Category: esters-buliding-blocks

Reference of 344-14-9, A common heterocyclic compound, 344-14-9, name is Dimethyl 2-fluoromalonate, molecular formula is C5H7FO4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: In a 50 mL two-necked flask containing dichloromethane (10 mL) were added the amine (17 mmol) followed by the aldehyde (15 mmol) and the resulting reaction mixture was allowed to stir at rt for 2 h, before the fluorinated dicarbonyl system (10 mmol) was added. The reaction mixture was stirred at rt for 16 h, evaporated and the residue dissolved in dichloromethane (20 mL), washed with distilled water (2×20 mL), dried over magnesium sulfate and evaporated, to give the desired product. Further purification by distillation or column chromatography eluting from hexane/ethyl acetate was carried out when appropriate. Analytical and spectroscopic data for each individual compound are listed below. For NMR data only resonances of one diastereoisomer or conformer is given for clarity.

The synthetic route of 344-14-9 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Lisse, Etienne; Sandford, Graham; Journal of Fluorine Chemistry; vol. 206; (2018); p. 117 – 124;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 15964-79-1, name is Methyl 2-(3,4-dimethoxyphenyl)acetate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 15964-79-1, COA of Formula: C11H14O4

Manufacturing Example 13: Preparation of 2-(3,4-Dimethoxyphenyl) acetaldehyde (52) Anhydrous diethyl ether solution containing methyl 3′,4′-dimethoxyphenyl acetate (1.94 g, 9.24 mmol) was stirred, during which DIBAL-H (11.1 mL, 1 M in THF solution) was added thereto drop by drop with maintaining the temperature at -78C. The mixture was stirred at the same temperature for 1 hour. Rochelle aqueous solution was carefully added thereto for 15 minutes. The mixture of the two phases was stirred vigorously at 0 C for 1 hour, which was added to water. The water layer was extracted with EtOAc (*2) and the organic layer was dried over MgSO4, filtered and concentrated under reduced pressure. Then, the obtained residue was purified by flash column chromatography (EtOAc:n-hexane=1:2) to give the compound 52 of Manufacturing Example 13 (yield: 68%, 1.13 g). 1H NMR (CDCl3, 300 MHz) delta 9.66 (t, 1H, J = 2.5 Hz), 6.80 (d, 1H, J = 8.0 Hz), 6.68 (m, 1H), 6.64 (d,

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Methyl 2-(3,4-dimethoxyphenyl)acetate, and friends who are interested can also refer to it.

Reference:
Patent; SNU R&DB Foundation; SUH, Young-Ger; CHANG, Dong-Jo; AN, Hongchan; KIM, Kyu-Won; KIM, Young-Myeong; LEE, Ho-Young; EP2871187; (2015); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 110661-91-1, name is tert-Butyl 4-bromobutanoate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 110661-91-1, Application In Synthesis of tert-Butyl 4-bromobutanoate

[000730] To a solution of Example 1.2.7 (0.103 g) and tert-butyl 4-bromobutanoate (0.032 g) in dichloromethane (0.5 inL) was added N,N-diisopropylethylamine (0.034 mL) at 50 C in a sealed amber vial overnight. The reaction was concentrated, dissolved in dimethyl sulfoxide/methanol (1 : 1, 2 mL) and purified by reverse phase HPLC using a Gilson system, eluting with 5-75% acetonitrile in water containing 0.1% v/v trifluoroacetic acid. The desired fractions were combined and freeze-dried to provide the title compound. MS (ESI) m/e 944.6 (M+l).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, tert-Butyl 4-bromobutanoate, and friends who are interested can also refer to it.

Reference:
Patent; ABBVIE INC.; TAO, Zhi-Fu; DOHERTY, George; WANG, Xilu; SULLIVAN, Gerard M.; SONG, Xiaohong; KUNZER, Aaron R.; WENDT, Michael D.; MARIN, Violeta L.; FREY, Robin R.; CULLEN, Steve C.; WELCH, Dennie S.; SHEN, Xiaoqiang; BENNETT, Nathan B.; HAIGHT, Anthony R.; ACKLER, Scott L.; BOGHAERT, Erwin R.; SOUERS, Andrew J.; JUDD, Andrew S.; (623 pag.)WO2016/94509; (2016); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1014645-87-4, name is Methyl 4-(1-aminocyclopropyl)benzoate hydrochloride, This compound has unique chemical properties. The synthetic route is as follows., Formula: C11H14ClNO2

Description 169: methyl 4-(1-(5-chloro-2-(3-((2,4- difluorophenyl)amino)azetidin-1-yl)nicotinamido)cyclopropyl)benzoate (D169)A mixture of 5-chloro-2-(3-((2,4-difluorophenyl)amino)azetidin-1 -yl)nicotinic acid (D1 18) (40 mg, 0.1 18 mmol), 1 -Hydroxybenzotriazole hydrate (18 mg, 0.1 18 mmol) and 1 -Ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (34 mg, 0.177 mmol) in dimethylformamide (5ml) was stirred 10 min at room temperature. A solution of methyl 4-(1 -aminocyclopropyl)benzoate hydrochloride (D7) (32.2 mg, 0.141 mmol) and triethylamine (0.02ml, 0.141 mmol) in dry dimethylformamide (2ml) was added and the mixture was stirred 24h at room temperature. After solvent evaporation, water (10ml) was added and the formed precipitate was filtered off and purified by Biotage SNAP-Si (1 Og) cartridge eluting with a mixture dichloromethane/methanol from 100/0 to 80/20. Collected fractions, after solvent evaporation afforded the title compound (D169) (105 mg).MS: (ES/+) m/z: 513.2 [MH+] C26H23CIF2N403 requires 512.141 H NMR (400MHz ,DMSO-d6) delta = 9.23 (s, 1 H), 8.21 (d, J = 2.4 Hz, 1 H), 7.91 – 7.80 (m, J = 8.3 Hz, 2 H), 7.74 (d, J = 2.4 Hz, 1 H), 7.40 – 7.29 (m, J = 8.3 Hz, 2 H), 7.18 – 7.06 (m, 1 H), 6.85 (t, J = 8.6 Hz, 1 H), 6.48 (d, J = 5.4 Hz, 1 H), 6.03 (br. s., 1 H), 4.22 (d, J = 3.9 Hz, 3 H), 3.86 (s, 3 H), 3.76 (d, J = 4.9 Hz, 2 H), 1 .34 (d, J = 9.3 Hz, 4 H)

According to the analysis of related databases, 1014645-87-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ROTTAPHARM S.P.A.; BORRIELLO, Manuela; ROVATI, Lucio; STASI, Luigi Piero; BUZZI, Benedetta; COLACE, Fabrizio; WO2012/76063; (2012); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Application of 4897-84-1, A common heterocyclic compound, 4897-84-1, name is Methyl 4-bromobutanoate, molecular formula is C5H9BrO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of the methyl ester (XIV, 1.8 g, 0.15 mmol) in DMF (50 mL), is added 4-bromo-butyric acid methyl ester (1 g, 0.87 mmol) and Cs2CO3 (800 mg, 0.48 mmol). The reaction is stirred at 22° C. for 48 hours. 5 g SiO2 is added to the mixture and all solvents were evaporated in vacuo. The solid is purified by flash chromatography, eluting with MeOH/DCM (0-10percent) to provide 1.5 g (75percent), of a yellow solid. MS m/z 1357 (M +H2O).

The synthetic route of 4897-84-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bushell, Simon; LaMarche, Matthew J.; Leeds, Jennifer; Whitehead, Lewis; US2009/156628; (2009); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 63485-50-7, name is cis-Methyl 3-hydroxycyclobutanecarboxylate, A new synthetic method of this compound is introduced below., name: cis-Methyl 3-hydroxycyclobutanecarboxylate

cis-3-hydroxycyclobutylcarboxylic acid methyl ester (2730 g, 21.0 mol, 1.0 eq) prepared in Example 1 was dissolved in tetrahydrofuran (30 L) and cooled to -10 C.p-Nitrobenzoic acid (4178 g, 25.0 mol, 1.2 eq.), diethyl azodicarboxylate (4354 g, 25.0 mol, 1.2 eq.), triphenylphosphine (6557 g, 25.0 mol, 1.2 eq.).It was then stirred at room temperature for 16 h under nitrogen.The reaction was complete by TLC, the tetrahydrofuran was removed, and methyl t-butyl ether (20 L) was added and stirred for 0.5-1 h.Filter and filter cake was washed twice with methyl tert-butyl ether.All filtrates were collected and the filtrate was washed with saturated aqueous sodium bicarbonate.Dispense, dry and concentrate.The crude product was then beaten with a mixed solvent of ethyl acetate/petroleum ether, filtered and concentrated to give a pale yellow powder.Trans-III compound trans-p-nitrobenzoic acid (3-methoxycarbonylcyclobutyl) ester (4468 g, 16.0 mol), yield 76%, purity 95%.

The synthetic route of 63485-50-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Shanghai Bide Pharmaceutical Technology Co., Ltd.; Xiong Shichuan; Mi Taoran; Fan Jianjian; Zhang Ruihao; (9 pag.)CN108129288; (2018); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Reference of 28868-76-0, A common heterocyclic compound, 28868-76-0, name is Dimethyl 2-chloromalonate, molecular formula is C5H7ClO4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a suspension of K2CO3 (49.3 G) in acetone (100 ml) a solution of 2-chloro-5- methoxy-phenol (37.7 G, boiling point 83-86C, 13 mbar, [9]) was added dropwise at 40C. The dropwise addition of dimethyl CHLOROMALONATE (43.6 G) in acetone (100 ml) followed. The mixture was refluxed for 16 h before the solvent was removed under reduced pressure. The residue was taken up in water (400 ML) and extracted twice with DCM (400 ML). The organic extracts were dried over MGS04 and evaporated. Upon treatment of the oily residue with diethyl ether, the product crystallised. The crystals were collected, washed with a mixture of diethyl ether and hexane and dried to give 2- (2-chloro-5-methoxy-phenoxy)-malonic acid dimethyl ester (53.73 g) as white crystals. (CDC13) : 3.76 (s, 3H), 3.86 (s, 6H), 5.20 (s, 1 H), 6.53-6. 58 (m, 2H), 7.24-7. 29 (m, 1 H).

The synthetic route of 28868-76-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ACTELION PHARMACEUTICALS LTD; WO2004/50640; (2004); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

These common heterocyclic compound, 105-53-3, name is Diethyl malonate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 105-53-3

EXAMPLE 14: PREPARATION OF 1 ,1 CYCLOPRANEDIESTER (FORMULA XVI):1 ,2-dichloroethane (400 liters), diethyl malonate (145 kg), N,N-dimethyl formamide (365 liters), and potassium carbonate (187 kg) were taken into a reactor equipped with a Dean-Stark type azeoptropic apparatus. The reaction mixture was heated to reflux followed by stirring for about 30 hours, simultaneously removing unwanted water that was collected in the Dean Stark apparatus. The reaction mixture was cooled to about 30 0C. The reaction mass was filtered and the filter washed with 510 L of 1 ,2-dichloroethane. The obtained organic layer was washed with water (4*510 L water) and distilled completely under vacuum below 6O0C to obtain a residue. The obtained residue was cooled to 35 0C and high vacuum applied. The reaction mass was heated slowly below 75C and collect the first fraction. The second fraction was collected by maintaining the temperature at 900C and the third fraction was collected by maintaining the temperature below 120C for about 5 hours to afford 18.5 kg (2nd and 3rd fractions) of the title compound. Purity by GC: 92.44%.

The synthetic route of Diethyl malonate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; DR. REDDY’S LABORTORIES, LTD.; DR. REDDY’S LABORATORIES, INC.; WO2008/58118; (2008); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2876-78-0, name is Methyl 1-Naphthaleneacetate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. name: Methyl 1-Naphthaleneacetate

Methylmagnesium bromide (3 M in ether, 10 mL, 30 mmol) was added dropwise to a solution of methyl naphthalene-1-acetate (2.0 g, 10 mmol) in tetrahydrofuran (20 mL) at 0 C. under a nitrogen atmosphere. After stirring at room temperature overnight, the reaction mixtures was quenched by the addition of water. The organic fraction was washed with brine, dried over sodium sulfate and concentrated under vacuum to give crude 2-methyl-1-(naphthalene-1-yl)propan-2-ol (2.0 g) as a yellow oil, which was used directly in the next step.The crude alcohol (2.0 g, 10 mmol) was dissolved in acetonitrile (10 mL) and concentrated sulfuric acid (4.9 g, 50 mmol) was added dropwise at 0 C. After stirring at room temperature for 2 hours, the reaction mixture was diluted with water and extracted with dichloromethane. The combined organic fractions were dried over sodium sulfate and evaporated. The residue was purified by silical gel column chromatography (petroleum ether/ethyl acetate) to give N-(2-methyl-1-(naphthalene-1-yl)propan-2-yl)acetamide (0.90 g, 37% yield) as a yellow solid.Concentrated hydrochloric acid (10 mL) was added to a solution of the intermediate acetamide (0.20 g, 0.83 mmol) in dioxane (2 mL) and the resulting mixture was refluxed for 3 days. After cooling to room temperature, the reaction mixture was basified to pH 9 by the addition of solid sodium bicarbonate. The mixture was extracted with ethyl acetate and the combined organic fractions were dried over sodium sulfate and concentrated to give crude 2-methyl-1-(naphthalene-1-yl)propan-2-amine (0.15 g, 23% yield) as a yellow oil, which was used without further purification.The crude amine (153 mg, 0.25 mmol), compound 1 (48 mg, 0.13 mmol) and potassium carbonate (36 mg, 0.25 mmol) were taken up in dioxane (2 mL) and heated to reflux overnight. The reaction mixture was concentrated under vacuum and the residue was purified by prep-HPLC to give compound A27 (16 mg, 23% yield) as a white solid: >99.5% purity (HPLC); MS m/z: 530.3 (M+1); 1H NMR (CDCl3, 500 MHz) delta 8.29 (d, J=8.0 Hz, 1H), 8.15 (d, J=7.0 Hz, 1H), 7.88 (d, J=6.5 Hz, 2H), 7.77 (d, J=8.0 Hz, 1H), 7.56 (t, JHF=54.0 Hz, 1H), 7.48 (m, 2H), 7.39 (m, 3H), 7.27 (d, J=7.0 Hz, 1H), 5.29 (s, 1H), 4.02-3.73 (m, 8H), 3.66 (s, 2H), 1.54 (s, 6H) ppm

The synthetic route of 2876-78-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Pathway Therapeutics Inc.; US2012/252802; (2012); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics