Esters-buliding-blocks

Electric Literature of 150529-73-0, A common heterocyclic compound, 150529-73-0, name is Methyl 2-(3-bromophenyl)acetate, molecular formula is C9H9BrO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

step 1-To a solution of 216a (1.19 g, 5 mmol) in CCl4 (30 mL) was added NBS (1.08 g, 6 mmol) followed by benzoyl peroxide (catalytic quantity). The mixture was heated at 80 C. overnight. Then the mixture was cooled, filtered and the solid washed with hexane. The combined filtrates were concentrated in vacuo to afford 1.58 g (100%) of 216b as yellow oil.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Roche Palo Alto LLC; US2008/146595; (2008); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Synthetic Route of 685892-23-3, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 685892-23-3 as follows.

Step 1. Preparation of methyl 2-chloro-6-cyclobutylbenzoate (i-llb).A mixture of methyl 2-bromo-6-chlorobenzoate (i-ha) (750 mg, 3 mmol), (PPh3)4Pd (345 mg, 0.3 mmol) and cyclobutylzinc bromide (12 ml in THF, 6 mmol) were mixed under N2 protection. The mixture was stirred at 70C for 12 h under N2. The mixture was extracted with EtOAc and water. The organic phase was washed with brine, dried over Na2SO4, filtered, concentrated, and purified with chromatography (PE: EtOAc = 50:1) to give 350 mg (61% inLCMS, contained some PPh3) of the title compound. LCMS (ESI) calc?d for C12H13C102 [M+H]: 225, found: 225.

According to the analysis of related databases, 685892-23-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; MERCK SHARP & DOHME CORP.; BARR, Kenneth Jay; MACLEAN, John; ZHANG, Hongjun; BERESIS, Richard Thomas; WO2014/28600; (2014); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Related Products of 2901-13-5, These common heterocyclic compound, 2901-13-5, name is Ethyl 2-methyl-2-phenylpropanoate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 2: Synthesis of 2-(4-(chloroacetyl)phenyl)-2-methylpropionic acid ethyl esterIn a 5L reaction flask, add 2,2-dimethylphenylacetic acid ethyl ester (542g, 2.8mol), 2L dichloromethane solution. Stir. Add anhydrous aluminum chloride (600g, 4.5mol), then add dropwise a chloroacetyl chloride (318.6g,2.8mol) in 500mL of methylene chloride mixture. After reacting for a period,detection by TLC finish the reaction was stopped, the organic layer was separated, and the organic layer washed with water, saturated sodium bicarbonate solution , washed with saturated sodium chloride solution, dried and concentrated to give 2-(4-(chloroacetyl)phenyl)-2-methylpropionic acid ethyl ester (660g, 87%).

The synthetic route of 2901-13-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Nanjing Huawe Medicine Technology Development Co., Ltd.; Xu, Feng; Hu, Dandan; Huang, Hui; Jiang, Yuwei; Zhang, Xiaoqing; (6 pag.)CN104276952; (2016); B;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 2005-10-9, name is 6H-Benzo[c]chromen-6-one, A new synthetic method of this compound is introduced below., Formula: C13H8O2

Magnesium (0.190 g, 7.50 mmol) was placed into an oven-dried round bottom flask and flushed with Ar for 30 min while stirring. 4-Bromobiphenyl 5 (1.75 g, 7.50 mmol), anhydrous THF (10 mL), and a crystal of I2 were then added and the reaction stirred for 1.5 h under Ar. During this time 6H-benzo[c]chromen-6-one 9 (0.981 g, 5.00 mmol) was dissolved in 10 mL of anhydrous THF in a separate oven dried round bottom flask. The flask was cooled to 0 C with an ice bath and sparged for 30 min with Ar. The arylmagnesium bromide solution was transferred to the solution containing 9 at 0 Cvia cannula under Ar pressure. The cooling bath was removed, and the reaction was stirred for 18 h. 50 mL of sat. NH4Cl was added to the reaction and subsequently extracted 3x with 25 mL of Et2O. The combined organics were dried with Na2SO4, filtered, and concentrated under reduced pressure. The crude product was dissolved in25 mL of diethyl ether and cooled to 0 C in an ice bath and stirred very rapidly. A chilled (0 C) solution of 70% perchloric acid in acetic anhydride (1:3 by volume) was slowly added drop-wise to the stirring ethereal solution until a colored precipitate formed. The crude product was filtered and recrystallized in glacial acetic acid to yield orange-yellow needles (1.36 g, 63%). mp 234e236 C. 1H NMR(400 MHz, CDCl3/CF3CO2D): d 8.93 (d, J 8.3 Hz, 1H), 8.87 (d,J 8.3 Hz, 1H), 8.79 (d, J 8.3 Hz, 1H), 8.61 (t, J 8.3 Hz, 1H), 8.36(d, J 8.5 Hz, 2H), 8.29 (d, J 8.5 Hz, 1H), 8.20-8.04 (m, 5H), 7.80-7.77 (m, 2H), 7.61-7.52 (m, 3H). 13C NMR (100 MHz, CDCl3/CF3CO2D): d 183.8, 151.5, 150.0, 143.9, 139.6, 138.1, 136.2, 134.6,134.2, 132.0, 130.8, 129.8, 129.4, 128.6, 127.9, 127.6, 123.1, 123.9,121.5, 120.6, 119.9. IR (ATR) nmax: 1597, 1542, 1069 cm1. HRMS (ESI)m/z calcd for C25H17O [M] 333.1279, found 333.1276.

The synthetic route of 2005-10-9 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Meyer, Samantha M.; Charlesworth-Seiler, Eva M.; Patrow, Joel G.; Kitzrow, Jonathan P.; Gerlach, Deidra L.; Reinheimer, Eric W.; Dahl, Bart J.; Tetrahedron; vol. 76; 23; (2020);,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 61644-18-6, name is Chloromethyl isobutyrate, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of Chloromethyl isobutyrate

Example 2 Preparation of 2-((3S,7R,8R,9S)-8-(isobutyryloxy)-3-(3-(isobutyryloxymethoxy)-4-methoxypicolinamido)-9-methyl-2,6-dioxo-1,5-dioxonan-7-yl)ethyl benzoate (Compound 19) To a mixture of 2-((3S,7R,8R,9S)-3-(3-hydroxy-4-methoxypicolinamido)-8-(isobutyryloxy)-9-methyl-2,6-dioxo-1,5-dioxonan-7-yl)ethyl benzoate (50 mg, 0.087 mmol), Na2CO3 (15 mg, 0.14 mmol) and NaI (3.09 mg, 0.021 mmol) in acetone (0.6 mL) was added chloromethyl isobutyrate (15.4 mg, 0.114 mmol) slowly at room temperature (about 22 C.). The resulting reaction mixture was warmed to 50 C. and stirred at 50 C. overnight. The solvent was evaporated and the crude residue was purified via flash chromatography (SiO2, hexanes/EtOAc gradient) to afford the title compound (35 mg, 76%) as an off-white solid: mp 48-50 C.; 1H NMR (300 MHz, CDCl3) delta 8.55 (d, J=7.9 Hz, 1H), 8.26 (d, J=5.5 Hz, 1H), 8.04-7.87 (m, 2H), 7.55 (t, J=7.4 Hz, 1H), 7.43 (t, J=7.5 Hz, 2H), 6.95 (d, J=5.4 Hz, 1H), 5.85-5.62 (m, 2H), 5.41 (s, 1H), 5.26-5.06 (m, 2H), 4.94 (dd, J=9.8, 6.3 Hz, 1H), 4.42-4.19 (m, 2H), 3.92 (d, J=14.3 Hz, 3H), 3.65 (s, 1H), 2.76 (t, J=9.5 Hz, 1H), 2.62 (dt, J=10.8, 5.5 Hz, 1H), 2.58-2.47 (m, 1H), 2.30 (s, 1H), 1.82 (s, 1H), 1.29 (d, J=6.3 Hz, 3H), 1.21 (dd, J=7.0, 0.9 Hz, 6H), 1.13 (d, J=7.0 Hz, 6H); ESIMS m/z 673 ([M+H]+).

According to the analysis of related databases, 61644-18-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Dow AgroSciences LLC; Meyer, Kevin G.; Li, Fangzheng; Renga, James M.; Owen, W. John; Nugent, Benjamin M.; Yao, Chenglin; Wang, Nick X.; US2013/296371; (2013); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Some common heterocyclic compound, 349-43-9, name is Ethyl 2-fluoropropionate, molecular formula is C5H9FO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 349-43-9

Syntheses of the Intermediate Sulfinamide Esters A3.3 and A3.4In a dry apparatus under an inert atmosphere a solution of diisopropylamine (3.35 g, 101 mmol) in tetrahydrofuran (25 ml) was treated with n-butyl lithium (1.6M in hexane, 20.7 ml). The solution was stirred at -7¡ã C. for 40 minutes. Thereafter, the solution was cooled to -75¡ã C. and a solution of ethyl 2-fluoropropanoate (3.98 g, 33.2 mmol) in tetrahydrofuran (5 ml) was added dropwise. After 40 minutes a solution of chlorotitanium triisopropoxide (8.64 g, 33.2 mmol) in tetrahydrofuran (15 ml) was slowly added dropwise. After 40 minutes at -72¡ã C. to the orange colored solution was added dropwise a solution of (R)-2-methyl-propane-2-sulfinic acid [1-(2-fluorophenyl)-(E)-ethylidene]-amide (intermediate A2.1) (4.0 g, 16.6 mmol) in tetrahydrofuran (5 ml). Stiffing was continued at -72¡ã C. for 4 hours, then the reaction mixture was kept at -20¡ã C. for 17 hours. For the workup, the reaction mixture was quenched with an aqueous solution of ammonium chloride (13percent, 100 ml). The precipitate formed was diluted with water and the resulting mixture extracted three times with ethyl acetate. The organic layers were washed with brine, then combined, dried and evaporated at reduced pressure. Purification of the crude product by chromatography on silica gel using a 5:2-mixture auf heptane and ethyl acetate as the eluent yielded a 1:2-mixture of the (2S,3R)-2-fluoro-3-(2-fluoro-phenyl)-2-methyl-3-((R)-2-methyl-propane-2-sulfinylamino)-butyric acid ethyl ester (A3.3) and (2R,3R)-2-Fluoro-3-(2-fluoro-phenyl)-2-methyl-3-((R)-2-methyl-propane-2-sulfinylamino)-butyric acid ethyl ester (A3.4) (4.43 g, 74percent) as a light yellow oil. MS (ISP): m/z=362.2 [M+H]+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 349-43-9, its application will become more common.

Reference:
Patent; Hilpert, Hans; Wostl, Wolfgang; US2012/258962; (2012); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding some certain compound to certain chemical reactions, such as: 46004-37-9, name is Methyl 4-amino-2-chlorobenzoate, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 46004-37-9. 46004-37-9

To a suspension of methyl 4-amino-2-chlorobenzoate (55.8 mmol) in EtOH (558 mL) was added silver sulfate (55.8 mmol) and iodine (58.6 mmol) under argon. The mixture was stirred for 15 min, filtered and the filtrate was concentrated in vacuo. The residue was partitioned between DCM and a 1 M aq. solution of NaOH. The organic phase was washed with a 1 M aq. solution of NaOH, dried over MgS04 and concentrated in vacuo. The crude was purified by CC (SNAP KP-SIL from Biotage) using Hept/EtOAc/MeOH from 89/11/1 to 81/19/1 to give the mixture of regioisomers as salmon solid. The mixture was enriched from 59 to 66% in methyl 4-amino-2-chloro-3-iodobenzoate by recrystallisation in Hept/EtOAc 75/25, separation of the solid methyl 4-amino-2-chloro-5-iodobenzoate by filtration and evaporation of the mother liquid. LC-MS (B): tR = 0.72 min; [M+CH3CN+H]+: 352.79 In addition, pure methyl 4-amino-2-chloro-5-iodobenzoate regioisomer was isolated as pink to orange solid. LC-MS (B): tR = 0.75 min; [M+CH3CN+H]+: 352.80

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Methyl 4-amino-2-chlorobenzoate.

Reference:
Patent; ACTELION PHARMACEUTICALS LTD; HILPERT, Kurt; HUBLER, Francis; RENNEBERG, Dorte; STAMM, Simon; WO2014/97140; (2014); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 55666-43-8, name is tert-Butyl 3-bromopropanoate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 55666-43-8, 55666-43-8

Preparation in accordance with scheme 6. To a solution of 6-((2,6- dichlorobenzyl)oxy) -1,2,3, 4-tetrahydro-2, 7 -naphthyridine (80 mg; 0.259 mmol; 1 eq) in 10 mL acetonitrile were added tert-butyl 3-bromopropanoate (56.8 mg; 0.272 mmol; 1.05 eq) and triethylamine (131 mg; 1.29 mmol; 5 eq). The mixture wasstirred at RT overnight. The mixture was extracted with water/ethylacetate. The organic phase was washed with water, dried with MgSO4, and evaporated. The residue was purified by flash chromatography (4g silica gel; 3-10% MeOH in DCM) giving the product with a yield of 40 mg (0.09 1 mmol; 35.3%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, tert-Butyl 3-bromopropanoate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ABBVIE INC.; ABBVIE DEUTSCHLAND GMBH & CO. KG; LANGE, Udo; OCHSE, Michael; VAN DER KAM, Elizabeth; VAN BERGEIJK, Jeroen; TURNER, Sean; OELLIEN, Frank; WALLESER, Patrick; AMBERG, Wilhelm; HORNBERGER, Wilfried; GENESTE, Herve; MEZLER, Mario; HUTCHINS, Charles; (301 pag.)WO2017/36978; (2017); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 115118-68-8 name is Diisopropyl 3,3-dimethoxycyclobutane-1,1-dicarboxylate, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. 115118-68-8

3-Oxo-cyclobutanecarboxylic acid; [1244] 3,3-Dimethoxy-cyclobutane-1,1-dicarboxylic acid diisopropyl ester (0.1 mmol, 30 g) was refluxed in 20% HCI aqueous solution for 60 h. Part of the HCI aqueous solution was evaporated under high vacuum and light brown color oil remained. The oil was dissolved by EtOAc and washed by brine. The organic layer was dried by NaS04, filtered, and evaporated under vacuum. The title compound was obtained as an off-white solid after recrystallization from chloroform.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Diisopropyl 3,3-dimethoxycyclobutane-1,1-dicarboxylate, and friends who are interested can also refer to it.

Reference:
Patent; OSI PHARMACEUTICALS, INC.; WO2005/97800; (2005); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

85920-63-4, Name is 5-(1-Hydroxyethylidene)-2,2-dimethyl-1,3-dioxane-4,6-dione, 85920-63-4, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows.

Acetyl-Meldrum?s acid (309 mg, 1.66 mmol) was added to a solution of the denosylated precursor from the preceding reaction (300 mg, 663 mumol) in dioxane (15 mL). The reaction was stirred for 90 min at 80 C. Then a solution of KOH in MeOH (0.1 M, 16.6 mL, 1.66 mmol) was added and stirring was continued for another 60 min at 80 C. The solvent was removed under reduced pressure and the residue separated between DCM and aqueous ammonium chloride. The aqueous phase was extracted twice with DCM and the combined organic layers were dried over Na2SO4. Filtration and evaporation of the solvent under reduced pressure gave a crude product (347 mg), which yielded 16 (260, 80%) as a 1:1 mixture of diastereomers after chromatographic purification (DCM/MeOH 25/1). The diastereomers of a small sample were separated by semipreparative HPLC (ACN/H2O 70/30). Rf (DCM/MeOH 95/5): 0.45. (6aR,11aS,11bR)-N-tosyl-CPA 16a (cis-C/D ring connection): 1H NMR (600 MHz; CDCl3): delta=7.85 (d, J=8.4 Hz, 2H), 7.78 (d, J=8.3 Hz, 1H), 7.55 (s, 1H), 7.30-7.27 (m, 1H), 7.25 (d, J=8.2 Hz, 2H), 7.05 (d, J=7.3 Hz, 1H), 4.00 (d, J=10.9 Hz, 1H), 3.58 (dd, J=10.9, 6.0 Hz, 1H), 3.02 (dd, J=16.3, 5.8 Hz, 1H), 2.94 (dd, J=16.1, 11.7 Hz, 1H), 2.59 (Psidt, J=11.6, 5.9, 5.9 Hz, 1H), 2.49 (s, 3H), 2.36 (s, 3H), 1.67 (s, 3H), 1.58 (s, 3H); 13C NMR (125 MHz; CDCl3): delta=194.3, 185.0, 175.4, 144.7, 135.6, 133.1, 129.8 (CH), 129.3, 128.4, 126.9 (CH), 125.5 (CH), 122.9 (CH), 120.6 (CH), 116.2, 111.6 (CH), 105.4, 70.7 (CH), 63.6, 52.4 (CH), 35.4 (CH), 26.1 (CH3), 26.1 (CH2), 24.4 (CH3), 21.5 (CH3), 19.8 (CH3); HR-ES-MS: m/z=513.1449 (calcd 513.1455 for C27H26N2NaO5S); IR: nu=3415, 1709, 1614 cm-1. (6aS,11aS,11bR)-N-Tosyl-CPA 16b (trans-C/D ring connection): 1H NMR (600 MHz; CDCl3): delta=7.85 (d, J=8.4 Hz, 2H), 7.82 (d, J=8.2 Hz, 1H), 7.55 (d, J=1.7 Hz, 1H), 7.29 (Psit, J=7.8 Hz, 1H), 7.25 (d, J=8.1 Hz, 2H), 7.06 (d, J=7.3 Hz, 1H), 4.09 (d, J=10.7 Hz, 1H), 2.95 (Psidt, J=11.4, 1.7 Hz, 1H), 2.92 (dd, J=15.6, 4.6 Hz, 1H), 2.88 (dd, J=15.5, 11.8 Hz, 1H), 2.52 (s, 3H), 2.37 (s, 3H), 2.32, (Psidt, J=11.8, 11.8, 4.6 Hz, 1H), 1.60 (s, 3H), 1.53 (s, 3H); 13C NMR (125 MHz; CDCl3): delta=193.6, 185.6, 174.6, 144.7, 135.7, 133.7, 130.9 (CH), 129.9, 129.4, 126.9 (CH), 125.6 (CH), 121.3 (CH), 121.2 (CH), 118.0, 111.9 (CH), 105.3, 71.2 (CH), 62.1, 58.0 (CH), 38.4 (CH), 28.0 (CH3), 27.2 (CH2), 21.5 (CH3), 19.8 (CH3), 19.7 (CH3); HR-ES-MS: m/z=489.1497 (calcd 489.1490 for C27H25N2O5S); IR: nu=3362, 1611 cm-1.

Statistics shows that 5-(1-Hydroxyethylidene)-2,2-dimethyl-1,3-dioxane-4,6-dione is playing an increasingly important role. we look forward to future research findings about 85920-63-4.

Reference:
Article; Beyer, W.R. Christian; Woithe, Katharina; Lueke, Bettina; Schindler, Michael; Antonicek, Horst; Scherkenbeck, Juergen; Tetrahedron; vol. 67; 17; (2011); p. 3062 – 3070;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics