Esters-buliding-blocks

Related Products of 75567-84-9, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 75567-84-9, name is Methyl 3-(4-bromophenyl)propanoate, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: In distinct reactors, 3-(bromophenyl)-propionic methyl esters 16, 17 (1.0 equiv) were dissolved in toluene (7 mL). Phenyl boronic acids 18-21 (2 equiv) in EtOH (3.5 mL) and Na2CO3 2 M (2 M, aq, 3.0 equiv) were then added to the corresponding reactors, and the resulting mixtures were deoxygenated with a stream of N2. After 10 min, Pd(PPh3)4 (0.005 equiv) was added and each mixture was stirred at reflux temperature for 5 h under N2, then cooled to room temperature and treated as follows. Each solution was poured into a mixture of H2O (5 mL) and Et2O (5 mL), and the two phases were separated. The aqueous layer was washed with Et2O (5 mL), and the organic phases were combined and washed with 1 M NaOH (5 mL), followed by brine (5 mL), then dried over Na2SO4 and evaporated. Purification of each crude product performed by flash chromatography on silica gel (petroleum ether/EtOAc = 8/2) yielded the corresponding biphenyl propanoic acid methyl esters 22a-e (Scheme 3).

The chemical industry reduces the impact on the environment during synthesis Methyl 3-(4-bromophenyl)propanoate. I believe this compound will play a more active role in future production and life.

Reference:
Article; Chiriano, Gianpaolo; De Simone, Angela; Mancini, Francesca; Perez, Daniel I.; Cavalli, Andrea; Bolognesi, Maria Laura; Legname, Giuseppe; Martinez, Ana; Andrisano, Vincenza; Carloni, Paolo; Roberti, Marinella; European Journal of Medicinal Chemistry; vol. 48; (2012); p. 206 – 213;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 756525-95-8, name is tert-Butyl 9-Amino-4,7-dioxanonanoate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 756525-95-8, Formula: C11H23NO4

Preparation of (9H-fluoren-9-yl)methyl 2-((1-(3-(4-((2-(2-(3-(tert-butoxy)-3- oxopropoxy)ethoxy)ethyl)amino)piperidin-1-yl)-3-oxopropyl)-1H-indol-2-yl)methyl)-1,2- dimethylhydrazine-1-carboxylate (Fmoc-HIPS-PAPip(PEG2(CO2t-Bu))NH) (Figure 62) To a dried scintillation vial containing a magnetic stir bar was added Fmoc-HIPS- piperidinone (355 mg, 0.63 mmol), H2N-PEG2-COOtBu (175 mg, 0.76 mmol), 4 A molecular sieves (activated powder, 100 mg), and 1,2-dichloroethane (2.5 mL). The mixture was stirred for 1 h at room temperature. To the reaction mixture was added sodium triacetoxyborohydride (314 mg, 1.48 mmol). The mixture was stirred for 18 hours at room temperature. The resulting mixture was partitioned between EtOAc and saturated aqueous NaHCO3. The organic layer was washed with saturated aqueous NaHCO3 (2 x 5 mL), and brine (1 x 5 mL), dried over Na2SO4, filtered, and concentrated under reduced pressure to yield the title compound as a yellow oil, which was carried forward without further characterization.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; REDWOOD BIOSCIENCE, INC.; RABUKA, David; ALBERS, Aaron Edward; KUDIRKA, Romas Alvydas; GAROFALO, Albert W.; WO2015/81282; (2015); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 40061-54-9, name is Ethyl 2-(2-chlorophenyl)acetate, A new synthetic method of this compound is introduced below., COA of Formula: C10H11ClO2

General procedure: Ethyl-2-arylacetate (2 mmol), aq.formaldehyde (1 mmol), aq.ammonia / aliphatic / aromatic amines (2 mmol) and a catalytic amount of piperidine and pyridine in abs. ethanol (250 mL) were refluxed for 4 hour. The course of the reaction was monitored by TLC, and after the disappearance of the starting materials, excess of alcohol is removed in vacuo and the residue extracted with benzene and washed with dil.HCl and then with water and dried. The dried benzene extract was purified by passing through a column of SiO2. The residue obtained on evaporation of the solvent, on crystallization (aq. EtOH) gave pure 3, 5-diarylpiperidin-2, 6-diones in appreciable yields (70-90percent).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Babu, Mariappan; Pitchumani, Kasi; Ramesh, Penugonda; Bioorganic and Medicinal Chemistry Letters; vol. 22; 2; (2012); p. 1263 – 1266;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Reference of 99548-55-7,Some common heterocyclic compound, 99548-55-7, name is Methyl 4-bromo-2-methylbenzoate, molecular formula is C9H9BrO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

i 4-Bromo-2-bromomethylbenzoic acid, methyl ester The subtitle compound was prepared from 4-bromo-2-methylbenzoic acid methyl ester (22.5 g) according to the method of example 2 step (i). Yield 26.45 g. Used directly in the next step.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Methyl 4-bromo-2-methylbenzoate, its application will become more common.

Reference:
Patent; AstraZeneca U.K. Limited; US6162808; (2000); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

These common heterocyclic compound, 756525-95-8, name is tert-Butyl 9-Amino-4,7-dioxanonanoate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of tert-Butyl 9-Amino-4,7-dioxanonanoate

SI-22 (270 mg, 1.03 mmol, 1.2 eq.), COMU (440 mg, 1.03 mmol, 1.2 eq.), and N- methylmorpholine (283 pL, 2.57 mmol, 3 eq.) were dissolved in 1.5 mL of DMF and stirred for 1 min. Amino-PEG2-t-butyl ester (200 mg, 0.86 mmol, 1 eq.) was added in 2.5 mL of DMF and the reaction was stirred at room temperature for 1 h. The reaction was diluted with ethyl acetate (lOmL) and the organic phase washed with water (3xl5mL) and brine (lxl5mL). The organic layer was separated, dried over anhydrous MgSCE, and concentrated. The residue was purified by flash chromatography (DCM/EtOAc; 1 : 1) to provide the title compound as a colorless oil (212 mg, 43%). NMR (500 MHz, Chloroform-7) d 7.01 (t, J= 5.7 Hz, 1H), 6.71 (dt, J= 8.7, 2.4 Hz, 1H), 6.68 (s, 1H), 4.43 (s, 2H), 3.74 – 3.69 (m, 2H), 3.67 (td, J= 6.4, 2.0 Hz, 2H), 3.55 (d, j= 2.3 Hz, 4H), 3.51 (ddd, j= 6.5, 3.4, 1.5 Hz, 2H), 2.65 (s, 2H), 2.48 – 2.40 (m, 4H), 2.18 (qd, J= 7.6, 2.1 Hz, 1H), 1.90 (td, j= 6.6, 1.8 Hz, 2H), 1.41 (d, 7= 1.5 Hz, 2H), 1.40 (d, 7= 2.3 Hz, 9H), 1.11 (td, 7= 7.8, 2.6 Hz, 3H). HRMS (ESI) [M+Na]+ for C25H38N207Na 501.2571, found 501.2580.

The synthetic route of tert-Butyl 9-Amino-4,7-dioxanonanoate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; THE SCRIPPS RESEARCH INSTITUTE; ZHANG, Xiaoyu; CROWLEY, Vincent; CRAVATT, Benjamin; (121 pag.)WO2020/77278; (2020); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

1459-93-4, name is Dimethyl isophthalate, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Formula: C10H10O4

Add 100 mL of tetrahydrofuran to the reaction flask.Then add 20.02 g (102.99 mmol) of dimethyl isophthalate and 0.50 g of EDTA-2Na to the inside.Nitrogen gas,Acetone dry ice cooled to -45 C,Control temperature does not exceed -45 C,257mL of 1.0M diisobutyl aluminum hydride toluene solution was added dropwise.After the addition, the reaction is incubated for 2 hours.Temperature control does not exceed 0 C drops 250mL potassium sodium tartrate saturated solution,filter,Liquid separation,The toluene phase is concentrated at 60-70C,Concentrate to 5% of the original volume,There are a lot of solids out,filter,Drying of methyl 3-formylbenzoate 14.20 g at 50CYield 84.02%,98.92% purity.

The synthetic route of 1459-93-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Jinan Xuanhong Bio-pharmaceutical Co., Ltd.; Lou Yadong; Li Zhanjiang; (5 pag.)CN107162906; (2017); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Some common heterocyclic compound, 57053-02-8, name is Dimethyl 2-aminoisophthalate, molecular formula is C10H11NO4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C10H11NO4

2,6-Di(4-hydroxyheptan-4-yl)aniline Xlb (R2 = B). A suspension of fresh magnesium (20.9 g, 0.86 mol, 8.6 eq) in anhydrous THF (300 mL) was treated with the slow addition of a premade solution of n-propylbromide (69.5 mL, 0.77 mol, 7.7 eq) in anhydrous THF (300 mL) over 20 mm in maintaining the temperature below 40 DC. After 1.5 h at room temperature, the suspension was cooled down to 0 DC, causing theformation of a precipitate, and a premade solution of diester X (where R1 is methyl) (20.0 g, 0.10 mol, 1.0 eq) in dry THF (300 mL) was cannulated at 0 DC. The reaction was allowed to warm up to room temperature and was stirred for 2 h. The reaction was then cooled down to 0 DC and carefully quenched with sat. NH4CI solution (300 mL). The mixture was diluted in Et20 (400 mL) and washed with sat. NH4CI solution (2 x 200mL). The organic layer was then dried over anhydrous magnesium sulphate and concentrated under vacuum. The resulting brown crude solid (30.9 g) (Pure by 1H NMR) was then further purified by successive recrystallisation from pentane to give the pure diol XIb (26.6 g, 86%) as a white crystalline solid.1H NMR (400 MHz, CDCI3) 60.90 (12H, app t, J = 7.3 Hz, 4 x CH3), 1.08-1.23 (4H, m,4 x CH), 1.26-1.41 (4H, m, 4 x CH), 1.78-1.88 (4H, td, J = 12.5, 4.5 Hz, 4 x CH), 1.95-2.05 (4H, td, J =12.5, 4.5 Hz, 4 x CH), 4.24 (3H, vbs, NH2 + 2 x OH), 6.54 (1H, t, J =7.7 Hz, H), 6.89 (2H, d, J = 7.7 Hz, H?).13C {H} NMR (100 MHz, COd3) 6 14.5(4 x CH3), 17.2(4 x CH2), 41.2 (4 x CH2), 79.4(2 x C,-OH), 115.1 (CH/1), 126.5(2 x CH(nAr), 128.7(2 x CHOAr), 146.7 (CivNH2). HRMS (NSI+): found m/z [M + H]+ 322.2745, calcd for C20H36O2N 322.2741.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 57053-02-8, its application will become more common.

Reference:
Patent; UNIVERSITY COURT OF THE UNIVERSITY OF ST ANDREWS; NOLAN, Steven P; MEIRIES, Sebastien; WO2014/108671; (2014); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Related Products of 15441-07-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 15441-07-3, name is Methyl 3-(chlorosulfonyl)propanoate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

In a 100 mL round bottom flask, to a solution of methyl 3-(chlorosulfonyl)propanoate (187 mg, 1 mmol) and S-trans, trans-farnesyl-L-cysteine methyl ester (339 mg, 1 mmol) in THF (5 mL) was added N,N-diisopropyl-ethyl-amine (0.52 mL, 3 mmol) dropwise. The solution was stirred at 0 0C for 30 min and then room temperature overnight. The mixture was diluted with ethyl acetate (60 mL) and washed by 0.5 N HCl (10 mL x 1), H2O (10 mL x 1) and brine (10 mL x 1). The organic layer was dried over Na2SO4 and concentrated in vacuo. The resulting residue was dissolved in THF (3 rnL) and a solution Of LiOH-H2O (420 mg, 10 mmol) in H2O (2 mL) was added slowly at 0 0C. The reaction was left at room temperature overnight. The solution was then diluted with ethyl acetate and washed by 0.5 N HCl (10 mL x 1), H2O (10 mL x 2) and brine (15 mL x 1). The organic layer was dried over Na2SO4 and concentrated in vacuo. The residue was then further purified by preparative HPLC (100 mg, 22%) to yield Compound N-80. 1H-NMR (500 MHz, CD3OD): delta 1.50 (s, 3H), 1.51 (s, 3H), 1.57 (s, 3H), 1.61 (s, 3H), 1.86-1.89 (m, 2H), 1.95-2.00 (m, 4H), 2.01-2.06 (m, 4H), 2.65 (dd, J = 8.0, 14.0 Hz, IH), 2.71-2.76 (m, 2H), 2.84 (dd, J = 5.0, 14.0 Hz, IH), 3.13 (dd, J = 7.5, 13.5 Hz, IH), 3.24-3.29 (m, IH), 4.05 (dd, J = 5.0, 8.0 Hz, IH), 4.98-5.03 (m, 2H), 5.09-5.14 (t, J = 8.0 Hz, IH). 13C-NMR (125 MHz, CD3OD): delta 16.15, 16.30, 17.80, 25.95, 27.38, 27.79, 29.56, 30.44, 34.80, 40.78, 40.89, 49.82, 57.51, 121.64, 125.16, 125.46, 132.12, 136.27, 140.62, 174.04, 174.15; ES-MS: mass calcd for Chemical Formula: C21H35NO6S2 461.64. Found (M+) m/z 462.2, (M+Na) m/z 484.2.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 3-(chlorosulfonyl)propanoate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SIGNUM BIOSCIENCES, INC.; STOCK, Jeffry, B.; STOCK, Maxwell; RAPOLE, Keshava; LEE, Seung-yub; VORONKOV, Michael; PEREZ, Eduardo; CHEN, Shuyi; CHEN, Jinglong; GORDON, Joel; WO2010/56778; (2010); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 106-32-1, name is Ethyl octanoate, A new synthetic method of this compound is introduced below., Product Details of 106-32-1

General procedure: In a typical run, a 50 mL stainless steel autoclave equipped with a transducer for online pressure monitoring was charged under air of Pd-pol (10.6 mg, Pd: 0.5 mol%), the substrate (carboxylic acid or ester, 1.0 mmol), bromobenzene (0.1 mmol, 15.7 mg) and alcohol (5.0 mL). The autoclave was then purged three times with hydrogen, then pressurized with 2 bars H2, set on a magnetic stirrer and heated to 40 C. After the minimum time needed to reach reaction completion, the autoclave was let to reach room temperature, the hydrogen was vented and the autoclave opened. When necessary, 3.0 mL diethyl ether was added to the mixture at the end of reaction in order to dissolve organic reactants and products. The catalyst was recovered by centrifugation. The yields were assessed by GLC analysis of the organic solution by using biphenyl (50.0 mg) as internal standard.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Dell’Anna, Maria Michela; Capodiferro, Vito Filippo; Mali, Matilda; Mastrorilli, Piero; Journal of Organometallic Chemistry; vol. 818; (2016); p. 106 – 114;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Related Products of 145576-28-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 145576-28-9, name is Ethyl 4-methylenecyclohexanecarboxylate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

To a solution of ethyl 4-methylenecyclohexanecarboxylate (0.15 g, 0.892 mmol) in diglyme (3 mL) was added a solution of sodium 2-chloro-2,2- difluoroacetate (0.544 g, 3.57 mmol) in 5 ml of diglyme via syringe pump at 0.5 ml/h at 150 C. The reaction was cooled to rt, then diluted with DCM and washed with water, brine, dried over Na2SO4, filtered and concentrated. The residue was chargedto a 40 g silica gel cartridge which was eluted with a 20 mm gradient of 0-20% EtOAc in hexane to yield ethyl 1,1-difluorospiro[2.5]octane-6-carboxylate. ?H NMR (400 MHz, CDC13) ppm 4.09 – 4.19 (2 H, m), 2.29 -2.45 (1 H, m), 1.89 -2.03 (2 H, m), 1.55 – 1.72(5 H, m), 1.45 – 1.54(1 H, m), 1.31 – 1.39 (1 H, m), 1.21 – 1.30(3 H, m), 0.84 – 0.94 (1 H, m).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Ethyl 4-methylenecyclohexanecarboxylate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; HEWAWASAM, Piyasena; LOPEZ, Omar D.; TU, Yong; WANG, Alan Xiangdong; XU, Ningning; KADOW, John F.; MEANWELL, Nicholas A.; GUPTA, Samayamunthula Venkata Satya Arun Kumar; KUMAR, Indasi J. Gopi; PUNUGUPATI, Suresh Kumar; BELEMA, Makonen; WO2015/5901; (2015); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics