Category: esters-buliding-blocks

Some common heterocyclic compound, 14062-30-7, name is Ethyl 2-(3-bromophenyl)acetate, molecular formula is C10H11BrO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 14062-30-7

(3-Cyano-phenyl)-acetic acid ethyl ester A mixture of (3-bromo-phenyl)-acetic acid ethyl ester (9.15 g, 37.6 mmol), copper cyanide (5.06 g, 56.5 mmol), and 1-methyl-2-pyrrolidinone (80 mL) was placed into an oil bath heated at 120 C. behind a protective shield. The reaction was heated to 200 C. for 1 h and additional copper cyanide (spatula tip) was added. After heating for an additional 0.5 h, the reaction was cooled to room temperature. The reaction was diluted with EtOAc and the organic solution was washed with water/ammonium hydroxide solution (2:1 v/v) until the aqueous solution was no longer blue. The organic solution was washed with brine, dried (MgSO4), filtered, and concentrated. Flash chromatography (9:1 hexanes:EtOAc) provided (3-cyano-phenyl)-acetic acid ethyl ester (6.31 g) as a clear oil which solidified on standing. 1H NMR (400 MHz, CDCl3) delta7.57-7.50 (m, 3H), 7.42 (m, 1H), 4.15 (q, 2H), 3.63 (s, 2H), 1.24 (t, 3H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 14062-30-7, its application will become more common.

Reference:
Patent; Pfizer Inc.; US6344485; (2002); B1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Synthetic Route of 34837-84-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 34837-84-8, name is Methyl 2-(4-fluorophenyl)acetate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

5A. Methyl 2-(4-fluorophenyl)-3-(4-(methylsulphonyl)phenyl)-3-oxopropanoate A solution of methyl 2-(4-fluorophenyl)acetate (2.35 g, 14 mmol) in THF (15 mL), at -78° C., was treated dropwise with 1 N lithium bis(trimethylsilyl)amide (14 mL, 14 mmol). After 15 minutes a suspension of 4-(methylsulphonyl)benzoyl chloride (3.3 g, 15 mmol) in THF (25 mL) was added in portions. The reaction mixture was stirred for 60 minutes at -78° C. and at 0 to 5° C. for 12 hours. The mixture was quenched with 10percent citric acid, the THF removed in vacuo, and the residue triturated with hexanes to provide the desired product as a solid (yield: 3.4 g; 69percent). MS (DCI-NH3) m/z 368 (M+H)+; 1H NMR (300 MHz, DMSO-d6) delta3.27 (s, 3H), 3.69 (s, 3H), 6.35 (s, 1H), 7.21 (m, 2H), 7.44 (m, 2H), 8.06 (d, J=9 Hz, 2H), 8.25 (d, J=9 Hz, 2H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 2-(4-fluorophenyl)acetate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Abbott Laboratories; US6472416; (2002); B1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 1459-93-4 as follows. Recommanded Product: Dimethyl isophthalate

In a round bottom flask was added dimethyl terephthalate, 0.07mol substituted and 150 mL of methanol, add 100mL of hydrazine hydrate, refluxed for 24 hours, cooled to room temperature for 5 hours and filtered, washed with water, and dried to give phthalimido-substituted hydrazide.

According to the analysis of related databases, 1459-93-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Guangxi Tianyuan biochemistry Co.Ltd; Zhang, Qing; Li, Weiguo; Li, Xianling; (15 pag.)CN103864711; (2016); B;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Related Products of 14064-10-9, The chemical industry reduces the impact on the environment during synthesis 14064-10-9, name is Diethyl 2-chloromalonate, I believe this compound will play a more active role in future production and life.

MDPD was synthesized according to a procedure described by Shipp et al. Briefly, NaH (1.24 g, 0.0520 mol) was suspended in THF (10 mL) and cooled to 0° C. using an ice bath. A solution of diphenylamine (3.38 g, 0.0200 mol) in DMSO (18 mL) and THF (9 mL) was added and stirred for 1 h at 0° C. Carbon disulfide (2.84 mL, 0.0472 mol) was added and the solution stirred for a further 30 min at 0° C. The solution was then cooled using an ethylene glycol/CO2 bath prior to the addition of diethyl chloromalonate (3.23 mL, 0.0200 mol) and further stirring for 2 h at room temperature. Any remaining NaH was hydrolyzed with methanol and the product was extracted with diethyl ether. Volatiles were then removed and the product was purified using a silica column (ethyl acetate:hexane mix 10:90 to remove diphenylamine impurity, followed by 30:70 to elute product). The product was dried under vacuum to yield a yellow solid (yield 72percent).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Diethyl 2-chloromalonate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ARROWHEAD MADISON INC.; Wakefield, Darren H.; Rossi, Nicholas A.; Sheik, Dan; US2013/121954; (2013); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

24812-90-6, name is Methyl 3-amino-4-methoxybenzoate, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. name: Methyl 3-amino-4-methoxybenzoate

Preparation of the compound of formula VII :; To a solution of METHYL-3-AMINO-4-METHOXYBENZOATE (a compound of FORMULA 11, AVAILABLE FROM INDOFINE CHEMICAL Company, INC., Somerset, New Jersey), (315 g, 1.74 mol) in 1 L MEOH, the crude enone VI (350 g,-2. 09 mol) was added. The reaction was stirred at room temperature for 30 minutes. After cooling to 0C for 1 hour, the solid was filtered and dried under vacuum to give the desired compound of formula Vil, methyl 4-methoxy-3- {[(E)-4-trifluoromethyl-3-oxo-1-butenyl] amino} benzoate, (500 g, 95% yield) as a yellow solid. 1H NMR (400 MHz, CDCI3) a 3.94 (s, 3H), 4.04 (s, 3H), 5.74 (d, J=8.0 Hz, 1H), 7.00 (d, J=8.8 Hz, 1H), 7.79 (dd, J=13. 2,8. 0 Hz, 1H), 7.87 (dd, J=8.8, 2.0 Hz, 1 H), 7.92 (d, J=2.0 Hz, 1 H), 11.01 (br, 1 H)

The synthetic route of 24812-90-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SCHERING CORPORATION; WO2005/28471; (2005); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

59247-47-1, name is tert-Butyl 4-bromobenzoate, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Application In Synthesis of tert-Butyl 4-bromobenzoate

(2S,3’S)-2-Methyl-[1,3′]bipyrrolidinyl dihydrochloride (8) (1.1 g, 4 mmol) was treated with NaOt-Bu (1.1 g, 2equiv) in MeOH (30 mL), filtered, and concentrated. To this flask was added tert-butyl-4-bromo-benzoate (9) (1.0 g, 3.89 mmol), sodium tert-butoxide (538 mg, 5.6 mmol), tris(dibenzylideneacetone)-dipalladium-(0) (35 mg, 0.039 mmol), BINAP (72 mg, 0.116 mmol), and toluene (40 mL) under nitrogen. The reaction flask was heated to 80 °C (external) for 24 h with stirring until the starting material was completely consumed as judged by TLC analysis. The mixture was cooled to room temperature, taken up in DCM (50 mL), filtered, and concentrated. The crude product was then purified by a silica gel flash chromatography eluted with 0-5percent of 7 N NH3/MeOH in DCM to get 1.02 g (80percent) of the title compound as a yellow oil. LCMS: RT = 2.23 min, MS: 331 (M+H+). 1H NMR (300 MHz, CDCl3) delta 7.87 (d, J = 8.7 Hz, 2H), 6.49 (d, J = 8.7 Hz, 2H), 3.6-3.23 (m, 5H), 3.01 (m, 1H), 2.78 (m, 1H), 2.55 (q, J = 8.4 Hz, 1H), 2.22-1.43 (m, 13H), 1.14 (d, J = 6.3 Hz, 3H).

The synthetic route of 59247-47-1 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Gao, Zhongli; Hurst, William J.; Hall, Daniel; Hartung, Ryan; Reynolds, William; Kang, Jiesheng; Nagorny, Raisa; Hendrix, James A.; George, Pascal G.; Bioorganic and Medicinal Chemistry; vol. 23; 3; (2015); p. 429 – 438;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Synthetic Route of 84228-44-4, A common heterocyclic compound, 84228-44-4, name is Methyl 4-amino-3-chlorobenzoate, molecular formula is C8H8ClNO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

4-Amino-3-chloro-benzoic acid methyl ester (21.6 mmol) was saponified in EtOH (25 ml) and NaOH (IM5 25 ml) at reflux for 2h. The organic solvent was evaporated and pH adjusted to 4. The product was removed by filtration, washed with water and dried in vacuo to give A- amino-3-chloro-benzoic acid.Yield: 92%IH NMR (D6-DMSO): 6.15 (s, 2H); 6.79 (d, IH); 7.59 (dd, IH); 7.71 (d, IH); 12.37 (br s,IH).

The synthetic route of 84228-44-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; H. LUNDBECK A/S; WO2006/114093; (2006); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Some common heterocyclic compound, 29006-01-7, name is Methyl 4-methoxybutanoate, molecular formula is C6H12O3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of Methyl 4-methoxybutanoate

The toluenic solution obtained in A) (4.00 Kg of 4-trifluoromethylbenzylamine) was charged in a reactor. After distillation until an oil residue was obtained, 3.20 Kg of methyl 4-methoxybutyrate, 0.40 kg of 30% sodium methylate were added. The solution was then heated to 1 10-1200C, distilling at atmospheric pressure in order to remove all methanol (also methanol freeing from the reaction) and maintaining such temperature for at lest two hours. The reactor at 1 10-120C was then put under vacuum for at least one hour. At the end of the reaction, 12.0 Kg of toluene, 2.0 Kg of water and 0.40 Kg of 80% acetic acid were added to the mass. After stirring, the lower aqueous phase was separated and removed. The organic phase was then distilled under vacuum to a oil residue. To such a residue, 4.00 Kg of ethylacetate, 12.0 Kg of n-hexane were added and the final mass was heated to 40-60 C until a complete solution was obtained. Then the solution was brought to 20-30 C and so maintained until a good precipitation was obtained. The mass was then cooled to 0C – 10C, centrifuged by washing with a mixture of 0.80 Kg of ethylacetate, 4.00 Kg of n-hexane. The obtained humid product was used as such in the following step.About 3.8 Kg of crude N-[4-(trifluoromethyl)benzyl]-4-methoxybutyramide were obtained. Yield: 60.5%

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 29006-01-7, its application will become more common.

Reference:
Patent; LABORATORIO FARMACEUTICO C.T. S.R.L.; WO2009/62949; (2009); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Application of 5445-17-0, The chemical industry reduces the impact on the environment during synthesis 5445-17-0, name is Methyl 2-bromopropanoate, I believe this compound will play a more active role in future production and life.

Methyl 2-bromopropanoate (1.0 eq, 10 g, 59.9 mmol) and triethylphosphite (5.0 eq, 299.5 mmol, 51.5 mL) were combined neat and heated to 110 C. with stirring overnight. The reaction mixture was concentrated, azeotroped with toluene 3×, and dried under high vacuum. The resulting phosphonate was obtained in quantitative yield and was used directly in the following reaction: The phosphonate (1.0 eq, 10.0 g, 44.6 mmol) was dissolved in anhydrous THF (100 mL) and cooled to 0 C. To this mixture, n-BuLi (2.5 M in Hexanes, 18.7 mL, 46.8 mmol, 1.05 eq) was added drop wise. The mixture was stirred for 2 hours at 0 C., then cyclohexanone (1.0 eq, 44.6 mmol, 4.6 mL) was added. The mixture was stirred at 0 C. gradually warming to ambient temperature over 72 hours. The reaction was quenched with saturated aqueous ammonium chloride (500 mL) and concentrated. The remaining aqueous layer was extracted with ethyl acetate (2×200 mL) to give 16.8 g of the crude ester as a yellow oil which was purified by flash column chromatography (hex/ethyl acetate gradient). 3.7 g of a pale yellow oil was obtained as mixture of methyl and ethyl esters in about 1.4:1 molar ratio (21.25 mmol, 48% yield). The isolated mixed ester (3.2 g, 18.36 mmol) was dissolved in ethanol (50 mL) and solid sodium hydroxide (1.0 g, 25 mmol) was added. The mixture was refluxed until reaction was complete. Ethanol was subsequently removed and the residue was partitioned between ethyl acetate (50 mL) and a 1.0 N solution of HCl (50 mL). The aqueous layer was acidified with 6.0 N HCl until acidic and extracted with ethyl acetate (50 mL) again. Combined organic layers were washed with brine and dried over magnesium sulfate. The crude material was purified by flash column chromatography (hex/ethyl acetate gradient) to afford 2.0 g (71% yield) of the desired isomer as a yellow oil in 90% purity by 1H-NMR. (0850) 1H NMR (400 MHz, DMSO-d6): delta, ppm: 12.18 (s, 1H), 2.40 (m, 2H), 2.17 (m, 2H), 1.77 (s, 3H), 1.52 (m, 6H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 2-bromopropanoate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SENOMYX, INC.; Chumakova, Lyudmyla; Patron, Andrew; Priest, Chad; Karanewsky, Donald; Kimmich, Rachel; Boren, Brant Clayton; Hammaker, Jeffrey Robert; Chumakov, Volodymyr; Zhao, Wen; Noncovich, Alain; Ung, Jane; (146 pag.)US2015/376136; (2015); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Some common heterocyclic compound, 23062-51-3, name is Methyl 4-bromobicyclo[2.2.2]octane-1-carboxylate, molecular formula is C10H15BrO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Computed Properties of C10H15BrO2

Methyl 4- bromobicyclo [2.2.2]octane-l-carboxylate (17.0 g, 69.0 mol) was refluxed in aqueous sodium hydroxide solution (1500 mL, 1 %) for 24 h. After cooling, the reaction solution was acidified with hydrochloric acid (6 N, 100 mL) and extracted with diethyl ether (6 x 500 mL). The combined ether layers were dried over magnesium sulfate and concentrated to afford the title compound (10.4 g, 61.1 mmol, 89 % yield), which was used in the next step without further purification. MS (ESI) m/z 169.2 [M-H]~.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 23062-51-3, its application will become more common.

Reference:
Patent; SIGNAL PHARMACEUTICALS, LLC; BENNETT, Brydon, L.; ELSNER, Jan; ERDMAN, Paul; HILGRAF, Robert; LEBRUN, Laurie, Ann; MCCARRICK, Meg; MOGHADDAM, Mehran, F.; NAGY, Mark, A.; NORRIS, Stephen; PAISNER, David, A.; SLOSS, Marianne; ROMANOW, William, J.; SATOH, Yoshitaka; TIKHE, Jayashree; YOON, Won, Hyung; DELGADO, Mercedes; WO2012/145569; (2012); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics