Author: Jessica.F

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 2459-25-8, name is Methyl 2-naphthoate, A new synthetic method of this compound is introduced below., Formula: C12H10O2

Under a nitrogen atmosphere,Dissolve 50 g of methyl naphthalene-2-carboxylate in 350 mL of tetrahydrofuran.In a three-necked flask, the temperature of the system was reduced to -10C with liquid nitrogen.A 2mol/L solution of lithium diisopropylamide in tetrahydrofuran was added to the reaction system, wherein the volume of lithium diisopropylamide was 173.6mL, and then the temperature was raised to 20C and kept warm for 3 hours and then lowered to -80C and 87g was added. 1,2-Dibromoethane was reacted at -80C for 0.5 h, then allowed to stand at room temperature. The reaction solution was poured into a mixture of 500 mL of ethyl acetate and 2000 mL of a 10% volume aqueous solution of hydrochloric acid.After stirring for 10 minutes, let stand for 0.5h and discard the lower aqueous phase.The organic layer obtained from the upper layer was dried with 40 g of anhydrous sodium sulfate for 0.5 h.After filtration, the filtrate was distilled under reduced pressure at 45 C and -0.08 MPa until no solvent flowed out.The crude product of 3-bromonaphthalene-2-carboxylic acid methyl ester was obtained 69 g ,The crude product was added to 517 mL of ethanol and heated to reflux at 45 C. for 2 h.Then it was cooled to 0C for 1 h, filtered, and the filter cake was dried at 50C for 2 h.Obtained 66.5 g of 3-bromonaphthalene-2-carboxylic acid methyl ester, yield 93.5%, purity >98%.

The synthetic route of 2459-25-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Shanxi Laite Optoelectric Materials Co., Ltd.; Liu Ruigang; Zhang Wen; Li Jian; Li Lingang; Xue Zhen; Wang Yalong; (7 pag.)CN107602381; (2018); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 87661-20-9, name is tert-Butyl cyclopropanecarboxylate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of tert-Butyl cyclopropanecarboxylate

15.9 ml (1.15 equiv.) diisopropylamine were dissolved in 65 ml tetrahydrofuran and cooled to ca -10 C. 65 ml (1.08 equiv.) 1.6 M butyllithium solution in hexane were added over 25 min, maintaining the temperature between -10 C. and 0 C. After 50 nm in at ca. -5 C., the reaction mixture was cooled to -75 C. A solution of 15 g (96.7 mmol, 1 equiv., 92% w/w purity) cyclopropanecarboxylic acid tert-butyl ester in 20 ml tetrahydrofuran was added over 15 min keeping the temperature between -75 C. and -70 C. The reaction mixture was stirred 5 h at -75 C. (milky reaction mixture obtained after 2.5 h). A solution of 12.87 g (1.10 equiv.) allyl bromide was added over 20 min keeping the temperature between -75 C. and -60 C. The reaction mixture was stirred at -78 C. for 1 h, warmed to room temperature and stirred overnight. The reaction mixture was cooled to 0 C. 100 ml sat. aq. ammonium chloride solution were added followed by 30 ml water providing a clear biphasic mixture. The mixture was extracted 3 times with 50 ml tert-butyl methyl ether. The organic phases were combined, dried over sodium sulfate, filtered and concentrated under reduced pressure (40 C./20 mbar) to afford 16.44 g of crude product. The crude product was distilled (2 mbar; ca 40 C. distillation head temperature) to provide the title compound in ca 65% yield.

The synthetic route of 87661-20-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Aebi, Johannes; Binggeli, Alfred; Green, Luke; Hartmann, Guido; Maerki, Hans P.; Mattei, Patrizio; Ricklin, Fabienne; US2009/23713; (2009); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Synthetic Route of 80051-07-6, These common heterocyclic compound, 80051-07-6, name is Methyl 4-(1-aminoethyl)benzoate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a stirred solution ofthe corresponding amine (2 mmol) in anhydrous CH2Cl2 containing drytriethylamine (5 mmol) a solution of 3 or 15a-c (2.5 mmol) in anhydrousCH2Cl2 (5 mL) was added dropwise over 15 min at 0 C. Afterstirred for another 5 h at room temperature, water was added, and themixture was extracted with CH2Cl2. The combined organic phase wasdried (Na2SO4) and filtered to obtain the crude products, which werepurified by column chromatography using silica gel and a CH2Cl2/MeOH mixture. (CH2Cl2: MeOH=100:1)

Statistics shows that Methyl 4-(1-aminoethyl)benzoate is playing an increasingly important role. we look forward to future research findings about 80051-07-6.

Reference:
Article; Hu, Jinhui; An, Baijiao; Pan, Tingting; Li, Zhengcunxiao; Huang, Ling; Li, Xingshu; Bioorganic and Medicinal Chemistry; vol. 26; 21; (2018); p. 5718 – 5729;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 40637-56-7, name is Dimethyl 2-allylmalonate, A new synthetic method of this compound is introduced below., Application In Synthesis of Dimethyl 2-allylmalonate

General procedure: A 50 mL Schlenk tube containing NaH (60% in mineral oil, 240 mg, 6 mmol)was evacuated and filled with argon (3x). THF (10 mL) was added and thesuspension was cooled in ice/water bath. Appropriately substituted dimethyl(allyl)malonate (5 mmol) was added dropwise (caution, hydrogen evolution),then cooling bath was removed and the reaction mixture was stirred at rt for 30min. Then substituted propargil bromide or methanesulfonate (6 mmol) wasadded and the reaction mixture was stirred at rt for 1h. The mixture wasquenched with NH4Cl(aq.) (20 mL) and extracted with MTBE (3 × 20 mL). Combined organic extractswere dried (Na2SO4), concentrated and crude product was purified by column chromatography onsilica gel (50 g column, 98:2 ? 95:5 hexanes/EtOAc).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Kocoj, Ma?gorzata; Jarosi?ska, El?bieta; Cha?adaj, Wojciech; Synlett; vol. 29; 10; (2018); p. 1319 – 1323;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 2672-58-4, name is Trimethyl benzene-1,3,5-tricarboxylate, This compound has unique chemical properties. The synthetic route is as follows., Product Details of 2672-58-4

Synthesis of 1,3,5-Tris(hydroxymethyl)benzene (50)(Y. Yamaqiwa, Y. Koreishi. S. Kivozumi, M. Kobavashi, T. Kamikawa, M. Tsukino, H. Goi M. Yamamaoto, M. Munakata. Bull. Chem. Soc. Jpn. 1996, 69, 3317-3323; J. Houk, G. Whitesides. J. Am. Chem. Soc. 1987, 109, 6825-6836) A solution of 1,3,5-tris(methoxycarbonyl)benzene (10.09 g, 40 mmol) in dry THF (400 ml) was added over a period of 3h to a suspension of LiAlH4 (4.03 g, 0.1 mol) in dry THF (300 ml) under N2. After stirring over night at room temperature, the reaction mixture was cooled to 0 C., hydrolyzed with water (4 ml), 2M NaOH (4 ml) and water (12 ml), filtered, and the filter cake washed thoroughly with THF. The combined filtrates were concentrated and the crude product was recrystallized from hot (not boiling) ethanol to afford 50(5.59 g, 83%) as white needles; mp 76-77 C. (lit. 77-78 C.) 1H NMR (300 MHz, DMSO-d6) delta4.49 (d, 3H, J4.8 Hz, CH2), 5.30 (t, 1H, J5.4 Hz, OH), 7.14 (s, 1H, aromat. H).

According to the analysis of related databases, 2672-58-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Davis, Benjamin G.; Jones, John Bryan; Bott, Richard R.; US2002/19039; (2002); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Application of 25415-67-2,Some common heterocyclic compound, 25415-67-2, name is Ethyl 4-methylpentanoate, molecular formula is C8H16O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Ethyl 4-methyl valerate (1.20 g, 8.3 mmol) was added to LDA (M, 9.0 mL, 9.0 mmol) in dry THF (20 mL) at -78 C. under an argon atmosphere. After 50 mins ALA iodide (2.0 g, 5.34 mmol) [as made in Example 1, Part 3] in HMPA (5 ML) was added dropwise. The reaction mixture was stirred for 4 hours at -78 C. and then was quenched with saturated ammonium chloride solution (20 mL), and the cooling bath was removed. Once the reaction reached RT, the product was extracted with diethyl ether (2*25 mL). The combined ether extracts, were washed with water. Toluene (20 mL) was added and the solution was dried over sodium sulfate, filtered, and concentrated. The remaining oil (2.8 g) was purified by column chromatography on silica gel (75 g), eluting with 100% heptane followed by 1% ethyl acetate in heptane. The experiment generated 2-isobutyl-eicosa-11,14,17-trienoic acid ethyl ester 12 (1.4 g, 70% yield) as a colorless oil. 1H NMR (300 MHz, CDCl3/TMS): delta 5.36 (m, 6H), 4.10 (q, 2H, J=6.9 Hz), 2.79 (m, 4H), 2.38 (m, 1H), 2.10-1.98 (m, 4H), 1.1.53 (m, 1H), 1.40-1.25 (m, 10H), 1.00-0.82 (m, 12H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Ethyl 4-methylpentanoate, its application will become more common.

Reference:
Patent; Jiva Pharma Inc.; Goel, Om P; (18 pag.)US10125078; (2018); B1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Reference of 59227-79-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 59227-79-1, name is Ethyl 4-(4-chlorophenoxy)butanoate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Step 1 : To a solution of ethyl-4-(4-chlorophenoxy)butanoate (6.0 g, 24.721 mmol, 1 .0 equiv) in dry tetrahydrofuran (10 mL) was added lithium diisopropylamide solution (2.0 M in THF/heptane/ethylbenzene (18.5 mL, 4.944 mmol, 1 .5 equiv) slowly at -78 C. The reaction mixture was stirred for 2 h at -78 C. A solution of carbon tetrabromide (12.3 g, 37.083 mmol, 1 .5 equiv) in dry tetrahydrofuran (15 mL) was added at -78 C and the reaction was stirred for 10 min and was then allowed to stir at room temperature for 1 h. The mixture was then quenched with a saturated aqueous ammonium chloride solution (100 mL) and extracted with ethyl acetate (3 x 100 mL). The combined organic layer was dried over anhydrous sodium sulfate, filtered and concentrated. The crude product was purified by flash column chromatography using a silica gel column and the product eluted at 2% ethyl acetate in hexane to yield ethyl-2-bromo-4-(4-chlorophenoxy)butanoate (0.6 g crude, 7.59 % yield) as a gum. NMR (400 MHz, CDCI3): delta ppm 1 .30 (t, J = 7.2 Hz, 3 H), 2.34 – 2.43 (m, 1 H), 2.52 – 2.61 (m, 1 H), 4.04 – 4.13 (m, 2 H), 4.22 – 4.28 (m, 2 H), 4.52 – 4.56 (m, 1 H), 6.81 (d, J = 8.8 Hz, 2 H), 7.23 (d, J = 8.8 Hz, 2 H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Ethyl 4-(4-chlorophenoxy)butanoate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY DEVELOPMENT LIMITED; CHEUNG, Mui; DEMARTINO, Michael P.; KALITA, Biswajit; KRISTAM, Rajendra; (128 pag.)WO2019/8507; (2019); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Electric Literature of 113100-86-0, A common heterocyclic compound, 113100-86-0, name is Methyl 4-(3-bromopropyl)benzoate, molecular formula is C11H13BrO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step D: 4-(3-{2-[3-(tert-Butyl-dimethyl-silanyloxy)-4-(3-phenoxy-phenyl)-butyl]-5-oxo-pyrrolidin-1-yl}-propyl)-benzoic acid methyl ester. Analogous to the procedure described for Example 1A, Step D, 5-[3-(tert-butyl-dimethyl-silanyloxy)-4-(3-phenoxy-phenyl)-butyl]-pyrrolidin-2-one (200 mg, 0.455 mmol) was alkylated with NaHMDS (1M in THF, 0.55 mL, 0.55 mmol) and 4-(3-bromo-propyl)-benzoic acid methyl ester (128 mg, 0.501 mmol) to yield 4-(3-{2-[3-(tert-butyl-dimethyl-silanyloxy)-4-(3-phenoxy-phenyl)-butyl]-5-oxo-pyrrolidin-1-yl}-propyl)-benzoic acid methyl ester (173.1 mg). 1H NMR (CDCl3) delta7.94 (d, 2H), 7.32 (m, 2H), 7.25-7.19 (m, 3H), 7.09 (m, 1H), 6.98 (d, 2H), 6.88-6.81 (m, 3H), 3.88 (s, 3H), 3.84 (m, 1H), 3.64 (m, 1H), 3.50 (m, 1H), 2.95 (m, 1H), 2.76-2.57 (m, 4H), 2.37 (m, 2H), 2.03 (m, 1H), 1.92-1.67 (m, 3H), 1.56 (m, 1H), 1.46-1.25 (m, 3H), 0.84 (s, 9H), -0.04 (d, 3H), -0.15 (d, 3H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Cameron, Kimberly O.; Lefker, Bruce A.; US2002/65308; (2002); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 39552-81-3, name is Methyl 2-(4-aminophenyl)acetate, A new synthetic method of this compound is introduced below., Product Details of 39552-81-3

A solution of chloride 19 (992 mg, 5 5 mmol) and aniline 50 (1.99 g, 12.0 mmol) in DMSO (30 mL) was heated at 100 C for 6 h and then 20 C for 16 h. The solution was partitioned between EtOAc (200 mL) and water (200 mL), the organic fraction washed with water (2 x 100 mL), dried, and the solvent evaporated. The residue was chromatographed, eluting with 10% EtOAc/DCM, to give the 1-oxide 51 (1.05 g, 61%) as a yellow solid, mp (EtOAc/DCM) 216-218 C; 1H NMR [(CD3)2SO] delta 10.00 (s, 1 H, NH), 8.24 (d, J = 8 3 Hz, 1 H, H-8″), 7.82 (d, J = 8.4 Hz, 2 H, H-2′, H-6′), 7.79 (dd, J = 8.2, 7.3 Hz, 1 H, H-6″), 7.70 (d, J = 8 2 Hz, 1 H, H-5″), 7.40 (dd, J = 8.3, 7.3 Hz, 1 H, H-7″), 7.22 (d, J = 8 4 Hz, 2 H, H-3′, H-5′), 3.67 (s, 3 H, OCH3), 3.60 (s, 2 H, H-2), 13C NMR [(CD3)2SO] delta 171.7 (C-1), 156.3 (C-3″), 147.9 (C-4a”), 138.1 (C-4′), 135.6 (C-6″), 131.9 (C-8a”), 129.4 (C-2′, C-6′), 128.3 (C-1′), 126.7 (C-5″), 125.5 (C-7″), 119.9 (C-8″), 119.7 (C-3′, C-5′), 51.7 (OCH3), 40.1 (C-2); Anal. calc. for C16H14N4O3: C, 61 9; H, 4.6; N, 18.1; found C, 62 3; H, 4.8; N, 18.1 %.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Auckland Uniservices Limited; EP1468688; (2004); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 14062-29-4, name is Ethyl 2-(3-chlorophenyl)acetate, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 14062-29-4

Part A: Diethyl 2-oxo-3-(3-chlorophenyl)succinate. This compound is prepared according to the method of Klioze and Ehrgott (U.S. Pat. No. 4,216,218) from diethyl oxalate and ethyl (3-chlorophenyl)acetate.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 14062-29-4.

Reference:
Patent; Moorman, Allan R.; Romagnoli, Romeo; Baraldi, Pier Giovanni; US2003/73733; (2003); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics