Category: esters-buliding-blocks

Polyesters are important plastics, with monomers linked by ester moieties. Phosphoesters form the backbone of DNA molecules. 870-50-8, formula is C10H18N2O4, Name is Di-tert-butyl diazene-1,2-dicarboxylate.Nitrate esters, such as nitroglycerin, are known for their explosive properties. Name: Di-tert-butyl diazene-1,2-dicarboxylate.

Chauvier, Clement;Finck, Lucie;Hecht, Stefan;Oestreich, Martin research published 《 General Synthesis and Optical Properties of N-Aryl-N’-Silyldiazenes》, the research content is summarized as follows. Silyldiazenes ArN:NSiR₃ were prepared by oxidation of the corresponding hydrazines with azodicarboxylate diesters with high yields and generality. While organo-substituted diazenes (R¹-N:N-R² with R = alkyl, aryl) are a well-studied class of compounds, much less is known about their heavier group 14 analogs, notably because of their perceived instability. We report herein a general oxidative protocol to prepare various N-aryl-N’-silyldiazenes by a fast and mild dehydrogenation of the corresponding silylhydrazines using di-tert-butylazodicarboxylate as an oxidant. The optical properties of these stable blue to purple silyldiazenes were also studied by UV/visible absorption spectroscopy and supported by TD-DFT calculations

870-50-8, Di-tert-butyl azodicarboxylate, also known as Di-tert-butyl azodicarboxylate, is a useful research compound. Its molecular formula is C₁₀H₁₈N₂O₄ and its molecular weight is 230.26 g/mol. The purity is usually 95%.
Di-tert-butyl azodicarboxylate is a reagent used in the electrophilic amination of β-keto esters catalyzed by an axially chiral guanidine. Building block in an enantioselective synthesis of 3,6-dihyropyridazines employing organocatalysts such a L-proline or (S)-2-pyrrolidinyl tetrazole. Utilized in the asymmetric Friedel-Crafts amination via a chiral organocatalyst.
Di-tert-butyl azodicarboxylate is a reagent used in the preparation of acyl hydrazinedicarboxylates via photoorganocatalytic hydroacylation of dialkyl azodicarboxylates with aldehydes in presence of phenylglyoxylic acid as photocatalyst., Name: Di-tert-butyl diazene-1,2-dicarboxylate

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Ester is a chemical compound derived from an oxoacid (organic or inorganic) in which at least one –OH hydroxyl group is replaced by an –O– alkyl (alkoxy) group, 99769-19-4, formula is C8H9BO4, Name is 3-(Methoxycarbonyl)phenylboronic acid. as in the substitution reaction of a carboxylic acid and an alcohol. Computed Properties of 99769-19-4.

Chen, Fenglin;Xu, Xianfeng;He, Yuli;Huang, Genping;Zhu, Shaolin research published 《 NiH-Catalyzed Migratory Defluorinative Olefin Cross-Coupling: Trifluoromethyl-Substituted Alkenes as Acceptor Olefins to Form gem-Difluoroalkenes》, the research content is summarized as follows. We report a NiH-catalyzed migratory defluorinative coupling between two electronically differentiated olefins. A broad range of unactivated donor olefins can be joined directly to acceptor olefins containing an electron-deficient trifluoromethyl substituent in both intra- and intermol. fashion to form gem-difluoroalkenes. This migratory coupling shows both site- and chemoselectivity under mild conditions, with the formation of a tertiary or quaternary carbon center.

99769-19-4, 3-Methoxycarbonylphenylboronic acid is a useful research compound. Its molecular formula is C8H9BO4 and its molecular weight is 179.97 g/mol. The purity is usually 95%.

3-Methoxycarbonylphenylboronic acid is a reactanct that has been involved in a variety of applications. For instance, it has been used in Suzuki-Miyaura cross-coupling, Iterative cross-coupling of boronate building blocks, cross-coupling with aryl/ alkenyl sulfonates, synthesis of symmetrical biaryls via CuCl catalyzed homocoupling, trifluoromethylation, and cyanation just to name a few of its many uses.

3-Methoxycarbonylphenylboronic acid is a boronate ligand that has been shown to have an interaction with the nitrogen atoms in amines. This compound is used for the Suzuki coupling reaction, which is a chemical reaction between an organoboron compound and an organic electrophile. 3-Methoxycarbonylphenylboronic acid has a helical structure that can be seen by FTIR spectroscopy and it has potent inhibitory activity., Computed Properties of 99769-19-4

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Ester is a chemical compound derived from an oxoacid (organic or inorganic) in which at least one –OH hydroxyl group is replaced by an –O– alkyl (alkoxy) group, 870-50-8, formula is C10H18N2O4, Name is Di-tert-butyl diazene-1,2-dicarboxylate. as in the substitution reaction of a carboxylic acid and an alcohol. Application In Synthesis of 870-50-8.

Chen, Lei;Li, Fei;Nandi, Mitoshi;Huang, Lu;Chen, Zhizhong;Wei, Junfa;Chi, Weijie;Liu, Xiaogang;Yang, Jun research published 《 Towards tetrazine-based near-infrared fluorogenic dyes: Is there a wavelength limit?》, the research content is summarized as follows. Tetrazine-based fluorogenic dyes have been broadly applied in the studies of many biomols. in live cells via wash-free imaging. While near-IR (NIR) dyes are much preferred in these scenarios, few tetrazine-based NIR fluorogenic dyes have been reported to date. The authors developed three tetrazine-based cyanine dyes with emission wavelengths of up to ∼790 nm and fluorescence turn-on ratios of ∼4. The authors also performed quantum chem. calculations to rationalize the low turn-on ratio in these dyes. The authors′ results show that based on the dark-state quenching mechanism, the tetrazine moiety is intrinsically not suitable for developing NIR fluorogenic dyes with emission wavelengths of >∼710 nm.

870-50-8, Di-tert-butyl azodicarboxylate, also known as Di-tert-butyl azodicarboxylate, is a useful research compound. Its molecular formula is C₁₀H₁₈N₂O₄ and its molecular weight is 230.26 g/mol. The purity is usually 95%.
Di-tert-butyl azodicarboxylate is a reagent used in the electrophilic amination of β-keto esters catalyzed by an axially chiral guanidine. Building block in an enantioselective synthesis of 3,6-dihyropyridazines employing organocatalysts such a L-proline or (S)-2-pyrrolidinyl tetrazole. Utilized in the asymmetric Friedel-Crafts amination via a chiral organocatalyst.
Di-tert-butyl azodicarboxylate is a reagent used in the preparation of acyl hydrazinedicarboxylates via photoorganocatalytic hydroacylation of dialkyl azodicarboxylates with aldehydes in presence of phenylglyoxylic acid as photocatalyst., Application In Synthesis of 870-50-8

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Polyesters are important plastics, with monomers linked by ester moieties. Phosphoesters form the backbone of DNA molecules. 2495-37-6, formula is C11H12O2, Name is Benzyl methacrylate.Nitrate esters, such as nitroglycerin, are known for their explosive properties. Synthetic Route of 2495-37-6.

Chen, Lili;Feng, Wenwen;Li, Mengxue;Jin, Zhekai;Zhang, Yucheng;Cheng, Zhe;Liu, Yuncong;Wang, Chao research published 《 A Stiff yet Rapidly Self-Healable Elastomer in Harsh Aqueous Environments》, the research content is summarized as follows. Rapid underwater self-healing elastomers with high mech. strength at ambient temperature are highly desirable for dangerous underwater operations. However, current room temperature self-healing materials have shortcomings, such as low healing strength (below megapascal), long healing time (hours), and decay of healing functions in harsh environments (salty, acidic, and basic solutions), limiting their practical applications. Herein, it is introduced water-stable Debye forces and high-d. nano-sized phys. crosslinking into one network to achieve a stiff yet rapid self-healing elastomer that can work in harsh aqueous environments. The obtained elastomer possesses a high Young’s modulus of 48 MPa (24 times than that of natural elastomer), and it can achieve 90% of maximum mech. strength healing for 10 s at ambient temperature in all types of harsh aqueous conditions, outperforming three orders of magnitudes in healing speed of reported room-temperature self-healing elastomers with Young’s modulus over 10 MPa. The new stiff yet rapidly healable elastomers have great potential in emergent repair in urgent and dangerous cases.

Synthetic Route of 2495-37-6, Benzyl methacrylate, also known as Benzyl methacrylate, is a useful research compound. Its molecular formula is C11H12O2 and its molecular weight is 176.21 g/mol. The purity is usually 95%.
Benzyl methacrylate is a chemical compound that belongs to the group of benzyl compounds. It has a copolymer structure with methyl ethyl methacrylate (MEMA) and hydroxyl groups. Benzyl methacrylate is produced by polymerization of benzyl chloride with allyl carbonate in the presence of radiation, forming a polymeric matrix. The morphology of this copolymer depends on the length of the benzyl chains and the concentration of MEMA., 2495-37-6.

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Glycerides are fatty acid esters of glycerol; they are important in biology, being one of the main classes of lipids and comprising the bulk of animal fats and vegetable oils. 870-50-8, formula is C10H18N2O4, Name is Di-tert-butyl diazene-1,2-dicarboxylate. Esters typically have a pleasant smell; those of low molecular weight are commonly used as fragrances and are found in essential oils and pheromones. Electric Literature of 870-50-8.

Chen, Lin;Wang, Shuangshuang;Zhang, Yingying;Li, Yuchao;Ge, Xiangcai;Li, Guang;Wang, Liping research published 《 N-Hydroxyphthalimide catalyzed hydrazination of polyethylene glycol》, the research content is summarized as follows. In this work, N-hydroxyphthalimide (NHPI) was used as catalyst to cleave C-H bonds in polyethylene glycol (PEG) backbones to generate carbon free radicals that reacted with the N=N bonds of di-tert-Bu azodicarboxylate (DBAD) to form C-N grafts (PEG-g-DBAD). Subsequently, the tert-butoxycarbonyl (-Boc) groups of PEG-g-DBAD were removed by treating with trifluoroacetic acid (TFA) to obtain hydrazino functionalized PEG (PEG-g-NHNH₂). The structure of functionalized PEG was confirmed by Fourier transform IR spectroscopy (FTIR), ¹H NMR spectroscopy (¹H NMR), elemental anal. and size exclusion chromatog. (SEC). Thermal gravimetric anal. (TGA) and differential scanning calorimetry (DSC) were applied to investigate thermal stability and crystallization properties of the functionalized PEG. The synthesized PEG-g-NHNH₂ could be used to toughen epoxy resin (EP). The results of mech. testing and SEM images indicated that the compatibility between PEG backbones and EP has been improved due to the existing of hydrazino groups. The grafted hydrazine groups could also react with 2-bromoisobutyryl bromide (BIBB) to obtain PEG-g-BIBB which initiated the polymerization of (methyl) methacrylate (MMA) by ARGET-ATRP. Thus, we presented a methodol. with high efficiency for hydrazination of PEG under mild condition, and the functionalized PEG might have many potential applications.

Electric Literature of 870-50-8, Di-tert-butyl azodicarboxylate, also known as Di-tert-butyl azodicarboxylate, is a useful research compound. Its molecular formula is C₁₀H₁₈N₂O₄ and its molecular weight is 230.26 g/mol. The purity is usually 95%.
Di-tert-butyl azodicarboxylate is a reagent used in the electrophilic amination of β-keto esters catalyzed by an axially chiral guanidine. Building block in an enantioselective synthesis of 3,6-dihyropyridazines employing organocatalysts such a L-proline or (S)-2-pyrrolidinyl tetrazole. Utilized in the asymmetric Friedel-Crafts amination via a chiral organocatalyst.
Di-tert-butyl azodicarboxylate is a reagent used in the preparation of acyl hydrazinedicarboxylates via photoorganocatalytic hydroacylation of dialkyl azodicarboxylates with aldehydes in presence of phenylglyoxylic acid as photocatalyst., 870-50-8.

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Esters typically have a pleasant smell; those of low molecular weight are commonly used as fragrances and are found in essential oils and pheromones. 611-13-2, formula is C6H6O3, Name is Methyl furan-2-carboxylate. They perform as high-grade solvents for a broad array of plastics, plasticizers, resins, and lacquers, and are one of the largest classes of synthetic lubricants on the commercial market. COA of Formula: C6H6O3.

Chen, Xiaoai;Chen, Haiqiang;Xiao, Jie;Liu, Jingyi;Tang, Niang;Zhou, Aimei research published 《 Variations of volatile flavour compounds in finger citron (Citrus medica L. var. sarcodactylis) pickling process revealed by E-nose, HS-SPME-GC-MS and HS-GC-IMS》, the research content is summarized as follows. In this study, the variations of volatile flavor components in the pickling process of finger citron were investigated by electronic nose (E-nose), headspace solid phase microextraction-gas chromatog.-mass spectrometry (HS-SPME-GC-MS) and headspace-gas chromatog.-ion mobility spectrometry (HS-GC-IMS). Linalool, limonene, (E)-3,7-dimethyl-1,3,6-octatriene, myrcene, 3-carene, β-pinene, α-pinene, terpinolene, 1-methyl-4-(1-methylethyl)-1,4-cyclohexadiene, α-terpinene, (S)-β-bisabolene, 1-isopropyl-2-methylbenzene and 1-methyl-4-(1-methylethenyl)-benzene were the stable substances at relatively high contents in finger citron at different pickling process. Salting and drying steps in the pickling process exerted greatest influence on the volatile components of finger citron. Salting promoted the generation of aldehydes, esters and acids, but led to the disappearance of alcs., while drying promoted the generation of alcs., phenols, aldehydes and acids at the expense of reduction in terpenoids. Our study revealed that the characteristic volatile compounds of finger citron pickled products was mainly formed by the biol. reactions in the salting stage and thermal chem. transformations in the drying stage. This study also validated the suitability of E-nose combined with HS-SPME-GC-MS and HS-GC-IMS in tracking the changes of volatile components in finger citron during the pickling process.

COA of Formula: C6H6O3, Methyl 2-furoate has been identified as one of the volatile flavor compounds in tequila, okra, berrycactus and black currant juice.
Methyl 2-furoate, also known as fema 2703 or methyl pyromucate, belongs to the class of organic compounds known as furoic acid esters. These are ester derivatives of furoic acid. Methyl 2-furoate is soluble (in water) and an extremely weak basic (essentially neutral) compound (based on its pKa). Within the cell, methyl 2-furoate is primarily located in the cytoplasm. Methyl 2-furoate is a sweet, fruity, and fungal tasting compound that can be found in a number of food items such as cocoa and cocoa products, potato, tamarind, and fruits. This makes methyl 2-furoate a potential biomarker for the consumption of these food products.
Methyl 2-furoate is a reactive compound that belongs to the family of sesquiterpene lactones. It has been shown to have phosphotungstic acid and hydrochloric acid reactivity, as well as nitrous and water vapor sensitivity. Methyl 2-furoate also reacts with radiation, which can be used for structural analysis. The compound is an intermediate in the synthesis of pluronic p123, which is used in fabricating biomedical devices. Methyl 2-furoate has been shown to have anti-inflammatory properties through its inhibitory effect on prostaglandin synthesis., 611-13-2.

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Ester is a chemical compound derived from an oxoacid (organic or inorganic) in which at least one –OH hydroxyl group is replaced by an –O– alkyl (alkoxy) group, 870-50-8, formula is C10H18N2O4, Name is Di-tert-butyl diazene-1,2-dicarboxylate. as in the substitution reaction of a carboxylic acid and an alcohol. HPLC of Formula: 870-50-8.

Beveridge, Ramsay E.;Hu, Yiwei;Gregoire, Bruce;Batey, Robert A. research published 《 Di-tert-butyl Ethynylimidodicarbonate as a General Synthon for the β-Aminoethylation of Organic Electrophiles: Application to the Formal Synthesis of Pyrrolidinoindoline Alkaloids (±)-CPC-1 and (±)-Alline》, the research content is summarized as follows. The reagent di-tert-Bu ethynylimidodicarbonate is demonstrated as a β-aminoethyl anion synthetic equivalent It can be used to install ethyleneamine groups by exploiting its terminal alkyne reactivity with common organic electrophiles. Reactions exemplified with this terminal ynimide reagent include additions to imines, aldehydes, ketones, pyridinium salts, Michael acceptors, epoxides, as well as Pd-catalyzed Sonogashira couplings. Subsequent regioselective [3+2] cycloadditions of the alkynyl-imides (ynimides) generate N,N-di-Boc imide functionalized triazole and isoxazole heterocycles. Reduction of the ynimides with Pd-catalyzed hydrogenation generates ethyleneimides with easily removable N,N-di-Boc-carbamate protecting groups allowing for a flexible ynimide based approach to ethyleneamine installation. The utility of this two-step aminoethylation strategy was demonstrated in the short formal syntheses of pyrrolidinoindoline alkaloids (±)-CPC-1 and (±)-alline. Analogously, the reagent (N,N,N’)-tri-Boc 2-ethynylhydrazine, serves as a β-hydrazinoethyl anion synthetic equivalent

HPLC of Formula: 870-50-8, Di-tert-butyl azodicarboxylate, also known as Di-tert-butyl azodicarboxylate, is a useful research compound. Its molecular formula is C₁₀H₁₈N₂O₄ and its molecular weight is 230.26 g/mol. The purity is usually 95%.
Di-tert-butyl azodicarboxylate is a reagent used in the electrophilic amination of β-keto esters catalyzed by an axially chiral guanidine. Building block in an enantioselective synthesis of 3,6-dihyropyridazines employing organocatalysts such a L-proline or (S)-2-pyrrolidinyl tetrazole. Utilized in the asymmetric Friedel-Crafts amination via a chiral organocatalyst.
Di-tert-butyl azodicarboxylate is a reagent used in the preparation of acyl hydrazinedicarboxylates via photoorganocatalytic hydroacylation of dialkyl azodicarboxylates with aldehydes in presence of phenylglyoxylic acid as photocatalyst., 870-50-8.

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Glycerides are fatty acid esters of glycerol; they are important in biology, being one of the main classes of lipids and comprising the bulk of animal fats and vegetable oils. 99769-19-4, formula is C8H9BO4, Name is 3-(Methoxycarbonyl)phenylboronic acid. Esters typically have a pleasant smell; those of low molecular weight are commonly used as fragrances and are found in essential oils and pheromones. HPLC of Formula: 99769-19-4.

Blindheim, Fredrik Heen;Olsen, Cecilie Elisabeth;Krogh Soegaard, Caroline;Otterlei, Marit;Sundby, Eirik;Hoff, Baard Helge research published 《 Synthetic Strategies towards Imidazopyridinones and 7-Azaoxindoles and their Evaluation as Antibacterial Agents》, the research content is summarized as follows. Imidazopyridinones I (R = H, OMe) and 7-azaoxindole II are two classes of heterocyclic compounds with only limited previous use in organic and medicinal chem. Various synthetic methods and routes have been evaluated to identify safe and robust chem. to advanced imidazopyridinone I building blocks and inhibitor structures. Preparation of the 7-azaoxindoles II was challenged by instability of the core scaffold. Key to the successful isolation of the target structure was development of a mild Suzuki cross-coupling in non-aqueous media. The imidazopyridinones I were potent inhibitors of the E. coli thymidylate monophosphate kinase, while the 7-azaoxindole II showed low activity. The compounds were inactive in cell-based studies, indicating poor cell wall penetration.

HPLC of Formula: 99769-19-4, 3-Methoxycarbonylphenylboronic acid is a useful research compound. Its molecular formula is C8H9BO4 and its molecular weight is 179.97 g/mol. The purity is usually 95%.

3-Methoxycarbonylphenylboronic acid is a reactanct that has been involved in a variety of applications. For instance, it has been used in Suzuki-Miyaura cross-coupling, Iterative cross-coupling of boronate building blocks, cross-coupling with aryl/ alkenyl sulfonates, synthesis of symmetrical biaryls via CuCl catalyzed homocoupling, trifluoromethylation, and cyanation just to name a few of its many uses.

3-Methoxycarbonylphenylboronic acid is a boronate ligand that has been shown to have an interaction with the nitrogen atoms in amines. This compound is used for the Suzuki coupling reaction, which is a chemical reaction between an organoboron compound and an organic electrophile. 3-Methoxycarbonylphenylboronic acid has a helical structure that can be seen by FTIR spectroscopy and it has potent inhibitory activity., 99769-19-4.

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Esters typically have a pleasant smell; those of low molecular weight are commonly used as fragrances and are found in essential oils and pheromones. 2495-37-6, formula is C11H12O2, Name is Benzyl methacrylate. They perform as high-grade solvents for a broad array of plastics, plasticizers, resins, and lacquers, and are one of the largest classes of synthetic lubricants on the commercial market. SDS of cas: 2495-37-6.

Booth, Joshua R.;Davies, Joshua D.;Bon, Stefan A. F. research published 《 ω-Unsaturated methacrylate macromonomers as reactive polymeric stabilizers in mini-emulsion polymerization》, the research content is summarized as follows. Polymer latexes of poly(benzyl methacrylate) P(BzMA) were synthesized by mini-emulsion polymerization, using hexadecane as the hydrophobe and ω-unsaturated methacrylate-based macromonomers as a reactive stabilizer. The amphiphilic macromonomers were synthesized by catalytic chain transfer emulsion polymerization (CCTP) and subsequent chain extension via sulfur-free reversible addition-fragmentation chain transfer (SF-RAFT). Their critical micelle concentration (CMC) was determined by dynamic light scattering (DLS), and micelle size was measured using DLS and small angle X-ray scattering (SAXS). The surface activity of the stabilizers was measured by pendant drop tensiometry and compared to modelled behavior. For the mini-emulsion polymerizations, macromonomer stabilizers were added at a range of concentrations, with respect to the dispersed phase. Using less than 5 wt% stabilizer, SEM micrographs showed many of the particles were bowl-shaped. At concentrations of 5 wt% and higher, bimodal droplet and particle distributions were observed by DLS and SEM. We propose shear-dependent depletion flocculation as the explanation. The effectiveness of the reactive stabilizers was tested in terms of latex stability and mol. weight control. Resistance to coagulation during freeze-thaw cycles and prolonged dialysis were tested. Examination of P(BzMA) reaction kinetics and mol. weight indicated that the incorporation of macromonomer is gradual and less than quant. at the end of the polymerization process, in agreement with the mechanistic understanding.

SDS of cas: 2495-37-6, Benzyl methacrylate, also known as Benzyl methacrylate, is a useful research compound. Its molecular formula is C11H12O2 and its molecular weight is 176.21 g/mol. The purity is usually 95%.
Benzyl methacrylate is a chemical compound that belongs to the group of benzyl compounds. It has a copolymer structure with methyl ethyl methacrylate (MEMA) and hydroxyl groups. Benzyl methacrylate is produced by polymerization of benzyl chloride with allyl carbonate in the presence of radiation, forming a polymeric matrix. The morphology of this copolymer depends on the length of the benzyl chains and the concentration of MEMA., 2495-37-6.

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Glycerides are fatty acid esters of glycerol; they are important in biology, being one of the main classes of lipids and comprising the bulk of animal fats and vegetable oils. 870-50-8, formula is C10H18N2O4, Name is Di-tert-butyl diazene-1,2-dicarboxylate. Esters typically have a pleasant smell; those of low molecular weight are commonly used as fragrances and are found in essential oils and pheromones. Safety of Di-tert-butyl diazene-1,2-dicarboxylate.

Breton, Gary W.;Hahn, Lauren A.;Martin, Kenneth L. research published 《 Structural verification of a tetrahydrotetrazole compound》, the research content is summarized as follows. Tetrahydrotetrazoles are five-membered-ring heterocycles containing four contiguous saturated nitrogen atoms. Very few examples of such compounds have been reported in the literature. Our previous attempt at the synthesis of a member of this class of compound suggested that the N-N bonds may be more labile than expected. This finding raised the question as to whether the structures of any of the previously reported tetrahydrotetrazoles had been properly assigned. We have reproduced the synthesis of a reported tetrahydrotetrazole, namely 1,2-di-tert-Bu 3-phenyl-1H,2H,3H,10bH-[1,2,3,4]tetrazolo[5,1-a]isoquinoline-1,2-dicarboxylate, C₂₅H₃₀N₄O₄, and have now confidently confirmed its structure via X-ray crystallog. However, while sufficiently stable in the crystal phase, we discovered that it remains very labile in solution (having a half-life of only 15 min at 20°C in CDCl₃). A tentative reaction pathway for its dissociation based on ¹H NMR spectral evidence is provided.

Safety of Di-tert-butyl diazene-1,2-dicarboxylate, Di-tert-butyl azodicarboxylate, also known as Di-tert-butyl azodicarboxylate, is a useful research compound. Its molecular formula is C₁₀H₁₈N₂O₄ and its molecular weight is 230.26 g/mol. The purity is usually 95%.
Di-tert-butyl azodicarboxylate is a reagent used in the electrophilic amination of β-keto esters catalyzed by an axially chiral guanidine. Building block in an enantioselective synthesis of 3,6-dihyropyridazines employing organocatalysts such a L-proline or (S)-2-pyrrolidinyl tetrazole. Utilized in the asymmetric Friedel-Crafts amination via a chiral organocatalyst.
Di-tert-butyl azodicarboxylate is a reagent used in the preparation of acyl hydrazinedicarboxylates via photoorganocatalytic hydroacylation of dialkyl azodicarboxylates with aldehydes in presence of phenylglyoxylic acid as photocatalyst., 870-50-8.

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics