Category: 35180-01-9

Reference of 35180-01-9, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 35180-01-9 name is Chloromethyl isopropyl carbonate, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Diesterification reaction: Under a nitrogen atmosphere, 100 g Tenofovir (PMPA) And 300ml N-methylpyrrolidone (NMP), the control temperature at 25 ~ 30 , shaking 30min, To dissolve, and then add 106g triethylamine (TEA), 20 ~ 30 shaking 30min until uniform; The above mixture was warmed to 60 ~ 65 , and stirred, In 15 ~ 20min rapid dropping 266g chloromethyl isopropyl carbonate (CMIC) Then warmed to 75 ~ 80 , shaking reaction 60 ~ 70min, When TLC real-time monitoring of the basic reaction of the reaction material completely (3% or less), and monoester content of 15% or less, When the area of the main peak of the product is more than 80%, the double esterification reaction is complete; Then the reaction system first use water bath cooling 5min, After using ice-water bath in 10-15 min the reaction system rapidly reduced to 10-15 ;Extraction and Separation: To the reaction system in step (1) was added 600 ml of ethyl acetate (EA) Heated at 10 ~ 15 , stirred for 15min and filtered, each time with 200ml ethyl acetate (EA) washed the filter cake three times, And the filtrate and the resulting filtrate was combined, to which was added 400ml 10 ~ 15 distilled cold water, Full shock, extraction and separation, the separated aqueous phase was extracted with ethyl acetate twice, The resulting organic phase was combined with the EA layer, washed twice with 1000 ml of distilled water, 300g of sodium chloride was added into the obtained water washing solution twice, dissolved with stirring and cooled down to 10 to 15 C, And then extracted with 500ml of ethyl acetate once, the organic phase was extracted and combined, Washed with 900 to 1000 ml of saturated saline (300 g of sodium chloride dissolved in 850 ml of distilled water) Finally, the organic phase was added 400g anhydrous sodium sulfate 60min after drying filtration;Salt-forming reaction: to step (2) dried and filtered about 2000ml filtrate was added to the reaction vessel, Then 32g fumaric acid (FMA) was added and the temperature was raised to 40 C in a nitrogen atmosphere and the reaction was stirred until the solution became clear. (4) Preparation of tenofovir disoproxil fumarate crude product: Step (3) The reaction solution was concentrated under reduced pressure at 40 C, most of the solvent was distilled off until a large amount of crystals were precipitated, Then the concentrate was naturally cooled to room temperature, and then placed in a -5 C freezer was allowed to cool more than 2h, filtered, The resulting filter cake was washed with a small amount of ethyl acetate 2 to 3 times, pumping dry weighed about 130g, 40 under blast drying 2h, weighed to give 85g Tenofovir disoproxil fumarate crude product, The HPLC detector purity of 98% or more;Recrystallization: Under a nitrogen atmosphere, the reaction vessel was charged with step (4) 85 g crude Tenofovir disoproxil fumarate and 500 ml isopropanol (IPA) The nitrogen atmosphere was warmed to 55 C and stirred for 15 min to clarify the solution. If not, the filtrate should be filtered and the filtrate rapidly crystallized. After the resulting solution was left to cool to room temperature, Placed in a freezer at 4 frozen 2h above, so recrystallized, filtered, rinsed with cold isopropyl alcohol cake, Drained, to obtain white wet crystal 108g, at 40 blast drying 2h or 40 under reduced pressure drying 4h, 72 g of tenofovir disoproxil fumarate finished product was obtained. Tenofovir disoproxil fumarate obtained by the above method was tested by HPLC, Its purity is higher than 99.5%, monoester is less than 0.5%, the sum of other impurities is not more than 0.1%, with tenofovir, The total molar yield is about 35-40%.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Chloromethyl isopropyl carbonate, and friends who are interested can also refer to it.

Reference:
Patent; Jiangsu Han Sitong Pharmaceutical Co., Ltd.; Wang Duoping; Wei Genghu; Shi Jiagui; Yang Yu; (7 pag.)CN107400145; (2017); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Synthetic Route of 35180-01-9,Some common heterocyclic compound, 35180-01-9, name is Chloromethyl isopropyl carbonate, molecular formula is C5H9ClO3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

In 1000 ml reaction flask by adding 400 ml acetonitrile, 50mlNMP and 40g tynofovir a water composition, stirring is opened, to control the temperature to 20 C dropping under 67g triethylamine, drops to continue dropping 100g chloro methyl isopropyl carbonate, the reaction system after the dipping temperature is increased to 50 C insulation reaction 8 hours, the detection reaction monoester less than 10%, in the reaction liquid 40 C the following concentrate under reduced pressure until there is no liquid can flow out, in the concentrated residual liquid by adding 500 ml ethyl acetate, 200ml6% of sodium bicarbonate solution, stir layered after extraction, the organic phase continue to use 200 ml purified water washing two times, the resulting organic phase after drying by anhydrous sodium sulfate concentrated under reduced pressure to dry, the resulting concentrated residual liquid directly used for the next reaction.

The synthetic route of 35180-01-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Suzhou Homesun Pharmaceutical Co., Ltd.; Fan, Chao; (7 pag.)CN105418684; (2016); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 35180-01-9, name is Chloromethyl isopropyl carbonate, A new synthetic method of this compound is introduced below., Formula: C5H9ClO3

Tenofovir (60 g, 0.209 mol) was placed in a 500 ml four-necked flask.250 g of N-methylpyrrolidone, and triethylamine (62.3 g, 0.617 mol) was added with stirring.Additional tetrabutylammonium bromide (40.25 g, 0.125 mol) was added.Warming up to 50 C,At this temperature, chloromethyl isopropyl carbonate (63.5 g, 0.418 mol) was added dropwise.Investment,Keep warm for 5 to 10 hours,After the end of the heat preservation, after extracting twice with n-heptane 250 ml¡Á2, the water was separated into 480 g of purified water, and extracted three times with isopropyl acetate 240 g+120 g+120 g, and the isopropyl acetate solution was combined and washed twice with an aqueous solution of 180 g¡Á2. , concentrated to dryness under reduced pressure at 40 C, 60 g of isopropanol, 40 CConcentrated to dryness under reduced pressure, adding 100 g of isopropanol, heating and dissolving, cooling to -10 to -20 C, adding 0.5 g of seed crystals, keeping for 2-8 hours, suction filtration,The wet product was dried at 40 C under reduced pressure to obtain tenofovir (99.28 g).Yield 91.5%The purity is 98.3%.

The synthetic route of 35180-01-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Zhejiang Jiuzhou Pharmaceutical Co., Ltd.; Ye Meiqi; Xu Jiankang; Wu Hao; Chen Linguo; Ye Kai; (17 pag.)CN104974188; (2019); B;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

35180-01-9, Adding a certain compound to certain chemical reactions, such as: 35180-01-9, name is Chloromethyl isopropyl carbonate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 35180-01-9.

41.4 g of Tenofovir monohydrate (commercially available or prepared as disclosed in CN1264387A) was added to 164 g of N-methylpyrrolidone at 20~25 C.,Then added under stirring triethylamine 40g, 20 ~ 25 C under stirring for 0.5 hours,Chloromethyl isopropyl carbonate was added 100g, warmed to 55-65 C incubated for 5 hours;Stop heating, cooling to 20 ~ 30 C, adding ethyl acetate 320g, purified water 180g,0 ~ 5 C under stirring after the separation, the lower layer and then 110g of ethyl acetate at 0 ~ 5 C under extraction,Combined ethyl acetate layer, purified water 0 ~ 5 C washed twice, each 320g,30 ~ 35 C concentrated ethyl acetate; cyclohexane was added to the concentrate 150mL,20 ~ 25 C under stirring for 10 hours, filtered, cyclohexane 20mL rinse,Tenofovir disoproxil, white solid.

According to the analysis of related databases, 35180-01-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Sichuan Hai Sike Pharmaceutical Co., Ltd.; Pan Xusong; Xiao Ning; Wang Yong; Xiang Zhixiang; Lu Chongyu; Jia Xiaoman; Luo Jie; Zheng Wei; (74 pag.)CN103626803; (2017); B;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

35180-01-9,Some common heterocyclic compound, 35180-01-9, name is Chloromethyl isopropyl carbonate, molecular formula is C5H9ClO3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of chloromethyl isopropyl carbonate (5.02 g, 32.77 mmol) in MeCN (20mL) was added Nal (14.74 g, 98.31 mmol). The reaction mixture was stirred at 60 00 for 3 hr. Themixture was then concentrated and the residue was dissolved in DCM (300 mL). The resulting mixture was washed with sat. Na25203 (100 mLx2), and the organic phase was dried and concentrated to give 22.2 (7.90 g, 99% yield). 1H NMR (400 MHz, 0D013): oe5.95 (s, 2H), 4.96 (m, 1H), 1.33 (d, J= 6.4 Hz,6H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Chloromethyl isopropyl carbonate, its application will become more common.

Reference:
Patent; UNITY BIOTECHNOLOGY, INC.; BACKES, Bradley; W. VON GELDERN, Thomas; CHEN, Bing; (121 pag.)WO2017/101851; (2017); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

A common heterocyclic compound, 35180-01-9, name is Chloromethyl isopropyl carbonate, molecular formula is C5H9ClO3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 35180-01-9.

2-butyl-4-chloro-1-[2′-(1H-tetrazol-5-yl)1,1′-biphenyl-methyl]imidazole-5-carbo xylic acid (prepared by the method disclosed in) was reacted with trityl chloride to obtain 2-butyl-4-chcloro-1-[2′-(1-triphenylmethyl-tetrazol-5-yl)1,1′-biphenyl-methyl]imidazol e-5-carboxylic acid. To a 100 ml of one-necked flask, 0,523 g of 2-butyl-4-chloro-1-[2′-(1-triphenylmethyl-tetrazol-5-yl)1,1′-biphenyl-methyl]imidazol e-5-carboxylic acid, 0 124 g of potassium carbonate, and 5 ml of N,N-dimethylacetamide were added in turn The solution was stirred at the room temperature for 20 minutes. Then 0.562 g of 1-chloromethyl isopropyl carbonate was added and the mixture was reacted at 45 – 50 C for 16 h. After the reaction was completed, the mixture solution was filtered, and 30 ml of water was added into the filtrate. The resulting mixture was extracted with 30 ml of ethyl acetate twice. The organic phase was dried and concentrated to give 1.724 g of oil, which was directly used in the next reaction without purification

The synthetic route of Chloromethyl isopropyl carbonate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SHANGHAI ALLIST PHARMACEUTICAL., INC.; EP2103610; (2009); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

35180-01-9, These common heterocyclic compound, 35180-01-9, name is Chloromethyl isopropyl carbonate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Preparation of Compound 165Compound 165. A 20 mL microwave vial was charged with starting acid (300 mg, 0.632 mmol), potassium carbonate (1 14 mg, 0.822 mmol), sodium iodide (66.3 mg, 18.1 mu, 0.442 mmol), DMF (10 mL) and chloromethyl isopropyl carbonate (116 mg, 0.758 mmol). Heated at 80 C in microwave for 20 min, then the reaction mixture was partitioned between EtOAc and water (80 mL each). The organic layer was separated, washed with water then brine (80 mL each), dried (magnesium sulfate), filtered and concentrated. The resulting residue was purified by MPLC using an Isco Combiflash (40 g column) 0-80% EtOAc in hexanes linear gradient over 24 column volumes at 40 mL/min. Product isolated from column was dissolved in MeCN (10 mL), treated with water (8 mL) then the resulting mixture was frozen and lyophilized. Gave 166 (291 mg, 0.479 mmol, 76%) as a white solid. Analysis carried out by LCMS (60-98% aqueous MeCN, formic acid modifier, 7 min, C4) ESI-MS m/z calc. 590.2662, found 591.59 (M+l)+; Retention time: 2.59 minutes. 1H NMR (300.0 MHz, DMSO) delta 7.27 (s, 1H), 5.84 (dd, J = 6.2, 9.7 Hz, 2H), 4.91 (d, J = 16.7 Hz, 1H), 4.80 (septet, J = 6.2 Hz, 1H), 3.89 (d, J = 16.7 Hz, 1H), 3.55 (br s, 4H), 3.45 – 3.35 (m, 4H), 2.13 – 1.98 (m, 1H), 1.79 – 1.33 (m, 7H), 1.30 (s, 9H), 1.24 (d, J = 6.2 Hz, 6H), 0.77 (d, J = 6.4 Hz, 3H) and 0.75 – 0.57 (m, 2H) ppm.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 35180-01-9.

Reference:
Patent; VERTEX PHARMACEUTICALS INCORPORATED; GREEN, Jeremy; WILSON, Dean, M.; KONG, Laval, Chan Chun; DAS, Sanjoy, Kumar; POISSON, Carl; COURT, John, J.; TANG, Qing; LI, Pan; COLLIER, Philip, N.; WAAL, Nathan; LAUFFER, David, J.; DORSCH, Warren; WO2012/6055; (2012); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

A common heterocyclic compound, 35180-01-9, name is Chloromethyl isopropyl carbonate, molecular formula is C5H9ClO3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 35180-01-9.

Example 1 2-butyl-4-chloro-1-[2′-(1H-tetrazol-5-yl)1,1′-biphenyl-methyl]imidazole-5-carboxylic acid, 1-[(isopropoxycarbonyl)oxy]methyl ester (compound 1) 2-butyl-4-chloro-1-[2′-(1H-tetrazol-5-yl)1,1′-biphenyl-methyl]imidazole-5-carboxylic acid (prepared by the method disclosed in U.S. Pat. No. 5,138,069) was reacted with trityl chloride to obtain 2-butyl-4-chloro-1-[2′-(1-triphenylmethyl-tetrazol-5-yl)1,1′-biphenyl-methyl]imidazole-5-carboxylic acid. To a 100 ml of one-necked flask, 0.523 g of 2-butyl-4-chloro-1-[2′-(1-triphenylmethyl-tetrazol-5-yl)1,1′-biphenyl-methyl]imidazole-5-carboxylic acid, 0.124 g of potassium carbonate, and 5 ml of N,N-dimethylacetamide were added in turn. The solution was stirred at the room temperature for 20 minutes. Then 0.562 g of 1-chloromethyl isopropyl carbonate was added and the mixture was reacted at 45-50 C. for 16 h. After the reaction was completed, the mixture solution was filtered, and 30 ml of water was added into the filtrate. The resulting mixture was extracted with 30 ml of ethyl acetate twice. The organic phase was dried and concentrated to give 1.724 g of oil, which was directly used in the next reaction without purification. 10 ml of dioxane and 5 ml of 4 mol/L HCl were added, and the resulting mixture was reacted at the room temperature for 16 h. After the reaction was completed, the solution was adjusted to pH 6-7 using aqueous sodium bicarbonate solution. The solution became turbid, and was extracted with ethyl acetate. The organic phase was washed with saturated brine, dried, concentrated to give 0.436 g of 2-butyl-4-chloro-1-[2′-(1H-tetrazol-5-yl)1,1′-biphenyl-methyl]imidazole-5-carboxylic acid, 1-[(isopropoxycarbonyl)oxy]methyl ester. 1H-NMR: (CDCl3) deltaH (ppm): 0.89 (t, 3H, J=14.6), 1.24 (d, 6H, J=6.3), 1.37 (m, 2H, J=22.1), 1.69 (m, 2H, J=30.5), 2.64 (t, 2H, J=15.5), 4.81 (m, 1H, J=12.4), 5.54 (s, 2H), 5.86 (s, 2H), 6.95-7.64 (8H), 8.08 (d, 1H, J=7.42) ESI (+) m/z: 552.7

The synthetic route of Chloromethyl isopropyl carbonate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Guo, Jianhui; An, Dong; US2009/326024; (2009); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

A common heterocyclic compound, 35180-01-9, name is Chloromethyl isopropyl carbonate, molecular formula is C5H9ClO3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 35180-01-9.

S03 condensation: After pretreating the crude tenofovir obtained in the step S02, and stirring 16 L of N-methylpyrrolidone and 4.44 kg of triethylamine, the temperature is raised to 50 C and stirred.11.15 kg of isopropyl chloromethyl carbonate was added dropwise, stirred, and the reaction was completely cooled and quenched.After cooling, add 12 L of cyclohexane twice, stir, centrifuge, layer, and discard the upper layer of cyclohexane. The lower layer of the filtrate was transferred to a reaction kettle, and 30 L of water and 20 L of ethyl acetate were added.After stirring for 30 minutes, the layers were allowed to stand, and the aqueous layer was extracted with 10 L of ethyl acetate.Wash with 20L of 10wt% brine, add 1.0kg anhydrous sodium sulfate, stir dry, centrifuge,The filtrate is transferred to the transfer reactor in batches, concentrated under reduced pressure, and the concentrate is transferred to the reaction vessel.Denotefovir dipivoxilCrude.

The synthetic route of Chloromethyl isopropyl carbonate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Shandong Kexing Biological Products Co., Ltd.; Hao Zhihai; Wang Cuicui; Lu Fuxin; Guo Chao; Wang Jun; Zhang Yun; Qiu Duxian; Cui Ning; (26 pag.)CN108409789; (2018); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

35180-01-9, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 35180-01-9, name is Chloromethyl isopropyl carbonate, A new synthetic method of this compound is introduced below.

400 ml of ethanol, 50 ml of dimethylacetamide and 40 g of tenofovir monohydrate were added to a 1000 ml reaction flask,Stirring, control the temperature of 20 C dropwise add 85g of N, N-diisopropylethylamine, drop finished to continue dropping 100g chloromethyl carbonateThe reaction system was heated to 50 C for 8 hours and the monoester was detected to be less than 10%. The reaction solution was concentrated under 40 C under reduced pressure until no liquid flowed out and concentrated to the residue 500 ml of ethyl acetate, 200 ml of a 6% solution of sodium hydrogencarbonate,After stirring, the layers were extracted and the organic phase was washed twice with 200 ml of purified water,The obtained organic phase was dried over anhydrous sodium sulfate and concentrated to dryness under reduced pressure,The resulting concentrated residue was used directly in the next step.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Suzhou Homesun Pharmaceutical Co., Ltd.; Fan, chao; (7 pag.)CN105418683; (2016); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics