Category: esters-buliding-blocks

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 42726-73-8, name is tert-Butyl methyl malonate, A new synthetic method of this compound is introduced below., COA of Formula: C8H14O4

Examples 1-9 demonstrate the ability to achieve consistent enantiomeric excess in the malonate/nitrostyrene reaction and that the absolute configuration of the product depends only on allosteric consequences of the oxidation state (and thus the propeller helicity of the ligand) and not on counter ion, solvent, concentration, loading, or base. The ability of Delta/Lambda-1 to catalyze the Michael addition of other nitrostyrenes and dimalonate esters was evaluated. All reactions were carried out using the indicated dimalonate ester (0.67 mmol, 2 equiv), the indicated nitrostyrene (0.34 mmol, 1 equiv), and NEt3 (10 mol percent) in MeCN (1 mL) with 5 mol percent catalyst Delta-1 or Lambda-1) at room temperature for 24 hours. The results are shown in Tables 5 and 6 below.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; NEW YORK UNIVERSITY; Canary, James; Mortezaei, Shahab; US2015/112066; (2015); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 106896-49-5, name is Methyl 4-amino-3-bromobenzoate, A new synthetic method of this compound is introduced below., Formula: C8H8BrNO2

To a 250 mL round-bottom flask was added methyl 4-amino-3-bromobenzoate 32a (2.4 g, 10.43 mmol, 1.00 equiv.), 2-(3,6-dihydro-2H-pyran-4-yl)-4,4,5,5-tetramethyl-l,3,2- dioxaborolane (2.6 g, 12.38 mmol, 1.20 equiv.), dioxane (100 mL), aq. sodium bicarbonate (37 mL, 3.50 equiv, 1M), and Pd(PPh3)4 (1.21 g, 1.05 mmol, 0.10 equiv.). The resulting mixture was heated at 100C overnight. After cooling to room temperature, the mixture was diluted with 300 mL of EA and washed with brine (200 mL x 2). The organic phase was dried over anhydrous sodium sulfate and concentrated under vacuum. The crude product was purified by Flash-Prep- HPLC using the following conditions (IntelFlash-1): Column, silica gel; mobile phase, PE_EA=100:0 increasing to PE_EA=50:50 within 30 min; Detector, UV 254 nm. Removal of solvents afforded methyl 4-amino-3-(3,6-dihydro-2H-pyran-4-yl)benzoate 32b (2.4 g, 99% as a white solid.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ARDELYX, INC.; CHAO, Jianhua; (231 pag.)WO2019/55808; (2019); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 79669-50-4, name is methyl 5-bromo-2-methyl-benzoate, This compound has unique chemical properties. The synthetic route is as follows., name: methyl 5-bromo-2-methyl-benzoate

Place 5-bromo-2-methyl-benzoic acid (1.0 g, 4.7 mmol) in a 200 mL flask under an N2 atmosphere and add methanol via syringe. Add a 2M solution of diazomethyl- trimethyl-silane in hexane (3.5 mL, 23.0 mmol) drop wise over 10 minutes and stir for 1 hour at room temperature. Add glacial acetic acid (16 mL) and stir for 45 minutes. Dilute with ethyl acetate (100 mL) and wash with 1M aqueous sodium hydroxide solution (30 mL), saturated aqueous sodium bicarbonate solution (30 mL) and brine (30 mL). Dry the organic layer (Na2SO4), filter and concentrate in vacuo to obtain 1.01 g of 5-bromo-2- methyl-benzoic acid methyl ester (99 %). Place 5-bromo-2-methyl-benzoic acid methyl ester (1.04 g, 4.5 mmol) in a 50 mL flask under a N2 atmosphere and add carbon tetrachloride (15 mL). Add N-bromo- succinamide (1.49 g, 8.3 mmol) and 2,2′-azobisisobutyronitrile (40 mg, 0.2 mmol) and fit flask with a condenser and reflux for 4 hours. Cool to room temperature and filter. Concentrate the filtrate and pre-adsorb the crude product onto silica gel. Chromatograph the residue on a Si02 column eluting with dichloromethane in hexane (0 to 50%) to obtain 977 mg of 5-bromo-2-bromomethyl-benzoic acid methyl ester (70%). Using 5-bromo-2-bromomethyl-benzoic acid methyl ester (0. 984 g, 3.20 mmol) and the procedure described in the I st paragraph for the alternative procedure for 5- (4,4, 5, 5-tetramethyl- [1, 3,2] dioxaborolan-2-yl) -2, 3-dihydro-isoindol-1-one, prepare 509 mg of the title compound (75 %).

According to the analysis of related databases, 79669-50-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ELI LILLY AND COMPANY; WO2005/73205; (2005); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Some common heterocyclic compound, 82702-31-6, name is Methyl 3-bromo-4-fluorobenzoate, molecular formula is C8H6BrFO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C8H6BrFO2

To methyl 3-bromo-4-fluorobenzoate (3.02 g, 13.0 mmol) in ether (30 ml) at 0 C. add dropwise MeMgBr (3.0M in ether, 11 ml, 33 mmol). Stir 1 h and pour onto ice. Acidify with 1N HCl, separate the ether, wash with 1N NaHCO3, dry (MgSO4), and concentrate to obtain the product as a colorless oil.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 82702-31-6, its application will become more common.

Reference:
Patent; Schering Corporation; US2005/239795; (2005); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Application of 454-31-9,Some common heterocyclic compound, 454-31-9, name is Ethyl 2,2-difluoroacetate, molecular formula is C4H6F2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 2 Preparation of 4,4-difluoro-1-(3-fluoro-4-methoxyphenyl)-butane-1,3-dione Ethyl difluoroacetate (4.06 g, 32.7 mmol) was dissolved in methyl tert-butyl ether (50 mL). To the stirred solution was added 25 weight % sodium methoxide (7.07 g, 32.7 mmol) followed by 3′-fluoro-4′-methoxyacetophenone from Step 1 (5.0 g, 29.7 mmol). After stirring for 16 hours, 1N HCl (50 mL) was added. The organic layer was collected and washed with water (2*50 mL), dried over anhydrous MgSO4, filtered, and added to hexanes to precipitate a tan solid (7.0 g, 96%): mp 70-72 C.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Ethyl 2,2-difluoroacetate, its application will become more common.

Reference:
Patent; G. D. Searle & Co.; US6376528; (2002); B1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Synthetic Route of 2495-35-4,Some common heterocyclic compound, 2495-35-4, name is Benzyl acrylate, molecular formula is C10H10O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: The catalyst precursor in form of a 0.04 M CuSO4 and 0.004 M CoCl2 solution was added to a solution of the alkene/alkyne compound in methanol. The reaction was started by adding an initial portion of NaBH4, resulting in a color change to black (in situ prepared catalyst) and vigorous gas evolution. Additional portions of NaBH4 were added in intervals of typically three or four minutes. The reaction itself was carried out at room temperature and normal atmosphere. However, generation of heat due to the exothermic character of the reaction usually heated the reaction mixture to 30-40 C. Cooling is generally not necessary in small scale. For large scale reactions a reflux condenser was used. The higher reaction temperature did not influence the reaction yield. The reaction mixture was finally quenched by adding 2 M H2SO4. Work up was carried out by extracting the water/methanol phase with DCM. The catalyst in general stays within the water/methanol layer. Drying the DCM layer with MgSO4 followed by filtration removes all remaining catalyst particles. The drying agent was filtered of and the DCM was removed in vacuo.

The synthetic route of 2495-35-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Ficker, Mario; Svenningsen, S°ren W.; Larribeau, Thomas; Christensen, J°rn B.; Tetrahedron Letters; vol. 59; 12; (2018); p. 1125 – 1129;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Electric Literature of 15963-46-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 15963-46-9, name is Methyl 3-chlorocyclobutanecarboxylate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

To a solution of 4-(1-(pentan-3-yl)-1H-pyrazol-4-yl)-6-(1H-pyrazol-4-yl)pyrazolo[1,5-a]pyrazine (0.100 g, 0.311 mmol) and methyl 3-chlorocyclobutanecarboxylate (0.0925 g, 0.622 mmol) in DMF (1.56 mE, 0.311 mmol) was added cesium carbonate (0.203 g, 0.622 mmol) and the reaction mixture was stirred at 80 C for 5 hours. The reaction mixture was cooled to ambient temperature, diluted with water (15 mE) and stirred for 10 minutes. The reaction mixture was extracted with EtOAc and the combined extracts were washed with brine, dried over Na2SO4, filtered and concentrated. The residue was purified over silica gel (50% EtOAc/hexanes) to afford two isomers. Faster eluting peak: trans-methyl 3-(4-(4-(1-(pentan- 3 -yl)- 1 H-pyrazol-4-yl)pyrazolo [1 ,5-ajpyrazin-6-yl)- I H-pyrazol- 1 -yl)cyclobutanecarboxylate(28 mg, 21% yield) as an off-white foam. Slower eluting peak: cis-methyl 3-(4-(4-(1-(pentan- 3-yl)-l H-pyrazol-4-yl)pyrazolo [1 ,5-a]pyrazin-6-yl)- 1 H-pyrazol- 1 -yl)cyclobutanecarboxylate(58mg, 43% yield) as a thick oil.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 3-chlorocyclobutanecarboxylate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ARRAY BIOPHARMA INC.; CELGENE CORPORATION; ALLEN, Shelley; BOYS, Mark Laurence; CHICARELLI, Mark J.; FELL, Jay Bradford; FISCHER, John P.; GAUDINO, John; HICKEN, Erik James; HINKLIN, Ronald Jay; KRASER, Christopher F.; LAIRD, Ellen; ROBINSON, John E.; TANG, Tony P.; BURGESS, Laurence E.; RIEGER, Robert Andrew; PHENEGER, Jed; SATOH, Yoshitaka; LEFTHERIS, Katerina; RAHEJA, Raj K.; BENNETT, Brydon L.; (223 pag.)WO2016/90285; (2016); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

A common compound: 1559-02-0, name is Diethyl 1,1-cyclopropanedicarboxylate, belongs to esters-buliding-blocks compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below. 1559-02-0

Example 91 2″-amino-6′-(5-chloropyrid-3-yl)-l”-methyldispiro[cyclopropane-l,3′-chroman-4′,4″- imidazol]-5′(l’H)-oneStep A: A mixture of diethyl cyclopropane-l,l-dicarboxylate (14.1 mL, 80.6 mmol) and lithium tri-tert- butoxyaluminohydride (201.4 mL, 201.4 mmol) was heated to reflux in THF for 3 hours. The mixture was cooled down and partitioned between water and EtOAc. The organics were washed with water, brine and dried with Na2S04. This was concentrated down and then purified on a column using 10 to 50% EtOAc:hexanes to give ethyl l-(hydroxymethyl)cyclopropanecarboxylate (1.5 g, 10.4 mmol, 12.9%) as an 12.9%) as an oil.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1559-02-0, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ARRAY BIOPHARMA INC.; HUNT, Kevin, W.; RIZZI, James, P.; COOK, Adam; WO2011/72064; (2011); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Application of 706791-83-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 706791-83-5 name is Methyl 3-amino-5-bromobenzoate, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

To a solution of methyl 3-amino-5-bromobenzoate (61b, 219 mg, 0.950 mmol) in 1,4-dioxane (20 mL) were added bis(pinacolato)diboron (290 mg, 1.14 mmol), PdCl2(dppf) (23 mg, 28.5 pmol) and potassium acetate (279 mg, 2.85 mmol), and then this reaction mixture was stirred at 95 C for 15 h. The reaction mixture was partitioned ethyl acetate (20 mL) and water (10 mL), and the aqueous layer was extracted with ethyl acetate (10 mL x 2). The combined organic layer was washed brine (5 mL), dried over MgS04, filtered and evaporated under reduced pressure. The residue was purified by silica gel column chromatography (hexane:ethyl acetate=4: l) to afford compound 62 (180 mg, 68%) as a white solid; NMR (400 MHz, CDC13) d 7.88 (s, 1H), 7.46 (s, 1H), 7.31 (d, J =2.4 Hz, 1H), 3.91 (s, 3H), 1.36 (s, 12H); MS (ESI, m/z) 278.2 [M+l]+; ESI-HRMS calcd. m/z for (0572) Ci4H2iN04nB 278.1564, found 278.1565 [M+l]+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Methyl 3-amino-5-bromobenzoate, and friends who are interested can also refer to it.

Reference:
Patent; THE UNITED STATES OF AMERICA, AS REPRESENTED BY THE SECRETARY, DEPARTMENT OF HEALTH AND HUMAN SERVICES; JACOBSON, Kenneth A.; YU, Jinha; CIANCETTA, Antonella; WEN, Zhiwei; JUNG, Young-Hwan; (124 pag.)WO2019/157417; (2019); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 52787-14-1, name is Methyl 4-(2-methoxy-2-oxoethyl)benzoate, A new synthetic method of this compound is introduced below., Computed Properties of C11H12O4

Under argon protection, 323g of PLQS-1 and 2.26L of THF were added to a 5L three-necked flask. When the temperature was lowered to -10C, 224ml of 3-bromopropyne was poured into the reaction flask, and the temperature was stirred for 0.5h to start dropping. 1.8L 1mol/L. LiHMDS solution in THF, control the dropping rate, and keep the reaction temperature at -10±3C (about 2~3h). After completion of the addition, stirring was continued for 0.5 h. HPLC detection was completed. After the reaction was completed, the reaction solution was poured into 1.25 L of acetic acid aqueous solution, stirred for 10 minutes, and then liquid-separated. The organic phase was concentrated under reduced pressure at 50 C. to remove the solvent, and the solution was concentrated. About 1.3L of isopropanol was added, and the precipitated solid was stirred and put into 0 to 5C.Cold bathThe mixture was stirred for 3 to 4 hours, filtered, and the filter cake was washed with about 300 ml of a mixed solvent of isopropanol:n-heptane = 1:6. The filter cake was dried in an oven at 50 C. to give 332 g of a pale yellow solid with a yield of 87.0%. The intermediate alpha-propargyl-(4-Methyl formate)-methyl phenylacetate (PLQS-2)The HPLC assay content is 99.6%.The HPLC content of the dipropargyl substituent was 0.3%.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Shandong New Age Pharmaceutical Co., Ltd.; Zhang Guimin; Chen Chengfu; Wei Chuanbing; (7 pag.)CN107488112; (2017); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics