Category: esters-buliding-blocks

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 18595-14-7, name is Methyl 4-amino-3-methylbenzoate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C9H11NO2

TEA (1.2 mmol) and the commercially available benzoyl chloride (1.1 mmol) wereadded at 000 to a solution of the corresponding aniline (1 mmol) in DCM (0.16M). The reaction mixture was left stirring at room temperature for 2h. Sat. solution of NaHCO3 (500m1) was added. The phases were separated and the aqueous layer was extracted with DCM (3 times). The combined organic layers were evaporated and purified by flash chromatography eluting with DCM/EtOAc to obtain the compounds of examples16-18,20,21 reported in Table 4.

The synthetic route of 18595-14-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ROTTAPHARM BIOTECH S.R.L.; ARTUSI, Roberto; CASELLI, Gianfranco; ROVATI, Lucio; (78 pag.)WO2016/146220; (2016); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Reference of 89-91-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 89-91-8 name is Methyl 2,2-dimethoxyacetate, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

STR12 A mixture of methyl dimethoxyacetate (1) (8 mL, 65.5 mmol), glyoxylic acid monohydrate (5.8 g, 63 mmol) and p-toluenesulfonic acid monohydrate (60 mg, 0.32 mmol) was heated at 80 C. for 18 h. The resulting solution was cooled to 0 C. and phosphorus pentoxide (7.0 g, 49.3 mmol) was added. After heating for 4 h at 80 C., methyl glyoxylate (2) (7.9 g, 90 mmol) was obtained by distillation in 70% yield.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Methyl 2,2-dimethoxyacetate, and friends who are interested can also refer to it.

Reference:
Patent; Akzo Nobel, N.V.; US6150548; (2000); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 51760-21-5, name is Dimethyl 5-bromoisophthalate, A new synthetic method of this compound is introduced below., Recommanded Product: 51760-21-5

Into a round-bottom flask were charged with dimethyl 5-bromoisophthalate (0.50 g, 1.8 mmol), barium hydroxide octahydrate (0.43 g, 1.4 mmol) and methanol (10 mL). The mixture was stirred at room temperature overnight. HCl (2 N ethyl ether solution, 10 mL) was added and the volatiles were removed under reduced pressure. The residue was purified via flash chromatography to afford the desired product as a white solid. 1H NMR (400 MHz, DMSO-d6): 13.70 (br, IH), 8.42 (t, J = 1.5 Hz, IH), 8.31- 8.24 (m, 2H), 3.90 (s, 3H).

The synthetic route of 51760-21-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; RENOVIS, INC.; WO2009/110985; (2009); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 29823-21-0, name is Ethyl 8-Bromooctanoate, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C10H19BrO2

a) 4,5-Bis(4-methoxyphenyl)-2-phenylimidazole (7 g) (J. Med. Chem., 1974, 17, 1182-8) and ethyl 8-bromo-octanoate (9.9 g) were reacted in a method similar to Example 9. Column chromatography on silica gel eluted with a hexane:ethyl acetate gradient gave 1-(7-ethoxy-carbonylheptyl)-4,5-bis(4-methoxyphenyl)-2-phenyl-imidazole (10.3 g, 100%) as an oil. NMR d (CDCl3) 0.8-1.5 (13H, m, 5*CH2, CH3), 2.18 (2H, t, CH2 =O), 3.75 (3H, s, OCH3), 3.88 (5H, m, NCH2, OCH3), 4.1 (2H, q, CH2 OC=O), 6.7-7.7 (13H, m, ArH) ppm.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 29823-21-0.

Reference:
Patent; SmithKline Beecham Corporation; The Johns Hopkins University; US5648373; (1997); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Electric Literature of 581065-95-4, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 581065-95-4, name is tert-Butyl 1-amino-3,6,9,12-tetraoxapentadecan-15-oate, This compound has unique chemical properties. The synthetic route is as follows.

Example 9: Preparation of Compounds 10a and 10b [00172] Compound 8 (1.0 g, 1.97 mmol) was dissolved in DMF (25 mL) and Et3N (1.37 mL, 9.87 mmol) and cooled to 0 C. Then TSTU (593 mg, 1.97 mmol) was added and the reaction was stirred at 0 C for 30 minutes. A solution of the appropriate pegylated amine (2.07 mmol) in chloroform (10 mL) was added dropwise at 0 C and the reaction was allowed to warm to room temperature and stir for 12 hours. The reaction was concentrated and the -Bu ester of lOa/lOb was purified by silica gel chromatography (acetonitrile/methanol). The purified -Bu ester of lOa/lOb was dissolved in dichloro methane (20 mL) and TFA (5 mL) was added at 0 C. The reaction was stirred at room temperature overnight. The reaction was concentrated and dried under reduced pressure to give pure lOa/lOb.

The chemical industry reduces the impact on the environment during synthesis tert-Butyl 1-amino-3,6,9,12-tetraoxapentadecan-15-oate. I believe this compound will play a more active role in future production and life.

Reference:
Patent; BIOTIUM, INC.; MAO, Fei; MCGARRAUGH, Patrick, Gordon; MADRID, Alexis, Spain; LEUNG, Wai-Yee; ROBERTS, Lori, M.; (104 pag.)WO2016/69922; (2016); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Synthetic Route of 39552-81-3, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 39552-81-3 as follows.

EXAMPLE 3 N-(4-Methoxycarbonylmethylphenyl)-L-glutamine: Compound (3) Following the procedure described in (a) of Example 1, 11.14 g (0.03 mole) of N-carbobenzoxy-L-glutamic acid alpha-benzyl ester was reacted with 4.96 g (0.03 mole) of methyl p-aminophenylacetate to give 13.38 g (88% yield) of an intermediate. The intermediate was dissolved in 500 ml of tetrahydrofuran, 200 ml of methanol and 100 ml of water. To the solution was added 0.5 g of palladium black and the mixture was subjected to hydrogenation at atmospheric pressure to give 6.09 g (79% yield) of N-(4-methoxycarbonylmethylphenyl)-L-glutamine, m.p. 183.3-184.2 C. [alpha]D25 =+29.2 (c=1 2 N HCl)

According to the analysis of related databases, 39552-81-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Mitsubishi Chemical Industries Ltd.; Nippon Shinyaku Co., Ltd.; US4439448; (1984); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Some common heterocyclic compound, 14920-81-1, name is Methyl 2,6-dimethylbenzoate, molecular formula is C10H12O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C10H12O2

General procedure: To a flame-dried 250 mL round-bottom flask under argon wereadded 4 (8.02 g, 28.4 mmol, 1 equiv), TMEDA (8.71 mL, 58.2mmol, 2.05 equiv), and anhydrous n-hexane (28 mL). Theresulting solution was cooled in an ice bath and sec-butyllithium(1.4 M solution in cyclohexane, 42.0 mL, 58.2 mmol, 2.05equiv) was added dropwise. The ice bath was removed and thereaction mixture was stirred at room temperature for 4 h. Thereaction was cooled to -78 C and a solution of methyl 2,4,6-trimethylbenzoate (5.11 g, 28.7 mmol, 1.01 equiv) in anhydrousn-hexane (28 mL) was added slowly via cannula. After the addition,the mixture was allowed to slowly warm to room temperatureand stirred for 12 h. The reaction was quenched with water(25 mL) and the biphasic mixture was stirred vigorously for 30min. The mixture was diluted with Et2O (100 mL) and the layerswere separated. The organic layer was washed with water(2 × 150 mL) and brine (1 × 150 mL). The organic layer wastransferred to a 250 mL round-bottom flask equipped with astir bar. To the vigorously stirred solution was added conc. HCl(12 mL), resulting in a bright-yellow precipitate. The suspensionwas stirred vigorously for 30 min then diluted with water (150mL). The layers were separated and the organic layer wasextracted with water (3 × 150 mL or until the washings becomecolorless). To the combined aqueous layers was added solidNaBF4 (9.35 g, 85.2 mmol, 3 equiv), resulting in a bright-yellowprecipitate. The resulting suspension was extracted withdichloromethane (3 × 150 mL or until the washings become colorless).To the combined organic layers was added HBF4·Et2Ocomplex (3.46 mL, 28.4 mmol, 1 equiv). The solution wasswirled to achieve homogeneity then washed with water(1 × 100 mL) and aq. NaBF4 (1 M, 1 × 100 mL). The organic layerwas dried over solid NaBF4, filtered, and concentrated to dryness.The residue was purified by trituration with hexanes andfiltered. The solid was rinsed with n-pentane and dried in vacuoto give xanthylium 3 (10.6 g, 21.3 mmol, 75% yield) as a yelloworangesolid.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 14920-81-1, its application will become more common.

Reference:
Article; White, Alexander R.; Wang, Leifeng; Nicewicz, David A.; Synlett; vol. 30; 7; (2019); p. 827 – 832;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 2967-93-3 as follows. category: esters-buliding-blocks

Step 2; Preparation of 2-Fluoro-5-formyl-benzoic acid methyl ester; Add Af-bromosuccinimide (2.46 g, 13.86 mmol) and benzoyl peroxide (0.152 g, 0.630mmol) to a solution of 2-fluoro-5-methyl-benzoic acid methyl ester (1.06 g, 6.30 mmol)in carbon tetrachloride (50 mL). Heat the mixture at reflux for 4 h. Cool the mixture toroom temperature and wash with saturated aqueous sodium bicarbonate solution (10 mL)and brine (10 mL). Dry the organic layer over anhydrous sodium sulfate, filter, andconcentrate under reduced pressure. Dissolve the resulting residue in dimethylsulfoxide(30 mL) and heat at reflux for 16 h. Cool the mixture to room temperature and dilutewith water (100 mL) and ethyl acetate (100 mL). Extract the aqueous layer with ethylacetate (3 x 100 mL). Wash the combined organic layers with water (3 x 100 mL),followed by brine (100 mL). Dry the organic layer over anhydrous sodium sulfate, filterand concentrate. Purify the residue by chromatography over silica gel, eluting withhexanes/ethyl acetate (80:20), to provide the title compound as a tan solid (0.228 g, 20%).

According to the analysis of related databases, 2967-93-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ELI LILLY AND COMPANY; WO2006/2342; (2006); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 61644-18-6, name is Chloromethyl isobutyrate, A new synthetic method of this compound is introduced below., Recommanded Product: 61644-18-6

General procedure: To a solution of Compound 54B (150 mg, 0.24 mmol) in DMF (10 mL) was added chloromethyl isobutyrate (36 mg, 0.24 mmol) and Na2CO3 (50 mg, 0.48 mmol). The reaction mixture was stirred at 50 C for 3 hour. After cooling down to room temperature, the mixture was diluted with water (50 mL) and extracted with ethyl acetate (20 mL x 3). The combined extracts were washed with brine (50 mL), dried over anhydrous sodium sulfate, filtered, and concentrated to furnish Compound 54C. LC-MS (ESI) m/z: non-ionizable compound under routine conditions used.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; BIOMARIN PHARMACEUTICAL INC.; WANG, Bing; CHAO, Qi; (737 pag.)WO2019/133770; (2019); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 99974-66-0, name is Diethyl 3-hydroxycyclobutane-1,1-dicarboxylate, A new synthetic method of this compound is introduced below., name: Diethyl 3-hydroxycyclobutane-1,1-dicarboxylate

A solution of alcohol Id (3.0 g) in 200 mL of dichloromethane was treated with Dess-Martin periodinane (1.2 eq, 7.06 g). The mixture was stirred for 2 h at room temp. The reaction was quenched by addition of aq saturated sodium thiosulfate soln (100 mL). The mixture was stirred for 20 min followed by addition of aq saturated sodium bicarbonate soln (100 mL). The mixture was further stirred for 20 min and extracted with ethyl acetate (500 mL). The aqueous layer was back extracted with ethyl acetate (250 mL). The combined organic layers were washed with aq saturated sodium bicarbonate (2 x 80 mL) and brine (80 mL). The organic layer was dried over magnesium sulfate, filtered and concentrated in rotavap. The product was purified on silica gel (Biotage75-M column; gradient: 0 to 30% ethyl acetate in hexanes) to afford the product (5.14 g; 96 %) as a colorless oil.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SCHERING CORPORATION; WO2009/8913; (2009); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics