Category: 99-27-4

Name: Dimethyl 5-aminoisophthalate. In 2020 CHEM-EUR J published article about CARBON-DIOXIDE CAPTURE; SECONDARY BUILDING UNITS; TOPOLOGICAL ANALYSIS; CRYSTAL-STRUCTURES; CHEMICAL FIXATION; GAS-ADSORPTION; SEPARATION; DESIGN; CONSTRUCTION; CHEMISTRY in [Gupta, Vijay; Mandal, Sanjay K.] Indian Inst Sci Educ & Res Mohali, Dept Chem Sci, Sect 81,Manauli PO, Mohali 140306, Punjab, India in 2020, Cited 73. The Name is Dimethyl 5-aminoisophthalate. Through research, I have a further understanding and discovery of 99-27-4.

A new triazole-functionalized tetracarboxylic acid ligand (H4L) has been synthesized and utilized for the fabrication of a 3D Zn-II organic framework with a Zn-4(-COO)(6) cluster as the secondary building unit. The framework exhibits very good thermal stability and consists of dual functionalities of exposed Lewis acidic metal sites and accessible nitrogen-donor Lewis basic sites. The Lewis basic nitrogen sites in the framework serve as CO2 binding sites for highly selective CO2 capture and the presence of exposed Lewis acidic metal sites in the framework make it an efficient heterogeneous catalyst for the chemical fixation of CO2 into value-added cyclic carbonates under ambient conditions.

About Dimethyl 5-aminoisophthalate, If you have any questions, you can contact Gupta, V; Mandal, SK or concate me.. Name: Dimethyl 5-aminoisophthalate

Reference:
Patent; ASTRA ZENECA AB; NPS PHARMACEUTICALS, INC.; WO2004/14881; (2004); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Authors Tang, HJ; Zhang, B; Xue, F; Feng, C in AMER CHEMICAL SOC published article about ALKENES in [Tang, Hai-Jun; Zhang, Bin; Feng, Chao] Nanjing Tech Univ, Sch Chem & Mol Engn, Tech Inst Fluorochem TIF, Inst Adv Synth, Nanjing 211816, Peoples R China; [Xue, Fei] Nanjing Forestry Univ, Coll Sci, Inst Mat Phys & Chem, Nanjing 210037, Peoples R China in 2021, Cited 37. Category: esters-buliding-blocks. The Name is Dimethyl 5-aminoisophthalate. Through research, I have a further understanding and discovery of 99-27-4

An unprecedented approach for assembling a broad range of 1,2-diarylethane derivatives with fluorine-containing fully substituted carbon centers was developed. The protocol features straightforward operation, proceeds under metal-free condition, and accommodates a large variety of synthetically useful functionalities. The critical aspect to the success of this novel transformation lies in using aryldiazonium salts as both aryl radical progenitor and also as single electron acceptor which elegantly enables a radical-polar crossover manifold.

Category: esters-buliding-blocks. About Dimethyl 5-aminoisophthalate, If you have any questions, you can contact Tang, HJ; Zhang, B; Xue, F; Feng, C or concate me.

Reference:
Patent; ASTRA ZENECA AB; NPS PHARMACEUTICALS, INC.; WO2004/14881; (2004); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Xiang, XL; Liu, YY; Liu, Y; Wang, XY; Jin, YG in [Xiang, Xiao-le; Liu, Yuan-yuan; Liu, Yang; Wang, Xiao-yun; Jin, Yong-guo] Huazhong Agr Univ, Coll Food Sci & Technol, Natl Res & Dev Ctr Egg Proc, Wuhan, Hubei, Peoples R China published Changes in structure and flavor of egg yolk gel induced by lipid migration under heating in 2020, Cited 39. Quality Control of Dimethyl 5-aminoisophthalate. The Name is Dimethyl 5-aminoisophthalate. Through research, I have a further understanding and discovery of 99-27-4.

Lipid migration is widespread in food system and has an important effect on food quality. It is urgent to explore the lipid migration in egg yolk after heating. The content of lipids in upper part (HL) was higher than that in bottom part (LL), and the lipids migration in yolk gel under heating were confirmed by MRI (T1) and T2 relaxation time of LF-NMR. Subsequently, the XDR result demonstrated the high lipid content induced the decrease in crystallinity of protein in HL part. The structures of HL part trend to be more ordered, stable (beta-sheet & beta-turns) and flat (alpha-helices) than LL part, also, more water distributed in LL part were observed by FTIR spectrum. The SEM results revealed that lipids migrated from LL to HL part, eventually lead to the protein in HL part of heated yolk gel unfold, the globular structure collapsed and become flatter. Morever, ethyl acetate, hexanal, etc. and hexanal, ethyl acetate, dimethyl-silanediol, etc. were identified as the main VOCs of LL and HL part of heated yolk gel, respectively. Lipid migration result in more lipid-specific volatiles were formed in the HL part, such as hexanal, 3-hydroxy-cyclohexanone, 2-pentyl-furan, D-limonene, 2-ethyl-1-hexanol, benzeneacetaldehyde. Lipid migration in heated yolk gel, caused by heat treatment, resulted in the changes of structure and flavor between HL and LL part.

Quality Control of Dimethyl 5-aminoisophthalate. About Dimethyl 5-aminoisophthalate, If you have any questions, you can contact Xiang, XL; Liu, YY; Liu, Y; Wang, XY; Jin, YG or concate me.

Reference:
Patent; ASTRA ZENECA AB; NPS PHARMACEUTICALS, INC.; WO2004/14881; (2004); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

HPLC of Formula: C10H11NO4. Authors Montes-Andres, H; Leo, P; Munoz, A; Rodriguez-Dieguez, A; Orcajo, G; Choquesillo-Lazarte, D; Martos, C; Martinez, F; Botas, JA; Calleja, G in AMER CHEMICAL SOC published article about in [Montes-Andres, Helena; Orcajo, Gisela; Martos, Carmen; Botas, Juan A.; Calleja, Guillermo] Rey Juan Carlos Univ, Dept Chem Energy & Mech Technol, Mostoles 28933, Spain; [Leo, Pedro; Munoz, Antonio; Martinez, Fernando] Rey Juan Carlos Univ, Dept Chem & Environm Technol, Mostoles 28933, Spain; [Rodriguez-Dieguez, Antonio] Univ Granada, Dept Inorgan Chem, Granada, Spain; [Choquesillo-Lazarte, Duane] Univ Granada, Lab Estudios Cristalog, CSIC, IACT, Granada 18100, Spain in 2020, Cited 66. The Name is Dimethyl 5-aminoisophthalate. Through research, I have a further understanding and discovery of 99-27-4

Herein, two novel isostructural metal-organic frameworks (MOFs) M-URJC-4 (M = Co, Ni; URJC = Universidad Rey Juan Carlos) with open metal sites, permanent microposity, and large surface areas and pore volumes have been developed. These novel MOFs, with polyhedral morphology, crystallize in the monoclinic P2(1)/c space group, exhibiting a three-dimensional structure with microporous channels along the c axis. Initially, they were fully characterized and tested in hydrogen (H-2) adsorption at different conditions of temperature and pressure. The physisorption capacities of both materials surpassed the gravimetric H-2 uptake shown by most MOF materials under the same conditions. On the basis of the outstanding adsorption properties, the Ni-URJC-4 material was used as a catalyst in a one-pot reductive amination reaction using various carbonyl compounds and primary amines. A possible chemical pathway to obtain secondary amines was proposed via imine formation, and remarkable performances were accomplished. This work evidences the dual ability of M-URJC-4 materials to be used as a H-2 adsorbent and a catalyst in reductive amination reactions, activating molecular H-2 at low pressures for the reduction of C=N double bonds and providing reference structural features for the design of new versatile heterogeneous materials for industrial application.

HPLC of Formula: C10H11NO4. About Dimethyl 5-aminoisophthalate, If you have any questions, you can contact Montes-Andres, H; Leo, P; Munoz, A; Rodriguez-Dieguez, A; Orcajo, G; Choquesillo-Lazarte, D; Martos, C; Martinez, F; Botas, JA; Calleja, G or concate me.

Reference:
Patent; ASTRA ZENECA AB; NPS PHARMACEUTICALS, INC.; WO2004/14881; (2004); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Authors Karmakar, A; Paul, A; Rubio, GMDM; Soliman, MMA; Fatima, M; da Silva, CG; Pombeiro, AJL in FRONTIERS MEDIA SA published article about ACID; CATALYSIS; MOFS in [Karmakar, Anirban; Paul, Anup; Rubio, Guilherme M. D. M.; Soliman, Mohamed M. A.; Fatima, M.; Guedes da Silva, C.; Pombeiro, Armando J. L.] Univ Lisbon, Inst Super Tecn, Ctr Quim Estrutural, Lisbon, Portugal in 2019, Cited 31. HPLC of Formula: C10H11NO4. The Name is Dimethyl 5-aminoisophthalate. Through research, I have a further understanding and discovery of 99-27-4

A pyridine-based amide functionalized tetracarboxylic acid, 5,5 ‘-(pyridine-2, 6-dicarbonyl)bis(azanediyl)}diisophthalic acid (H4L), was synthesized and its coordination chemistry toward zinc(II) and cadmium(II) ions was studied. The reactions of H4L with Zn(NO3)(2).6H(2)O and Cd(NO3)(2).4H(2)O led to its full or partial deprotonation, respectively, and the formation of the 2D coordination polymers [Zn-2(L)(H2O)(4)](n).4n(H2O) (1) and [Cd-3(HL)(2)(DMF)(4)](n).4n(DMF) (2) (DMF = N,N’-dimethylformamide), respectively. They were characterized by elemental analysis, FT-IR, photoluminescence, thermogravimetry, and single-crystal and powder X-ray diffraction. In 1, the L4- ligand is planar with every carboxylate anion binding a Zn(II) cation and giving rise to a 2D grid with the metals with tetrahedral environments. In 2, the combination of bridging HL3- and dimethylformamide to form trinuclear Cd(II) clusters engenders secondary building block units and generates a layer-type 2D network with the metals with octahedral and pentagonal bipyramid coordination geometries. The topological analyses of 1 and 2 reveal 2,4-connected and 3,6-connected binodal nets, respectively. On account of the presence of Lewis acid (Zn or Cd centers) as well as basic (uncoordinated pyridine and amide groups) sites, 1 and (to a much lower extent) 2 effectively catalyze the one-pot cascade deacetalization-Knoevenagel condensation reactions under quite mild conditions. They act as heterogeneous catalysts, being easy to recover and recycle without losing activity.

About Dimethyl 5-aminoisophthalate, If you have any questions, you can contact Karmakar, A; Paul, A; Rubio, GMDM; Soliman, MMA; Fatima, M; da Silva, CG; Pombeiro, AJL or concate me.. HPLC of Formula: C10H11NO4

Reference:
Patent; ASTRA ZENECA AB; NPS PHARMACEUTICALS, INC.; WO2004/14881; (2004); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Recommanded Product: 99-27-4. I found the field of Chemistry; Engineering; Polymer Science very interesting. Saw the article Disubstituted pendant-functionalized insulating-conductive block copolymer with enhanced dielectric and energy storage performance published in 2019, Reprint Addresses Han, HJ; Xie, MR (corresponding author), East China Normal Univ, Sch Chem & Mol Engn, Shanghai 200241, Peoples R China.. The CAS is 99-27-4. Through research, I have a further understanding and discovery of Dimethyl 5-aminoisophthalate.

Disubstituted pendant-functionalized block copolymer consisting of insulating polynorbornene and conductive polyacetylene segments was synthesized by tandem metathesis polymerization, and displayed high dielectric constant of 30 and low dielectric loss of about 0.04, while behaved bad film-forming property, which could be improved by incorporating polycyclooctene into polynorbomene backbone. The generated flexible block copolymer with well-defined nanostructure exhibited a relatively high dielectric constant of 23, very low dielectric loss of below 0.0035, and high stored and released energy densities up to 4.52 and 4.02 J cm(-3) at the electric field of 165 MV m(-1),respectively, accompanied with the charge-discharge efficiency of 90%. The enhanced dielectric and energy storage capability were attributed to high permanent dipole moment and the interfacial polarization derived from the unique nanomorphology of block copolymer.

Recommanded Product: 99-27-4. About Dimethyl 5-aminoisophthalate, If you have any questions, you can contact Zhou, DD; Zhang, HC; Ma, CH; Han, HJ; Xie, MR or concate me.

Reference:
Patent; ASTRA ZENECA AB; NPS PHARMACEUTICALS, INC.; WO2004/14881; (2004); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

An article Changes in structure and flavor of egg yolk gel induced by lipid migration under heating WOS:000484658800006 published article about CHEMICAL-COMPOSITION; PHYSICAL-PROPERTIES; DUCK EGG; BIO-OIL; MICROSTRUCTURE; MEAT; SPECTROSCOPY; TEMPERATURE; EXTRACTION; VOLATILES in [Xiang, Xiao-le; Liu, Yuan-yuan; Liu, Yang; Wang, Xiao-yun; Jin, Yong-guo] Huazhong Agr Univ, Coll Food Sci & Technol, Natl Res & Dev Ctr Egg Proc, Wuhan, Hubei, Peoples R China in 2020, Cited 39. The Name is Dimethyl 5-aminoisophthalate. Through research, I have a further understanding and discovery of 99-27-4. Computed Properties of C10H11NO4

Lipid migration is widespread in food system and has an important effect on food quality. It is urgent to explore the lipid migration in egg yolk after heating. The content of lipids in upper part (HL) was higher than that in bottom part (LL), and the lipids migration in yolk gel under heating were confirmed by MRI (T1) and T2 relaxation time of LF-NMR. Subsequently, the XDR result demonstrated the high lipid content induced the decrease in crystallinity of protein in HL part. The structures of HL part trend to be more ordered, stable (beta-sheet & beta-turns) and flat (alpha-helices) than LL part, also, more water distributed in LL part were observed by FTIR spectrum. The SEM results revealed that lipids migrated from LL to HL part, eventually lead to the protein in HL part of heated yolk gel unfold, the globular structure collapsed and become flatter. Morever, ethyl acetate, hexanal, etc. and hexanal, ethyl acetate, dimethyl-silanediol, etc. were identified as the main VOCs of LL and HL part of heated yolk gel, respectively. Lipid migration result in more lipid-specific volatiles were formed in the HL part, such as hexanal, 3-hydroxy-cyclohexanone, 2-pentyl-furan, D-limonene, 2-ethyl-1-hexanol, benzeneacetaldehyde. Lipid migration in heated yolk gel, caused by heat treatment, resulted in the changes of structure and flavor between HL and LL part.

Computed Properties of C10H11NO4. About Dimethyl 5-aminoisophthalate, If you have any questions, you can contact Xiang, XL; Liu, YY; Liu, Y; Wang, XY; Jin, YG or concate me.

Reference:
Patent; ASTRA ZENECA AB; NPS PHARMACEUTICALS, INC.; WO2004/14881; (2004); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Recently I am researching about ACID; CATALYSIS; MOFS, Saw an article supported by the Foundation for Science and Technology (FCT), PortugalPortuguese Foundation for Science and Technology [UID/QUI/00100/2019]; Instituto Superior Tecnico; FCTPortuguese Foundation for Science and TechnologyEuropean Commission [IST-ID/107/2018, IST-ID/197/2019, 57/2016]. Category: esters-buliding-blocks. Published in FRONTIERS MEDIA SA in LAUSANNE ,Authors: Karmakar, A; Paul, A; Rubio, GMDM; Soliman, MMA; Fatima, M; da Silva, CG; Pombeiro, AJL. The CAS is 99-27-4. Through research, I have a further understanding and discovery of Dimethyl 5-aminoisophthalate

A pyridine-based amide functionalized tetracarboxylic acid, 5,5 ‘-(pyridine-2, 6-dicarbonyl)bis(azanediyl)}diisophthalic acid (H4L), was synthesized and its coordination chemistry toward zinc(II) and cadmium(II) ions was studied. The reactions of H4L with Zn(NO3)(2).6H(2)O and Cd(NO3)(2).4H(2)O led to its full or partial deprotonation, respectively, and the formation of the 2D coordination polymers [Zn-2(L)(H2O)(4)](n).4n(H2O) (1) and [Cd-3(HL)(2)(DMF)(4)](n).4n(DMF) (2) (DMF = N,N’-dimethylformamide), respectively. They were characterized by elemental analysis, FT-IR, photoluminescence, thermogravimetry, and single-crystal and powder X-ray diffraction. In 1, the L4- ligand is planar with every carboxylate anion binding a Zn(II) cation and giving rise to a 2D grid with the metals with tetrahedral environments. In 2, the combination of bridging HL3- and dimethylformamide to form trinuclear Cd(II) clusters engenders secondary building block units and generates a layer-type 2D network with the metals with octahedral and pentagonal bipyramid coordination geometries. The topological analyses of 1 and 2 reveal 2,4-connected and 3,6-connected binodal nets, respectively. On account of the presence of Lewis acid (Zn or Cd centers) as well as basic (uncoordinated pyridine and amide groups) sites, 1 and (to a much lower extent) 2 effectively catalyze the one-pot cascade deacetalization-Knoevenagel condensation reactions under quite mild conditions. They act as heterogeneous catalysts, being easy to recover and recycle without losing activity.

About Dimethyl 5-aminoisophthalate, If you have any questions, you can contact Karmakar, A; Paul, A; Rubio, GMDM; Soliman, MMA; Fatima, M; da Silva, CG; Pombeiro, AJL or concate me.. Category: esters-buliding-blocks

Reference:
Patent; ASTRA ZENECA AB; NPS PHARMACEUTICALS, INC.; WO2004/14881; (2004); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

An article 3D printable robust shape memory PET copolyesters with fire safety via pi-stacking and synergistic crosslinking WOS:000476599900044 published article about FLAME-RETARDANT; EPOXY; NETWORKS; THERMO; POLYURETHANE; DEGRADATION; PYROLYSIS; MALEIMIDE; MECHANISM; STRATEGY in [Chen, Lin; Zhao, Hai-Bo; Ni, Yan-Peng; Fu, Teng; Wu, Wan-Shou; Wang, Xiu-Li; Wang, Yu-Zhong] Sichuan Univ, Natl Engn Lab Ecofriendly Polymer Mat Sichuan, Collaborat Innovat Ctr Ecofriendly & Fire Safety, State Key Lab Polymer Mat Engn,Coll Light Ind Tex, Chengdu 610064, Sichuan, Peoples R China in 2019, Cited 49. Quality Control of Dimethyl 5-aminoisophthalate. The Name is Dimethyl 5-aminoisophthalate. Through research, I have a further understanding and discovery of 99-27-4

The practical problems of insufficient mechanical strength, poor processability, tedious synthesis and flammability facing shape memory polymers have limited their further usage in industrial fields, especially in construction and aerospace. A novel and very simple method of ternary polymerization is presented here to prepare multi-functional copolyesters from general poly(ethylene terephthalate) (PET) through the new well-designed third monomer that features pendent phenylacetylene-phenylimide units. The pi-pi stacking between phenylacetylene groups as a reversible net-point not only endows the copolyesters with good shape memory and self-healability, but also reinforces the interchain interaction, leading to high tensile strength (79.6-89.6 MPa). Interestingly enough, the phenylacetylene can synergistically crosslink with the unsaturated C N group generated from the phenylimide during burning, resulting in excellent flame retardancy. Thermoplastic smart copolyesters can be designed into fire alarms and can also be used for 3D printing. The printed geometries exhibit good shape memory behaviors, which could be deformed into a small size to save space during transportation/storage and allow manufacturing freedom for space applications.

Quality Control of Dimethyl 5-aminoisophthalate. About Dimethyl 5-aminoisophthalate, If you have any questions, you can contact Chen, L; Zhao, HB; Ni, YP; Fu, T; Wu, WS; Wang, XL; Wang, YZ or concate me.

Reference:
Patent; ASTRA ZENECA AB; NPS PHARMACEUTICALS, INC.; WO2004/14881; (2004); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

HPLC of Formula: C10H11NO4. Authors Liu, BW; Zhao, HB; Chen, L; Chen, L; Wang, XL; Wang, YZ in ELSEVIER SCI LTD published article about in [Liu, Bo-Wen; Zhao, Hai-Bo; Chen, Lin; Chen, Li; Wang, Xiu-Li; Wang, Yu-Zhong] Sichuan Univ, Collaborat Innovat Ctr Ecofriendly & Fire Safety, Natl Engn Lab Ecofriendly Polymer Mat Sichuan, Sch Chem Engn,State Key Lab Polymer Mat Engn,MOE, Chengdu 610064, Peoples R China in 2021, Cited 60. The Name is Dimethyl 5-aminoisophthalate. Through research, I have a further understanding and discovery of 99-27-4

Conventional methods to improve the flame retardancy of polymeric materials usually involve the use of flame-retardant elements such as Cl, Br and P, however, their use may bring more smoke and toxic gases hazards, and more importantly, cause non-negligible environmental and ecological problems. In this work, we put forward a novel green strategy that eliminates the use of any conventional flame-retardant elements to improve the flame retardancy by incorporating a synergistically cross-linkable structure (named PN) containing phenylacetylene and phenylimide groups. The resulting PN copolymer exhibited an excellent 55% lower smoke release rate and 68% lower heat release rate than the pure polymer, as well as a high LOI value of 32% and UL-94 V-0 rating with excellent anti-dripping performance. TG-DSC, rheological and FTIR results proved the high cross-linking ability of the PN copolymer due to the synergistic cross-linking effect between the imide-isoimide rearrangement of phenylimide and the self-cross-linking of phenylacetylene. The SEM, Raman and Py-GC/MS results further upheld the condensed phase flame-retardant mechanism. This eco-friendly synergistic cross-linking strategy provided new perspective for the design and synthesis of polymeric materials with excellent flame retardancy, great anti-dripping performance, and low release of heat, smoke, and toxic gas.

HPLC of Formula: C10H11NO4. About Dimethyl 5-aminoisophthalate, If you have any questions, you can contact Liu, BW; Zhao, HB; Chen, L; Chen, L; Wang, XL; Wang, YZ or concate me.

Reference:
Patent; ASTRA ZENECA AB; NPS PHARMACEUTICALS, INC.; WO2004/14881; (2004); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics