Esters-buliding-blocks

Adding a certain compound to certain chemical reactions, such as: 130754-19-7, name is Ethyl 2-(4-Chlorophenyl)-2,2-difluoroacetate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 130754-19-7, Safety of Ethyl 2-(4-Chlorophenyl)-2,2-difluoroacetate

Part 2. Ethyl 4-chlorophenyl-2,2-difluoroacetate (250 mg) and potassium hydroxide (300 mg) were mixed in 27 ml of ethanol and 2.4 ml of water and the reaction mixture was refluxed for four hours. The mixture was then acidified and extracted with ethyl acetate. The organic layer was washed with water, dried over anhydrous Na2 SO4 and the solvent was removed in vacuo to give a product which was dissolved in 410 mg of oxalyl chloride with catalytic amount of N,N-dimethylformamide. The mixture was stirred for two hours and excess oxalyl chloride was removed in vacuo to give 4-chlorophenyl-2,2-difluoroethanoyl chloride which was used as is for the subsequent step.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Ethyl 2-(4-Chlorophenyl)-2,2-difluoroacetate, and friends who are interested can also refer to it.

Reference:
Patent; The Dupont Merck Pharmaceutical Company; US5583147; (1996); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Application of 145576-28-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 145576-28-9, name is Ethyl 4-methylenecyclohexanecarboxylate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Cap N-8 At 0 C., to a solution of ethyl 4-methylenecyclohexanecarboxylate (0.08 g) in DCE (1 mL) was added chloroiodomethane (0.110 mL, 1.522 mmol), followed by the addition of 1 N diethylzinc in hexane (0.761 mL, 0.761 mmol). The reaction was stirred at 0 C. for 1 hr, then stirred at rt for 18 hrs. The reaction mixture was diluted with EtOAc and 1 N HCl, the organic phase was washed with sat. NaCl, dried over anhydrous Na2SO4, filtered and concentrated. The crude product was charged to a 25 g silica gel cartridge which was eluted with a 20 min gradient of 0-6% EtOAc in hexane to yield ethyl spiro[2.5]octane-6-carboxylate. 1H NMR (400 MHz, CDCl3) delta ppm 4.08-4.18 (2H, m), 2.32 (1H, tq, J=11.01, 3.53 Hz), 1.85-1.93 (2H, m), 1.53-1.74 (4H, m), 1.28-1.35 (2H, m), 1.22-1.28 (3H, m), 0.28 (2H, ddd, J=8.53, 5.52, 1.51 Hz), 0.17-0.25 (2H, m).

The synthetic route of Ethyl 4-methylenecyclohexanecarboxylate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bristol-Myers Squibb Company; Hewawasam, Piyasena; Kadow, John F.; Lopez, Omar D.; Meanwell, Nicholas A.; Tu, Yong; Wang, Alan Xiangdong; Xu, Ningning; Gupta, Samayamunthula Venkata Satya Arun Kumar; Srinivasu, Pothukanuri; Kumar, Indasi Gopi; Kumar, Ponugupati Suresh; Belema, Makonen; Fridell, Robert A.; Gao, Min; Lemm, Julie A.; O’Boyle, II, Donald R.; Sun, Jin-Hua; Wang, Chunfu; Wang, Ying-Kai; US2013/183269; (2013); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Application of 369-26-6,Some common heterocyclic compound, 369-26-6, name is Methyl 3-amino-4-fluorobenzoate, molecular formula is C8H8FNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 37: 2-Propen-1-yl {5-[(2-chloro-4-pyrimidinyl)acetyl]-2-fluorophenyl}carbamate; Step A: Methyl 4-fluoro-3-{[(2-propen-1-yloxy)carbonyl]amino}benzoate; To a solution of methyl 3-amino-4-fluorobenzoate (109 g, 644 mmol) in THF (2000 mL), saturated NaHCO3 (68 g, 805 mmol) was added. Then 2-propen-1-yl chloridocarbonate (93 g, 773 mmol) was added dropwise at 0 C. The mixture was stirred at rt for 2 h. The solution was extracted with EtOAc (500 mL¡Á3). The combined organic layers were washed with water and brine successively, dried over Na2SO4, filtered and concentrated under reduced pressure to give the crude product (160 g, 98%), which was used in the next step directly. 1H NMR (400 MHz, CDCl3) delta ppm 8.72-8.81 (m, 1H), 7.71-7.79 (m, 1H), 7.09-7.16 (m, 1H), 6.87-6.94 (br, 1H), 5.91-6.03 (m, 1H), 5.41 (d, J=17.1 Hz, 1H), 5.28 (d, J=10.5, 1H), 4.70 (d, J=10.5 Hz, 1H), 4.70 (d, J=5.5 Hz, 2H), 3.90 (s, 3H).

The synthetic route of 369-26-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Adams, Jerry Leroy; Dickerson, Scott Howard; Johnson, Neil W.; Kuntz, Kevin; Petrov, Kimberly; Ralph, Jeffrey M.; Rheault, Tara Renae; Schaaf, Gregory; Stellwagen, John; Tian, Xinrong; Uehling, David Edward; Waterson, Alex Gregory; Wilson, Brian; US2009/298815; (2009); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 39149-80-9, name is tert-Butyl 2-bromopropanoate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 39149-80-9, Computed Properties of C7H13BrO2

(1) Preparation of 2-(quinolin-5-yloxy)propanoic acid (A01): Quinolin-5-ol (0.868 g, 5.98 mmol) and tert-butyl 2-bromopropanoate (1.25 g, 0.97 mL, 5.98 mmol) and cesium carbonate (1.95 g, 5.98 mmol) were added into DMF (10 mL) in a 20 mL microwave vial equipped with a stir bar and sealed. The mixture was heated in Biotage microwave synthesizer for 1 hour at 100 C. The solvent was removed and the remained sticky oil was dissolved in DCM (7 mL) and TFA (7 mL). The mixture was stirred overnight. The reaction mixture was neutralized with sodium bicarbonate and organic layer was separated from the mixture. The aqueous layer washed with DCM (2*10 mL), combined organics and acidified with 2N HCl. Aqueous was extracted with ethyl acetate, dried with sodium sulfate and concentrated to a dark orange oil. The crude product was dissolved in DCM (4 mL) and a pure product (0.855 g) precipitate out from the solution by adding diethyl ether (4 mL).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, tert-Butyl 2-bromopropanoate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Bristol-Myers Squibb Company; US2007/287730; (2007); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Reference of 42122-44-1,Some common heterocyclic compound, 42122-44-1, name is Methyl 3-(4-fluorophenyl)propiolate, molecular formula is C10H7FO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

c Methyl 2-(4-fluorophenyl)-pyrazolo[1,5-a]pyridine-3-carboxylate A stirred solution of methyl 3-(4-fluorophenyl)propiolate (8.02 g, 45 mmol) and 1-aminopyridinium iodide (10 g, 45 mmol) in dry acetonitrile (150 mL) was cooled to about 0 C. A solution of 1,8-diazabicycloundec-7-ene (13.7 g, 90 mmol) in dry acetonitrile (50 mL) was added dropwise over 1 h. The mixture was allowed to stir at room temperature for about 18 h. The reaction mixture was cooled in an ice bath for about 30 min and the precipitate was collected by filtration and washed with cold acetonitrile (10 mL). The solid was dried under reduced pressure to give the title compound as a white solid, 8.48 g (70%). 1H NMR (CDCl3) delta 8.50 (d, 1H, J=8.4 Hz), 8.18 (d, 1H, J=8.8 Hz), 7.78 (m, 2H), 7.42 (t, 1H, J=8.4 Hz), 7.13 (t, 2H, J=8.8 Hz), 6.97 (td, 1H, J=6.8, 1 Hz). MS (+ve ion electrospray) 271 (100), (MH+).

The synthetic route of 42122-44-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Alberti, Michael John; Baldwin, Ian; Cheung, Mui; Cockerill, Stuart; Harris, Philip; Jung, David; Peckham, Gregory; Peel, Michael; Badiang, Jennifer; Stevens, Kirk; Veal, James; US2004/53942; (2004); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Related Products of 681465-85-0, The chemical industry reduces the impact on the environment during synthesis 681465-85-0, name is Methyl 4-amino-3-isopropoxybenzoate, I believe this compound will play a more active role in future production and life.

To 10-Chloro-2-cyclopentyl-6-methyl-2,6,9,11-tetrazabicyclo[5.4.0]undeca-8,10,12-trien-5-one (Intermediate 1, 190 mg, 0.68 mmol) was added a solution of Methyl4-amino-3-propan-2-yloxy-benzoate (Intermediate 71, 145 mg, 0.69 mmol) in ethanol (4 mL), followed by water (12 mL). Concentrated hydrochloric acid (36%; 140 mul) was added and the reaction heated to 80 C., with stirring, overnight. The reaction was allowed to stand and cool overnight, before evaporating ethanol. The aqueous residue was diluted to 40 mL with water and the solution basified to pH 9 by addition of a few drops of aq. ammonia, The resultant emulsion was treated with a little brine and extracted with DCM (2¡Á30 mL). The biphasic mixture was poured into a PTFE cup and the organic phase allowed to drip through under gravity. Evaporation of the organic phase afforded an amber gum, which was purified by flash chromatography on silica (40 g Si cartridge; ISCO companion), eluting with a rising gradient of 25-100% ethyl acetate in iso-hexane. Product containing fractions were combined and evaporated to give a colourless gum which was triturated with a small amount of diethyl ether and the resultant solid collected by suction filtration and dried to afford the title compound as a white solid (132 mg, 43%)1H NMR (400.132 MHz, DMSO-D6) delta 1.36 (d, 6H), 1.58-1.77 (m, 6H), 1.95 (m, 2H), 2.60 (m, 2H), 3.18 (s, 3H), 3.64 (m, 2H), 3.83 (s, 3H), 4.77 (m, 2H), 7.53 (m, 1H), 7.57 (m, 1H), 7.78 (s, 1H), 8.10 (s, 1H), 8.51 (d, 1H); MS m/z 452 [M+H]+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 4-amino-3-isopropoxybenzoate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ASTRAZENECA AB; US2008/9482; (2008); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 4224-69-5 as follows. Recommanded Product: Methyl 2-(bromomethyl)acrylate

General procedure: Into a round bottom flask charged with a magnetic stirbar was added 1.0 equiv. allylic bromide. This material was suspended in deionized water to produce a 1.0 M suspension. 1.5 volumetric equiv. of THF (w/respect to H2O) were then added with vigorous stirring, followed by 1.5 equiv. aldehyde and 1.1 equiv. indium powder. The reaction mixture was stirred for 12 hours, then was partitioned between EtOAc and deionized water. After separating the organic layer, the residual product was extracted with multiple portions (as necessary) of ethyl acetate. The combined organic layers was washed with brine, dried with Na2SO4, filtered, concentrated, and purified via column chromatography.

According to the analysis of related databases, 4224-69-5, the application of this compound in the production field has become more and more popular.

Reference:
Article; Nicponski, Daniel R.; Tetrahedron Letters; vol. 55; 13; (2014); p. 2075 – 2077;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 23877-12-5, name is tert-Butyl 2-bromo-2-methylpropanoate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. category: esters-buliding-blocks

59.1) tert-butyl 2-methyl-2-(10H-phenothiazin-2-yloxy)propanoate: 1.93 g (3 eq.) of K2CO3 is added to a solution of 1 g (4.6 mmol) of intermediate 21.1 in 10 ml of DMF. The reaction mixture was heated to 60 C. before the addition of 1.73 ml (2 eq.) of tert-butyl 2-bromoisobutyrate. The mixture is then taken to 110 C. and stirring is maintained at this temperature for 6 hours. After returning to 20 C., the mixture is poured into 100 ml of water and the product is extracted using twice 100 ml of ethyl acetate. The organic solution is finally washed with 100 ml of salt water, dried over sodium sulphate, filtered and concentrated to dryness under vacuum. The evaporation residue is purified on a silica column, eluent: ethyl acetate/heptane (1/9). 450 mg of a pale pink solid is obtained with a yield of 28%. Melting point: 138-140 C.

The synthetic route of 23877-12-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Auvin, Serge; Chabrier De Lassauniere, Pierre-Etienne; US2005/222045; (2005); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Electric Literature of 22223-49-0, The chemical industry reduces the impact on the environment during synthesis 22223-49-0, name is Methyl 2-amino-3-methylbenzoate, I believe this compound will play a more active role in future production and life.

Example 64 – Preparation of methyl 3-methyl-N-(6-methyl-1,2,4-triazolo[1,5-a]pyrimidine-2-sulfonyl)anthranilate Methyl 3-methylanthranilate (2.1 g, 13 mmol) was dissolved in 4 ml pyridine and 6-methyl-1,2,4-triazolo[1,5-a]pyrimidine-2-sulfonyl chloride was added. After a mild exothermic reaction subsided the reaction mixture was stirred at 50C for 24 hours. The pyridine was removed by evaporation at reduced pressure and the residue was treated with in 10% aqueous sodium bicarbonate. Insouble material was collected by filtration, washed with ether and dried to yield 2.9 (63%) of the desired product as a solid, mp 198.5-205C. An analytical sample was prepared by recrystallization from ethanol to yield a crystalline solid, mp 208.5-210.5C. IR and 1H NMR spectra were in agreement with the assigned structure.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 2-amino-3-methylbenzoate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; THE DOW CHEMICAL COMPANY; EP142152; (1991); B1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 927-68-4, name is 2-Bromoethyl acetate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 927-68-4, Recommanded Product: 2-Bromoethyl acetate

(R)-7-chloro-N-(piperidin-3 -yl)-4-(trifluoromethyl)benzo[b]thiophene-2-carboxamide (TFA salt, 95 mg, 0.20 mmol), Nal (50 mg, 0.33 mmol), K2C03 (180 mg, 1.30 mmole), 2- bromoethyl acetate (32 uL, 0.29 mmol) and DMF (2 mL) were added into a reaction flask, and stirred at room temperature overnight. The mixture was dissolved in ethyl acetate (20 mL) and water (5 mL). The layers were separated and the aqueous layer was extracted with ethyl acetate (2x). The ethyl acetate layer was concentrated in vacuo and chromatographed on silica gel using hexanes and ethyl acetate to give title compound (50 mg, 0.11 mmol, 56%). ?H NMR (CD3OD, 400 MHz) 8.34 (s, 1H), 7.83 (dd, IN, J 0.4, 8.0 Hz), 7.68 (dd, 1H, J?0.4, 8.0 Hz), 4.50 (m, 2H), 4.38 (m, 1H), 3.73 (m, 1H), 3.56 (m, IH), 3.32 (m, 2H),3.02 (m, 2H), 2.14 (m, 5H), 2.00 (m, 2H), 1.79 (m, 2H). LCMS (ES) 449, 451 (M+H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-Bromoethyl acetate, and friends who are interested can also refer to it.

Reference:
Patent; THE SCRIPPS RESEARCH INSTITUTE; ICAHN SCHOOL OF MEDICINE AT MONT SINAI; THE TRUSTEES OF THE UNIVERSITY OF PENNSYLVANIA; KAMENECKA, Theodore, M.; KENNY, Paul; LINDSTROM, Jon, M.; WANG, Jingyi; JIN, Zhuang; DOEBELIN, Christelle; (95 pag.)WO2016/191366; (2016); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics