is stirred for 30 min, then a solution of l -fluoro-3-iodobenzene (160 mg, 0.72 mmol), tetrakis(triphenylphosphine)palladium(0) (33 mg, 5 mol%>) in anhydrous THF (2 ml) is added dropwise and the mixture is stirred at 25C overnight. For workup, the mixture is diluted with aqueous sat. NH4CI solution (30 ml) and extracted with ethyl acetate (3 x 30 ml). After the combined organic phases have been dried over Na2S04, the solvent has been distilled off and purification has been effected by column chromatography on silica gel (heptane : ethyl acetate), the desired compound (91 mg, 75% of theory) was obtained as a colourless oil. ? NMR (400 MHz, CDC13): delta in ppm = 7.34 (m, 2H), 7.26 (m, 1H), 7.13 (m, 1H), 1.53 (s, 9H) Preparation of ethyl 4-(2-chloro-

The synthetic route of 13831-03-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BAYER INTELLECTUAL PROPERTY GMBH; BAYER CROPSCIENCE AG; FORD, Mark, James; MOSRIN, Marc; WO2013/120911; (2013); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

3469-00-9, name is Methyl Diphenylacetate, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. 3469-00-9

General procedure: 4.2 General procedures: A. Microwave. Neat samples of amine (1.00 mmol) and carboxylic derivative (methyl ester or acid, 1.00 mmol) and DABAL-Me3 (202 mg, 0.8 equiv) were placed in a 5 mL microwave vial and dry THF added (1 mL) under a blanket of argon. For coupling partners containing acidic hydrogens additional DABAL-Me3 (total of 410 mg, 1.6 equiv) was used. The vial was promptly capped and placed in a CEM Discover microwave reactor. After irradiation (290 W, 130 C, 8 min) and programmed cool down (ca. 20 min). The reactions were quenched by cautious addition of HCl (2 M, 4 mL) or aqueous solutions of Rochelle salt (saturated potassium sodium tartrate, 4 mL) (CARE: methane liberated). Extraction with dichloromethane, drying (MgSO4) and evaporation frequently provided the pure products directly. If purification was required column chromatography 3:2 to 2:3 hexane:EtOAc was used for amides lacking highly polar functional groups (CH2Cl2 with 2 % v/v MeOH was used for amides bearing pendant amines, alcohols and other polar functional groups).

Statistics shows that 3469-00-9 is playing an increasingly important role. we look forward to future research findings about Methyl Diphenylacetate.

Reference:
Article; Dubois, Nathalie; Glynn, Daniel; McInally, Thomas; Rhodes, Barrie; Woodward, Simon; Irvine, Derek J.; Dodds, Chris; Tetrahedron; vol. 69; 46; (2013); p. 9890 – 9897;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

344-14-9, The chemical industry reduces the impact on the environment during synthesis 344-14-9, name is Dimethyl 2-fluoromalonate, I believe this compound will play a more active role in future production and life.

General procedure: [Pd(C3H5)Cl]2 (0.004 mmol, 4 mol%), [6-(allyloxymethyl)-N-(2-((R)-((S)-1-(3,5-dimethoxyphenyl)propyl)sulfinyl)phenyl)picoli-namide] (6b, 0.008 mmol, 8 mol%), and (E)-1,3-disubstituted allyl acetates 7 (0.1 mmol) were dissolved in THF (2.0 mL) in a dry Schlenk tube filled with argon. The reaction mixture was stirred for 30 min at room temperature. Then Cs2CO3 (3.0 equiv) and dimethyl 2-fluoromalonate 8 (0.3 mmol, 3.0 equiv) were added. After the completion of the reaction monitoring by TLC, the crude reaction mixture was filtrated with celite and the solvent was removed under reduced pressure. The crude residue was purified by flash column chromatography (petroleum ether/ethyl acetate) to give the desired products 9.

The chemical industry reduces the impact on the environment during synthesis Dimethyl 2-fluoromalonate. I believe this compound will play a more active role in future production and life.

Reference:
Article; Zhang, Min; Zhao, Mingzhu; Zheng, Purui; Zhang, Hongbo; Zhao, Xiaoming; Journal of Fluorine Chemistry; vol. 189; (2016); p. 13 – 21;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

24398-88-7, These common heterocyclic compound, 24398-88-7, name is Ethyl 3-bromobenzoate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of copper powder (63.5 mg, 1.00 mmol), the aryl halide (500 mumol), 2-aminoethanol (74.9 muL, 1.25 mmol), and TMSN3 (133 muL, 1.00 mmol) in DMA (1 mL) in a 15 mL test tube was stirred under an Ar atmosphere (balloon) at 95 C using a Chemistation personal organic synthesizer (EYELA, Tokyo). After complete consumption of the aryl halide was confirmed by TLC analyses or after 24 h (if the reaction was incomplete within 24 h), the mixture was diluted with EtOAc (10 mL) and then filtered through a Celite pad. The pad was successively washed with EtOAc (20 mL), H2O (25 mL), and concd aq ammonia solution (5 mL). After the two layers were separated, the aqueous layer was extracted with EtOAc (2¡Á10 mL). The combined organic layers were washed with brine (20 mL), dried over MgSO4, filtered, and concentrated under reduced pressure. The residue was purified by silica-gel column chromatography with n-hexane/EtOAc or n-pentane/Et2O as the eluent.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 24398-88-7.

Reference:
Article; Maejima, Toshihide; Shimoda, Yutaka; Nozaki, Kei; Mori, Shigeki; Sawama, Yoshinari; Monguchi, Yasunari; Sajiki, Hironao; Tetrahedron; vol. 68; 6; (2012); p. 1712 – 1722;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 653-92-9, name is Methyl 2-bromo-4-fluorobenzoate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 653-92-9, 653-92-9

General procedure: A sealed tube of 25 mL equipped with a magnetic stir bar was charged with alkynes (0.20 mmol), 2-bromobenzoic esters (0.22 mmol), CuI (0.02 mmol, 10 mol%), NaOH (0.4 mmol, 2 equiv) and CH3CN (1.0 mL). The reaction mixture was stirred at 100 C for 24 h. The reaction was monitored by GC or GC-MS. After completion of the reaction, the reaction mixture was cooled to room temperature, then washed with saturated NH4Cl aqueous solution (5.0 mL), and extracted with CHCl3 (3 * 5.0 mL). The combined organic phases were dried over Na2SO4 (anhydrous), concentrated in vacuum. The crude product was purified by flash column chromatography (eluent: ethyl acetate/petroleum ether = 1/20-1/10) on silica gel to afford the desired product.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 2-bromo-4-fluorobenzoate, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Sun, Mengli; Su, Lebin; Dong, Jianyu; Liu, Long; Zhou, Yongbo; Yin, Shuang-Feng; Tetrahedron Letters; vol. 58; 25; (2017); p. 2433 – 2437;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

61367-07-5, Name is Methyl trans-4-aminocyclohexanecarboxylate hydrochloride, 61367-07-5, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows.

(1) To a solution of methyl trans-4-aminocyclohexanecarboxylate hydrochloride (1.0 g) obtained in Reference Example 2(1), triethylamine (1.1 ml), 30 % aqueous 3-hydroxypropionic acid solution (1.86 ml) in N,N-dimethylformamide (15 ml) are added 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (1.19 g) and 1-hydroxybenzotriazole (837 mg) under ice-cooling. The mixture is then stirred at room temperature for 20 hours. The reaction solution is concentrated and saturated aqueous sodium hydrogen carbonate solution is poured to the residue, followed by extraction with chloroform. The organic layer is dried over sodium sulfate and evaporated to remove the solvent. The resulting residue is purified by silica gel column chromatography (eluent : ethyl acetate)to give methyl trans-4-[(3-hydroxypropanoyl)amino]cyclohexanecarboxylate (534 mg). APCI-MS M/Z : 230[M+H]+.

Statistics shows that Methyl trans-4-aminocyclohexanecarboxylate hydrochloride is playing an increasingly important role. we look forward to future research findings about 61367-07-5.

Reference:
Patent; TANABE SEIYAKU CO., LTD.; EP1582521; (2005); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 344-14-9, name is Dimethyl 2-fluoromalonate, This compound has unique chemical properties. The synthetic route is as follows., 344-14-9

General procedure: A test tube chargedwith MS 3A (40.0 mg, 200 mg/mmol) was flame-dried under reduced pressure using a heat gun. After cooling to room temperature, argon was re-filled, Schiff base 1 (11.1 mg, 0.02 mmol), THF (0.2 mL) andGd(OiPr)3 (0.2 M THF solution, 0.1 mL, 0.02 mmol) were added. The mixture was stirred at roomtemperature for 30 min to afford yellow suspension. THF was, then, removed under reduced pressure. Tothe test tube were added Y(OTf)3 (10.7 mg, 0.02 mmol) and THF (0.20 mL), and the mixture was stirred at room temperature for 30 min to afford the Gd(OiPr)3/Y(OTf)3/Schiff base = 1:1:1 catalyst in THF.Then, DMAP (2.4 mg, 0.02 mmol) was added, and THF was removed under reduced pressure. After drying the residue under reduced pressure for 1 h at room temperature, toluene (0.2 mL) and Et2O (0.4mL) were added. To the resulting red suspension were added 2-fluoromalonate 3 (0.35 mmol, 1.7 equiv)and meso-aziridine 2 (0.20 mmol, 1.0 equiv), and the mixture was stirred for 17-72 h at 40 C. After themixture was cooled to room temperature and diluted with AcOEt, saturated EDTA?2Na aq. was added.The organic layer was separated, and the aqueous layer was extracted with AcOEt and the organic layers were washed with brine. The organic layers were dried over Na2SO4. After filtration and evaporation, the obtained crude mixture was purified by silica gel column chromatography (AcOEt/hexane/CH2Cl2) togive a corresponding product.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Fukagawa, Seiya; Xu, Yingjie; Anada, Masahiro; Yoshino, Tatsuhiko; Matsunaga, Shigeki; Heterocycles; vol. 94; 7; (2017); p. 1337 – 1350;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding some certain compound to certain chemical reactions, such as: 1190-39-2, name is malonic acid dibutyl ester, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1190-39-2. 1190-39-2

General procedure: PhIO (550 mg, 2.5 mmol), Et3N¡¤5HF (800 mg, 4 mmol), and DCE (1 mL)were placed in a Teflon test tube. After stirring at r.t. for 15 min, the appropriate malonic ester 1 (1 mmol) and DCE (1 mL) were added. The test tube was sealed with a septum rubber and heated at 70 C for 24 h with stirring. The reaction mixture was neutralized with aq NaHCO3 and the product was extracted with CH2Cl2 (3 ¡Á 10 mL). The combined organic layers were washed with brine (20 mL), dried (Na2SO4), and concentrated under reduced pressure. The product was purified by column chromatography on silica gel with hexane-CH2Cl2 as eluent.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of malonic acid dibutyl ester.

Reference:
Article; Kitamura, Tsugio; Muta, Kensuke; Oyamada, Juzo; Synthesis; vol. 47; 20; (2015); p. 3241 – 3245;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

609-12-1, name is Ethyl 2-bromo-3-methylbutanoate, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. 609-12-1

Into a 100-mL round-bottom flask, was placed 4-(tetramethyl-1,3,2-dioxaborolan-2-yl)-1H-pyrazole (1.9 g, 10.0 mmol, 1.00 equiv), N,N-dimethylformamide (30 mL), ethyl 2-bromo-3-methylbutanoate (2.1 g, 10.0 mmol, 1.0 equiv), and cesium carbonate (10.0 g, 30.7 mmol, 3.0 equiv). The resulting solution was stirred for 12 hours at 90 C. The reaction was then quenched by the addition of 10 mL of water. The resulting solution was extracted with ethyl acetate (20 mL*3), and the organic layers combined and concentrated under vacuum. The residue was applied onto a silica gel column eluting with ethyl acetate/petroleum ether (1:6). This resulted in 3.3 g (93%) of ethyl 3-methyl-2-[4-(tetramethyl-1,3,2-dioxaborolan-2-yl)-1H-pyrazol-1-yl]butanoate as a white solid.

Statistics shows that 609-12-1 is playing an increasingly important role. we look forward to future research findings about Ethyl 2-bromo-3-methylbutanoate.

Reference:
Patent; Arvinas Operations, Inc.; Genentech, Inc.; Crew, Andrew P.; Wang, Jing; Berlin, Michael; Dragovich, Peter; Chen, Huifen; Staben, Leanna; US2019/300521; (2019); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics