Category: esters-buliding-blocks

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 816-27-3, name is Ethyl 2-ethoxy-2-iminoacetate, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C6H11NO3

To a solution of cyclopropanecarbohydrazide (6.9 g, 69 mmol, 1 equiv) in ethanol (20mL) was added ethyl 2-ethoxy-2-iminoacetate (10 g, 69 mmol, 1 equiv). The mixture was stirred at 40C overnight. The resulting solid was filtered and the filter cake was washed with cool ethanol to afford ethyl 2-(2-(cyclopropanecarbonyl)hydrazinyl)-2- iminoacetate as a white solid, which was used for next step without further purification(5.8 g, 42.7% yield). LC-MS: m/z 200.1 (M+H) +

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 816-27-3.

Reference:
Patent; ANNAPURNA BIO INC.; TANG, Haifeng; BOYCE, Sarah; HANSON, Michael; NIE, Zhe; (213 pag.)WO2019/169193; (2019); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 15448-76-7, name is Dimethyl bicyclo[2.2.1]heptane-1,4-dicarboxylate, A new synthetic method of this compound is introduced below., Recommanded Product: Dimethyl bicyclo[2.2.1]heptane-1,4-dicarboxylate

A solution of dimethyl bicyclo [2.2.1] heptane-1, 4-dicarboxylate (500 mg, 2.356 mmol) and LiOH (169 mg, 7.07 mmol) in water (20 mL) and MeOH (10 mL) was stirred at RT for 48 hours. The solution was poured into 1 N HCl and extracted with EtOAc. The combined organic was dried over Na2SO4and concentrated in vacuo to give crude title compound.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; MERCK SHARP & DOHME CORP.; LIU, Jian; KOZLOWSKI, Joseph A.; ALHASSAN, Abdul-Basit; BOGA, Sobhana Babu; GAO, Xiaolei; GUIADEEN, Deodialsingh; WANG, Jyhshing; YU, Wensheng; CAI, Jiaqiang; LIU, Shilan; WANG, Dahai; WU, Hao; YANG, Chundao; (260 pag.)WO2016/106623; (2016); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Synthetic Route of 110661-91-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 110661-91-1, name is tert-Butyl 4-bromobutanoate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

To a solution of ethyl 1-(2-chlorophenyl)-5-(4-chlorophenyl)-4-hydroxy-1H-pyrazole-3-carboxylate (20 g, 53 mmol) in DMF (100 mL) at 0 C. was added KOtBu (7.73 g, 69 mmol). The mixture was stirred at 0 C. for 45 minutes, then tert.-butyl 4-bromobutanoate (15.4 g, 69 mmol) was added at 0 C. The reaction mixture was allowed to warm to room temperature and stir overnight. The mixture was portioned between ether and saturated aqueous NH4Cl. The organic solution was washed with water and saturated aqueous NaCl, dried over Na2SO4, and concentrated in vacuo. The residue was taken into hot cyclohexane. The mixture was allowed to stand for 72 hours. The solvent was decanted and the residue was washed with cold cyclohexane. The solid was then dried under high vacuum to yield 4-(3-tert.-butoxycarbonyl-propoxy)-1-(2-chloro-phenyl)-5-(4-chloro-phenyl)-1H-pyrazole-3-carboxylic acid ethyl ester (I-1a: 20.8 g). 1H NMR (400 MHz, CHLOROFORM-D) ppm 1.4 (s, 9H), 1.4 (t, J=7.1 Hz, 3H), 1.9 (m, 2H), 2.3 (t, J=7.5 Hz, 2H), 4.0 (t, J=5.9 Hz, 2H), 4.4 (q, J=7.1 Hz, 2H), 7.2 (m, 2H), 7.2 (m, 2H), 7.4 (m, 3H), 7.5 (m, 1H); m/z=519.0 (M+1).

The synthetic route of tert-Butyl 4-bromobutanoate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Pfizer Inc; US2006/241100; (2006); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Application of 150529-73-0, The chemical industry reduces the impact on the environment during synthesis 150529-73-0, name is Methyl 2-(3-bromophenyl)acetate, I believe this compound will play a more active role in future production and life.

Step 2: [00153] To a solution of the ester (6.0 g, 26.2 mmol) in tert-butanol (24 ml_) was added, under nitrogen atmosphere, sodium iodide (7.8 g, 52.4 mmol), N1N’- dimethylethylenediamine (0.3 ml_, 2.6 mmol) and copper iodide (0.3 g, 1.3 mmol). The reaction mixture was heated in a microwave apparatus at 145C for 1 h. Water (100 mL) was added and the product was extracted with ethyl acetate (3 x 50 mL). The organic layer was dried over sodium sulfate and concentrated. The residue was purified by flash chromatography on silica gel with a mixture of hexanes/ethyl acetate (8:2). This gave 3- iodophenylacetic acid methyl ester as a colorless oil (6.6 g, 86%). 1H NMR (400 MHz, CDCI3): d = 7.63 (m, 1 H), 7.58-7.61 (m, 1 H)1 7.23-7.26 (m, 1 H)1 7.05 (dd, J = 7.8 Hz, 1 H), 3.69 (s, 3H), 3.56 (s, 2H); LRMS (ESI): m/z = 277 (MH+).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 2-(3-bromophenyl)acetate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; PROMETIC BIOSCIENCES INC.; ZACHARIE, Boulos; PENNEY, Christopher; GAGNON, Lyne; BIENVENU, Jean-Francois; PERRON, Valerie; GROUIX, Brigitte; WO2010/127440; (2010); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 924-99-2, name is Ethyl 3-(dimethylamino)acrylate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: Ethyl 3-(dimethylamino)acrylate

b) Ethyl 3-(dimethylamino)-2-(2-fluoro-4-acetoxybenzoyl)-2-propenoate A stirred solution of Intermediate 12a (4.91 g) in DCM (80 mL) was treated with oxalyl chloride (3.25 mL) and dimethylformamide (2 drops). After 2 h the clear solution was evaporated and re-evaporated from DCM (2x). The acid chloride was re-dissolved in toluene (100 mL) and treated with triethylamine (5.17 mL) and ethyl 3- (dimethylamino)acrylate (4.13 g). After stirring for 2 h at 9O0C the mixture was cooled, filtered and the solution flash chromatographed (silica gel 40 to 100% EtOAc in petroleum ether [b.p. 40-600C]) to give the title compound as a white solid (4.3 g); APCI m/z 324.0 [M+H]+.

The synthetic route of 924-99-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GLAXO GROUP LIMITED; PLIVA-ISTRAZIVACKI INSTITUT D.O.O.; WO2006/50942; (2006); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Application of 50413-30-4,Some common heterocyclic compound, 50413-30-4, name is Methyl 2-amino-4-methoxylbenzoate, molecular formula is C9H11NO3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Referential Example 23 3.1 mL of triethylamine and 1.3 mL of benzoyl chloride were added to 19 mL of methylene chloride solution containing 1.9 g of methyl 2-amino-4-methoxybenzoate while ice-cooled sequentially and stirred at room temperature for 3 hours. The solvent was evaporated under reduced pressure and chloroform and 1.0 mol/L hydrochloric acid were added to the obtained residue. The organic layer was separated and dried over anhydrous magnesium sulfate after washed with a saturated sodium hydrogen carbonate aqueous solution and a saturated sodium chloride aqueous solution sequentially, and the solvent was evaporated under reduced pressure. Hexane and diisopropyl ether were added to the obtained residue and a solid substance was separated by filtration to obtain 2.6 g of methyl 2-(benzamido)-4-methoxybenzoate as white solid. 1H-NMR (CDCl3) delta: 3.92 (3H, s), 3.93 (3H, s), 6.65 (1H, dd, J = 9.0, 2.7 Hz), 7.51-7.59 (3H, m), 8.00 (1H, d, H = 9.0 Hz), 8.05-8.07 (2H, m), 8.63 (1H, d, J = 2.7 Hz).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Methyl 2-amino-4-methoxylbenzoate, its application will become more common.

Reference:
Patent; TOYAMA CHEMICAL CO., LTD.; EP1820795; (2007); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 29823-21-0, name is Ethyl 8-Bromooctanoate, A new synthetic method of this compound is introduced below., HPLC of Formula: C10H19BrO2

1h: Preparation of Compound 8 A 3-neck 300 mL round-bottomed flask equipped with a reflux condenser, magnetic stir bar and a nitrogen inlet was charged with 5 g (1 equivalent) of 4-hydroxybenzonitrile, absolute ethanol 150 mL, and 15.7 mL (1 equivalent) of sodium ethoxide. This mixture was stirred at 25 C. for 15 minutes. Ethyl 8-bromooctanoate (10.5 g, 1 equivalent) was then added dropwise over 10 minutes. The resulting mixture was heated to reflux (75 C.) for 72 hours. The reaction mixture was cooled and the solids filtered off. The solvent was removed on a rotary evaporator. The crude residue was dissolved in methylene chloride (200 mL) and washed with saturated NaHCO3 (2*75 mL), H2O (1*100 mL) and brine (1*100 mL). The crude material was then dissolved in ethanol (125 mL) and water (10 mL). LiOH (5 g) was added and the resulting mixture was heated to reflux (75 C.) for 1 hour then stirred at ambient temperature overnight. The solvent was evaporated and 75 mL of H2O was added. The aqueous solution was acidified to a pH of about 3 with concentrated HCl and the flask cooled to 4 C. An off-white colored solid precipitated. This material was collected by vacuum filtration and dried on the high vacuum overnight to give the crude acid. These solids were further purified by recrystallization from Ethyl acetate/hexanes (95/5) and again with chloroform to give 4.5 g of the product, 8-(4-cyanophenoxy)octanoic acid (41% yield). Melting point: 137-140 C. Molecular Formula: C15H19NO3. Combustion analysis: %C: 68.94 (calc’d), 68.57 (found); %H: 7.33(calc’d), 7.13(found); %N: 5.36 (calc’d), 5.28 (found).

The synthetic route of 29823-21-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Moye-Sherman, Destardi; Gschneidner, David; US2003/199427; (2003); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Electric Literature of 75567-84-9, A common heterocyclic compound, 75567-84-9, name is Methyl 3-(4-bromophenyl)propanoate, molecular formula is C10H11BrO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a flask were added compound 50-6 (1.0 g, 3.5 mmol, the mixture of two trans isomers) , methyl 3- (4-bromophenyl) propionate (1.3 g, 5.3 mmol) , palladium acetate (100 mg, 0.445 mmol) , t-BuXPhos (300 mg, 0.63 mmol) , cesium carbonate (2.0 g, 6.1 mmol) and 1, 4-dioxane (10 mL) , the mixture was stirred at 90 for 3 hours and concentrated. The obtained residue was purified by silica gel column chromatography (PE/EA (V/V) = 1/1) to give the title compound as a white solid (1.0 g, 64%) . MS (ESI, pos. ion) m/z: 470.2 [M+Na] +.

The synthetic route of 75567-84-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SUNSHINE LAKE PHARMA CO., LTD.; LIU, Xinchang; REN, Qingyun; YAN, Guanghua; GOLDMANN, Siegfried; ZHANG, Yingjun; (253 pag.)WO2019/76310; (2019); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Application of 58656-98-7, These common heterocyclic compound, 58656-98-7, name is tert-Butyl 4-fluorobenzoate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

tert-butyl 4-(4-hydroxy-4-phenylpiperidin-1-yl)benzoate A solution of 4-hydroxy-4-phenyl piperidine (221 mg, 1.25 mmol) in DMSO (1 mL) was treated with tert-butyl-4-fluorobenzoate (196 mg, 1.00 mmol) and powdered potassium carbonate (173 mg, 1.25 mmol), stirred vigorously at 125 C. for 16 hours, cooled to room temperature, diluted with diethyl ether, washed with brine, dried (MgSO4), filtered, and concentrated to provide the desired product. MS (DCI(+)) m/e 354 (M+H)+.

Statistics shows that tert-Butyl 4-fluorobenzoate is playing an increasingly important role. we look forward to future research findings about 58656-98-7.

Reference:
Patent; Augeri, David J.; Baumeister, Steven A.; Bruncko, Milan; Dickman, Daniel A.; Ding, Hong; Dinges, Jurgen; Fesik, Stephen W.; Hajduk, Philip J.; Kunzer, Aaron R.; McClellan, William; Nettesheim, David G.; Oost, Thorsten; Petros, Andrew M.; Rosenberg, Saul H.; Shen, Wang; Thomas, Sheela A.; Wang, Xilu; Wendt, Michael D.; US2002/55631; (2002); A1;; ; Patent; Augeri, David J.; Baumeister, Steven A.; Bruncko, Milan; Dickman, Daniel A.; Ding, Hong; Dinges, Jurgen; Fesik, Stephen W.; Hajduk, Philip J.; Kunzer, Aaron R.; McClellan, William; Nettesheim, David G.; Oost, Thorsten; Petros, Andrew M.; Rosenberg, Saul H.; Shen, Wang; Thomas, Sheela A.; Wang, Xilu; Wendt, Michael D.; US2002/86887; (2002); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

541-16-2, name is Di-tert-Butyl malonate, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Computed Properties of C11H20O4

Di-tert-butyl malonate (33.5 mL, 150 mmol) was added dropwise to a stirred suspension of NaH (6.0 g, 60 % suspension in oil, 150 mmol) in 1,2-dimethoxyethane (100 mL) under Ar, cooled in a water-ice bath. After stirring for 10 min, Intermediate 1G (16.2 g, 50 mmol) was added and the reaction was heated at 85 C for 20 h. After this time, acetic acid (100 mL) was added, the reaction flask was fitted with a distillation head and the temperature was raised to 130 C. 1,2-dimethoxyethane was distilled off under atmospheric pressure until the distillate was acidic (-100 mL). The distillation head was removed, a reflux condenser was attached, water (20 mL) was added and the reaction heated at 130 C for 12 h. The reaction was concentrated under reduced pressure and poured onto 200 g of ice and 100 mL of saturated aqueous NaOAc. Intermediate 1H was isolated as a white solid by filtration and further dried by reflxing with toluene in a Dean- Stark apparatus (11.0 g, 76 %). m/z ( +H)+= 288.2.1H- MR (400 MHz; DMSO-d6): delta 12.05 (bs, 1H), 8.79 (d, J= 4.5 Hz, 1H), 8.06 (dd, J= 9.2, 5.8 Hz, 1H), 7.94 (dd, J= 11.0, 2.8 Hz, 1H), 7.66-7.61 (m, 1H), 7.50 (d, J= 4.6 Hz, 1H), 2.41 (d, J= 7.6 Hz, 2H), 2.28- 2.23 (m, 1H), 1.87-1.78 (m, 2H), 1.73-1.64 (m, 6H).

The synthetic route of 541-16-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; BALOG, James Aaron; CHERNEY, Emily Charlotte; SHAN, Weifang; WILLIAMS, David K.; ZHANG, Liping; (87 pag.)WO2019/74822; (2019); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics