Esters-buliding-blocks

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 51760-21-5 as follows. COA of Formula: C10H9BrO4

StepA: Pd0 couplingTo a solution of dimethyl 5-bromo-isophthalate (5.75 g, 21.1 mmol) in THF (50 ml) was added 2- cyanophenylzinc bromide (50.5 ml, 25.3 mmol) followed by tetrakis(triphenylphosphine)palladium (0) (0.122 g, 0.105 mmol). The solution was stirred overnight at 50 C. The next day the solution was cooled, filtered, and concentrated in vacuo. Purification by flash chromatography on silica gel (25% EtOAc in Hexanes) afforded 3.8g. lH NMR (400 MHz, CDCI3) delta 8.41 (d, J = 1.6 Hz, 1H), 7.85-7.80

According to the analysis of related databases, 51760-21-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; MERCK & CO., INC.; WO2006/55434; (2006); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Synthetic Route of 27798-60-3,Some common heterocyclic compound, 27798-60-3, name is Methyl 2-Methoxyphenylacetate, molecular formula is C10H12O3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Preparation of methyl 2-(2-methoxyphenyl)-3-phenylpropanoate (27): A 50OmL round- bottom flask is charged with methyl 2-(2-methoxyphenyl)acetate (8.496 g, 47 mmol, leq) and THF (20OmL). The homogeneous mixture is cooled to 0 0C in an ice bath. Lithium diisopropyl amide (23.5mL of a 2.0M solution in heptane/THF) is added, maintaining a temperature less than 30C. The reaction is stirred 45 minutes at this reduced temperature. Benzyl bromide (5.6mL, 47mmol, leq) is added dropwise. The reaction is allowed to gradually warm to roomtemperature and is stirred for 18 hours. The reaction is quenched with IN HCl and extracted 3 times with equal portions of EtOAc. The combined extracts are washed with H2O and brine, dried over Na2SO4, filtered, and concentrated. The residue is purified over silica to afford 4.433g (35%) of the desired compound. ESI+ MS 293 (M+Na).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Methyl 2-Methoxyphenylacetate, its application will become more common.

Reference:
Patent; AKEBIA THERAPEUTICS INC.; SHALWITZ, Robert; WO2011/5330; (2011); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Reference of 28868-76-0, These common heterocyclic compound, 28868-76-0, name is Dimethyl 2-chloromalonate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

b) 18.2 g of 2-chloro-5-methoxyphenol were dissolved in 150 ml of dry methanol. 9.3 g of MeONa were added, followed by 25 g of dimethyl chloromalonate. The reaction mixture was stirred at 50 C. for 2 hours. After distillation of the solvent the residue was partitioned between toluene and H2 O in a separating funnel and washed neutral. After crystallization in ethanol there was obtained (2-chloro-5-methoxy)phenoxy-dimethylmalonate, white crystals with m.p. 68-69 C.

Statistics shows that Dimethyl 2-chloromalonate is playing an increasingly important role. we look forward to future research findings about 28868-76-0.

Reference:
Patent; Hoffmann-La Roche Inc.; US5837708; (1998); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Synthetic Route of 1504965-88-1, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1504965-88-1, name is Methyl 5-amino-2-fluoro-4-methylbenzoate, This compound has unique chemical properties. The synthetic route is as follows.

To a solution of methyl 5-amino-2-fluoro-4-methyl-benzoate (500 mg, 2.73 mmol) in methanol (3 mL) was added ammonia (2 mL of 7 M, 14 mmol), and the mixture was stirred for 16 hours at room temperature. Additional ammonia (2 mL of 7 M, 14 mmol) was added and the reaction was stirred for 6 hours. The reaction mixture was concentrated in vacuo to afford 5-amino-2-fluoro-4-methyl- benzamide (390 mg, 85%) as a yellow solid. ESI-MS m/z calc. 168.07, found 169.0 (M+l)+; retention time (Method F): 0.42 minutes (1.5 minute run).

The chemical industry reduces the impact on the environment during synthesis Methyl 5-amino-2-fluoro-4-methylbenzoate. I believe this compound will play a more active role in future production and life.

Reference:
Patent; VERTEX PHARMACEUTICALS INCORPORATED; AHMAD, Nadia; ANDERSON, Corey; ARUMUGAM, Vijayalaksmi; ASGIAN, Iuliana, Luci; CAMP, Joanne, Louise; FANNING, Lev Tyler, Dewey; HADIDA RUAH, Sara, Sabina; HURLEY, Dennis; SCHMIDT, Yvonne; SHAW, David; SHETH, Urvi, Jagdishbhai; THOMSON, Stephen, Andrew; (691 pag.)WO2019/14352; (2019); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

These common heterocyclic compound, 89-71-4, name is Methyl 2-methylbenzoate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C9H10O2

To a mixture of methyl 2-methylbenzoate (5.0 g, 0.033 mmol) and N- bromosuccinimide (5.9 g, 0.033 mmol) in CCU (50 ml_) was added benzoyl peroxide (0.04 g, 0.00016 mmol). The mixture was heated to reflux for 1.5 h, cooled to room temperature, filtered through Celite, and concentrated to afford methyl 2- (bromomethyl)benzoate (7.2 g, ca. 94% mass recovery), which was contaminated with ca. 14% unreacted starting material and was used without purification.

The synthetic route of Methyl 2-methylbenzoate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; WYETH; WO2006/128142; (2006); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1150566-27-0, name is Ethyl 6-chloroimidazo[1,2-b]pyridazine-3-carboxylate, A new synthetic method of this compound is introduced below., Computed Properties of C9H8ClN3O2

To a solution of 0.25 g (0.92 mmol) of compound 7-3 dihydrochloride salt in 23 mL of DMSO was added 0.19 g (0.86 mmol) of ethyl 6-chloroimidazo[1 ,2-b]pyridazine-3-carboxylate and 0.40 g (6.8 mmol) of KF. The mixture was stirred at 180 C for 2 h and cooled down to rt. It was diluted with 250 mL of water and extracted with 250 mL of ethyl acetate. The combined organic extracts were washed with brine and dried over anhydrous Na2S04. After filtration, the filtrate was concentrated to afford a residue, which was purified by Prep-TLC (ethyl acetate / petroleum ether = 1 :1 ) to afford compound 7-4. LC-MS: m/e = 386 [M+H]+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ANGEX PHARMACEUTICAL, INC.; WU, Wen-Lian; YANG, Zhiqiang; LEE, Francis; TAN, John Qiang; (112 pag.)WO2019/94143; (2019); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 3196-23-4, name is Methyl 1-bromocyclohexanecarboxylate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 3196-23-4, HPLC of Formula: C8H13BrO2

A mixture of 3 g of finely chipped zinc, catalytic amount of mercuricchloride, 30 ml of anhydrous benzene, 1 ml of HMPTA, 25 mmol (5.53 g) of methyl 1-bromocyclohexanecarboxylate, and10 mmol (2.03 g) of compound II was boiled for 4 h, cooled, and decanted from the excess zinc; then it was hydrolyzed with5% acetic acid; the organic layer was separated, and the reaction products were twice extracted from the aqueous layer withethyl acetate. When the extract was dried with anhydrous sodium sulfate, the solvents were distilled, and compound III wasrecrystallized from ethanol. The yield was 1.85 g (59%)

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Kirillov; Nikifirova; Dmitriev; Baibarodskikh; Journal of Structural Chemistry; vol. 57; 6; (2016); p. 1263 – 1265; Zh. Strukt. Kim.; vol. 57; 6; (2016); p. 1327 – 1329,3;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 5202-89-1, name is Methyl 2-amino-5-chlorobenzoate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 5202-89-1, Application In Synthesis of Methyl 2-amino-5-chlorobenzoate

Water was added (5 ml) to a stirred suspension of 2-amino-5-chloro methyl benzoate (0.33 g, 1.77 mmol) in concentrated hydrochloric acid (1.1 ml) at [0C.] A solution of sodium nitrite (0.12 g, 1.77 [MMOL)] in water (1 [ML)] was added dropwise and the solution stirred until complete dissolution. The diazonium salt was brought to Ph. 6.0. with saturated sodium bicarbonate. In a separate flask, a solution of [CUS04.] 5H20 (0.53 g, 2.12 [MMOL)] in water (2 [ML)] was added dropwise to a stirred solution of potassium cyanide (0.53 g, 8.13 [MMOL)] in water (2 [ML)] at [0C.] Toluene (3 [ML)] was added and the resultant brown mixture stirred and heated to [60C.] The previously prepared diazonium solution was added to the Cu [(I)] CN at [60C] over a period of 30 mins. The reaction mixture was heated to [70C] for an additional 1 hour, then cooled to room temperature. The brown mixture was diluted with ethyl acetate (70 [MI),] filtered through a pad of [CELITE,] washed with ethyl acetate (3 x 20 ml), the combined organics washed with brine (50 [ML),] dried over magnesium sulfate, filtered and the solvent removed by evaporation under reduced pressure to give a dark orange solid. The solid was dissolved in minimum [DICHLOROMETHANE] was purified by flash chromatography on silica gel eluting with a solvent gradient of heptane: ethyl acetate (3: 1) to give the title compound (0.23 g, 65 %) as an off-white solid. H-NMR (400 MHz, [CDCI3)] : [9] = 4.0 (s, 3H), 7.62 (dd, [1H),] 7.72 (dd, [1H),] 8.12 (d, 1H). LRMS (Electrospray) : m/z [M + [H] + 218.] Microanalysis : Found: C, 55.16 ; H, 3.09 ; N, 7. 08. [C9H6N02CI] requires C, 55.26 ; H, 3.09 ; N, 7.16%.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 2-amino-5-chlorobenzoate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; PFIZER LIMITED; PFIZER INC.; WO2004/14357; (2004); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 121-98-2, name is Methyl 4-methoxybenzoate, A new synthetic method of this compound is introduced below., Quality Control of Methyl 4-methoxybenzoate

General procedure: To a solution of methyl ester of aromatic carboxylic acid 2 (0.1 mol) in methanol (30 mL), hydrazine hydrate (0.2 mol) was added drop wise with stirring. The resulting mixture was allowed to reflux for 8 h. After the completion of the reaction as monitored by TLC, the excess methanol was distilled off under reduced pressure. The resulting acid hydrazide 3 was washed with cold water, dried and recrystallized from ethanol.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Murty, Madugula S.R.; Katiki, Mohana R.; Rao, Busam R.; Narayanan, Sai S.; Anto, Ruby J.; Buddana, Sudhreer K.; Prakasham, Reddy S.; Devi, Bethala L.A.P.; Prasad, Rachapudi B.N.; Letters in drug design and discovery; vol. 13; 9; (2016); p. 968 – 981;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 15012-36-9, name is Methyl 2,3-dimethylbenzoate, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: Methyl 2,3-dimethylbenzoate

Compound 5 (53.3 g; 0.32 mol) was dissolved in carbon tetrachloride (850 mL), under nitrogen. To the solution was added N-bromosuccinimide (115.5 g; 0.65 mol) and 2,2′-azobis(2-methyl-propionitrile (1.6 g; 0.010 mol). The reaction mixture was stirred at reflux for approximately 2 hours and the colour of this mixture changed from yellow to colorless. It was allowed to cool to room temperature and filtered off. The filtrate was evaporated in vacuo to give compound 6 (98.7 g; 96%) as a yellow liquid.1H-NMR (300 MHz, CDCI3): delta 3.95 (s, 3H), 4.68 (s, 2H), 5.14 (s, 2H), 7.36 (t, 1H), 7.55 (dd, 1 H), 7.90 (dd, 1 H). GC-MS m/z = 322.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 15012-36-9.

Reference:
Patent; PFIZER PRODUCTS INC.; WO2008/53319; (2008); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics