Author: Jessica.F

Reference of 114312-57-1, A common heterocyclic compound, 114312-57-1, name is Ethyl 3-fluoro-2-methylbenzoate, molecular formula is C10H11FO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Add ethyl 3-fluoro-2-methylbenzoate (5.1g, 28mmol) to the reaction flask,N-bromosuccinimide (5.6g, 31mmol),Benzoyl peroxide (0.34g, 1.4mmol) and CCl4 (30mL).Under the protection of nitrogen, the temperature of the reaction solution was raised to 82C and the reaction was stirred for 17 hours.After the reaction was completed, the reaction solution was cooled to room temperature, filtered, and the filter cake was washed with EtOAc (50 mL). The resulting filtrate was sequentially saturated sodium thiosulfate solution (100 mL×2),The citric acid solution (50 mL) and saturated brine (50 mL) were washed, dried over anhydrous sodium sulfate, filtered, and the filtrate was vortexed under reduced pressure.The obtained crude product was purified using silica gel column chromatography (eluent: PE/EA (v/v) = 10/1),The title compound was obtained as a light yellow oil (6.17g, 84%).

The synthetic route of 114312-57-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Luo Huichao; Ren Qingyun; Yin Junjun; Wu Chunlin; Fan Yuxin; Mo Yufeng; Zhang Yingjun; (102 pag.)CN111057074; (2020); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 217314-47-1, name is Methyl 3-amino-5-methoxybenzoate, A new synthetic method of this compound is introduced below., Recommanded Product: 217314-47-1

To the solution of 1.57 g (8.7 mmol, 1 eq) 3-amino-5-methoxy-benzoic acid methyl ester (CAS 217314-47-1, can be prepared according to literature procedures) and 0.11 g (0.87 mmol, 0.1 eq) 4-dimethylaminopyridine in 18 ml THF is added the solution of 1.89 g (8.7 mmol, 1 eq) BOC-anhydride in 7 ml THF. The reaction mixture is stirred at rt over night. After dilution with EtOAc the mixture is washed with aqueous sodium bicarbonate and brine, dried over sodium sulfate, and the solvents are evaporated at reduced pressure. The residue is purified by chromatography on silica (flashmaster, hexane to hexane/EtOAc 7/3) to give 0.83 g (2.9 mmol, 34%) product as white solid.MS (LC/MS): 182=[M+H]+ 1H-NMR (400 MHz, CDCl3): 7.54-7.51 (m, 1H), 7.39 (br s, 1H), 7.29-7.28 (m, 1H), 6.59 (br s, 1H), 3.93 (s, 3H), 3.87 (s, 3H), 1.56 (s, 9H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Betschart, Claudia; Lerchner, Andreas; Machauer, Rainer; Rueger, Heinrich; Tintelnot-Blomley, Marina; Veenstra, Siem Jacob; US2008/132477; (2008); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Related Products of 37746-78-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 37746-78-4 name is (E)-Ethyl 4-bromobut-2-enoate, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: To a vigorously stirring solution of alpha-imino ester 1 (0.5 mmol,1 equiv) and E-ethyl-4-bromocrotonate or methyl-4-bromocrotonate (2, 1.5 mmol, 3 equiv) in EtOH (2 mL) was added indium powder (1 mmol, 2 equiv). The mixture was allowed to stir vigorously for 6 h at 30 C. After this period, the reaction mixturewas quenched with 2 mL of water and transferred to a separating funnel and extracted using ethyl acetate (315 mL). The combined organic layers were dried over anhydrous Na2SO4. Then the solvent was evaporated under vacuum. Purification of the resulting crude reaction mixture by column chromatography on silica gel (EtOAc/Hexane as eluent) gave the product 3 (see Tables 1 and 2 and Scheme 2 for individual entries).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, (E)-Ethyl 4-bromobut-2-enoate, and friends who are interested can also refer to it.

Reference:
Article; Aslam, Nayyar Ahmad; Babu, Srinivasarao Arulananda; Sudha, Arya Jayadev; Yasuda, Makoto; Baba, Akio; Tetrahedron; vol. 69; 32; (2013); p. 6598 – 6611;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 154825-97-5, name is Methyl 2-(4-bromophenyl)-2,2-dimethylacetate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 154825-97-5, COA of Formula: C11H13BrO2

To a suspension of lithium aluminum hydride (2.95 g, 78 mmol, 2 equiv.) in THF (70 mL) at 0C was added a solution of methyl 2-(4-bromophenyl)-2-methylpropanoate (10 g, 39 mmol, 1 equiv.) in THF (60 mL) dropwise. After stirring at 0C for 1 h, the reaction was quenched sequentially with 3 mL of water, 9 mL of a 5% sodium hydroxide solution and 3 mL of water. It was filtered on a Celite pad using ether as an eluent. The solvent was evaporated and the residue was purified by bulb-to-bulb distillation (2-4 mbar, l30C) to afford 2-(4-bromophenyl)-2-methylpropan-l-ol (8.27 g, 93% yield).1H NMR: 1.30 (s, 6H), 3.57 (s, 2H), 7.25 (d, J = 8.6 Hz, 2H), 7.45 (d, J = 8.6 Hz, 2H).13C NMR: 145.6 (s), 131.4 (d, 2C), 128.2 (d, 2C), 120.1 (s), 72.8 (t), 39.9 (s), 25.2 (q,2C).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Methyl 2-(4-bromophenyl)-2,2-dimethylacetate, and friends who are interested can also refer to it.

Reference:
Patent; FIRMENICH SA; COULOMB, Julien; ODDON, Gilles; (33 pag.)WO2019/141761; (2019); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Related Products of 541-16-2, A common heterocyclic compound, 541-16-2, name is Di-tert-Butyl malonate, molecular formula is C11H20O4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 1: Preparation of 2-ethylcyclopropane-1,1-dicarboxylic acid di-tert-butyl ester, shown below To a suspension of benzyltriethylammonium chloride (21.0 g, 92.2 mmol) in a 50% aqueous NaOH solution (92.4 g in 185 mL H2O) was added 1,2-dibromobutane (30.0 g, 138.9 mmol) and di-tert-butylmalonate (20.0 g, 92.5 mmol). The reaction mixture was vigorously stirred for 18 hours at room temperature and treated with a mixture of ice and water. The crude product was extracted with dichloromethane (3*) and sequentially washed with water (3*), and brine. The organic extracts were combined, dried (MgSO4), filtered, and concentrated in vacuo. The resulting residue was purified by flash column chromatography (100g SiO2, 3% diethyl ether in hexane) to provide the desired product (18.3 g, 67.8 mmol, 73% yield) which was used directly in the next reaction.

The synthetic route of 541-16-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bristol-Myers Squibb Company; US2009/304626; (2009); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Reference of 676621-95-7,Some common heterocyclic compound, 676621-95-7, name is Ethyl 3-(4-fluorophenyl)-2,2-dimethylpropanoate, molecular formula is C13H17FO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Preparation of3- (4-fluorophenyl)-2, 2- dimethylpropionic acid A mixture of 3- (4-fluorophenyl)-2, 2-dimethylpropionic acid ethyl ester (10.0 g, 44.6 mmol, see Part 1 of Example 25a) and a solution of sodium hydroxide (25 g) in water (110 mL) was heated at refluxfor 18 h and cooled to room temperature. The solution was stirred on an ice bath and acidified with, concentrated aqueous hydrochloric acid. The resulting precipitate was collected by filtration, washed with water and dried under vacuum. The residue was stirred with dichloromethane and filtered, and the filtrate was concentrated to provide an off-white solid (7.60 g, 87%). OH NMR (300 mHz, CDC13) 6 7.14 (m, 2H), 6.98 (t, J = 9 Hz, 2H), 2.88 (s, 2H), 1.22 (s, 6H); mass spec (ES-) m/z 195.2 (100%,M-H+).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Ethyl 3-(4-fluorophenyl)-2,2-dimethylpropanoate, its application will become more common.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; WO2005/48932; (2005); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 924-99-2, name is Ethyl 3-(dimethylamino)acrylate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 924-99-2, Computed Properties of C7H13NO2

A mixture of 2,4-dichloro-5-fluoro-3-nitrobenzoic acid (10.2 g, 40 mmol) and thionyl chloride (19.0 g, 160 mmol) in dry benzene (120 ml) was refluxed for 3 – 4 h under anhydrous conditions. The solvent and excess thionyl chloride were then distilled off under reduced pressure, and dry benzene (20 ml) was then introduced into the reaction vessel and re-distilled so as to remove traces of thionyl chloride. The resulting 2,4-dichloro-5-fluoro-3-nitrobenzoyl chloride, formed as thick oil, was used as such for the next step without further purification. To a stirred and cooled (5-10 C) solution of ethyl 3-(N,N-dimethylamino)acrylate (6.3 g, 44 mmol) and triethylamine (8.1 g, 80 mmol) in dry benzene (50 ml) was added dropwise a solution of the crude acid chloride (prepared above) in dry benzene (25 ml). The resulting mixture was refluxed for 2 h, then cooled to rt and washed with water (2 x 30 ml). The organic layer was separated, dried (anhydrous MgSO4) and the solvent benzene was then evaporated to dryness under reduced pressure. The residual product was soaked in methanol (10 ml) whereby the title compound 5 was produced as yellowish powder which was collected by suction filtration and dried. Yield = 13.8 g (91%). IR (KBr): v 3074, 3037, 2988, 2928, 2873, 1689, 1619, 1554, 1454, 1397, 1375, 1344, 1321, 1278, 1206, 1177, 1129, 1030 cm-1; 1H NMR (300 MHz, CDCl3): delta 0.95 (t, J = 7.1 Hz, 3H, CH3), 2.97 (s, 3H) and 3.37 (s, 3H) [N (CH3)2], 3.94 (q, J = 7.1 Hz, 2H, CH2Me), 7.27 (d, 3JH-F = 8.2 Hz, 1H, H-6), 7.91 (br s, 1 H, N-C(3″)-H); 13C NMR (75 MHz, CDCl3): delta 13.8 (CH3CH2), 43.3, 48.4 [N (CH3)2], 60.2 (CH2Me), 100.9 (C-2″), 114.5 (d, 2JC-F = 23.3 Hz, C-4), 116.9 (d, 2JC-F = 23.1 Hz, C-6), 118.2 (d, 3JC-F = 4.5 Hz, C-1), 144.2 (d, 3JC-F = 6 Hz, C-3), 148.8 (br d, 4JC-F = 1.3 Hz, C-2), 156.6 (d, 1JC-F = 254 Hz, C-5), 160.5 (N-C-3″), 166.5 (CO2Et), 185.1 (C = O).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Ethyl 3-(dimethylamino)acrylate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Universitaet Duisburg-Essen; EP2128160; (2009); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Some common heterocyclic compound, 2557-13-3, name is Methyl 3-(trifluoromethyl)benzoate, molecular formula is C9H7F3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of Methyl 3-(trifluoromethyl)benzoate

EXAMPLES 24 AND 25(3-(3-(Trifluoromethyl)phenyl)-4,5-dihydronaphtho[l,2-c]isoxazol-7-yl)methanol (24) andl-((3-(3-(Trifluoromethyl)phenyl)-4,5-dihydronaphtho[l,2-c]isoxazol-7- -3-carboxylic acid (25)[00331] To 6-vinyl-3,4-dihydronaphthalen-l(2H)-one oxime (Intermediate 1, 0.151 g, 0.808 mmol) was added 5 mL of toluene and the contents were concentrated under reduced pressure. The resulting solid was kept under high vacuum for 10 min. The white solid was cooled to 0 C and lithium diisopropylamide (2.0 M, 0.8 mL, 1.61 mmol) was added drop wise over a period of 3 min. The reaction mixture was stirred at 0 C for 20 min., then methyl 3-(trifluoromethyl)benzoate (0.087 mL, 0.539 mmol) was added dropwise over a period of 1 min. at 0 C. After 10 min. at 0C, concentrated sulfuric acid (0.2 mL) was added dropwise at 0 C and the reaction was stirred for 20 minutes. Water (2 mL) was added and the homogenous solution was heated at 60 C for ~2 hr. The reaction mixture was stirred overnight at room temperature. The contents were concentrated under reduced pressure. Next, 5 mL of dioxane was added and the contents were heated at 100 C for 1.5 hr. The reaction mixture was concentrated under reduced pressure and partitioned between ethyl acetate (20 mL) and sat. aq. sodium bicarbonate (10 mL). The ethyl acetate layer was dried over sodium sulfate, concentrated under reduced pressure, and purified by silica gel column chromatography (hexane/ethyl acetate). Fractions corresponding to the product were collected and concentrated to yield 3-(3-(trifluoromethyl)phenyl)-7-vinyl-4,5-dihydronaphtho[l,2-c]isoxazole (0.15 g, 0.439 mmol, 82 % yield) as a pale yellow solid. LC/MS M+1 = 342.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2557-13-3, its application will become more common.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; DHAR, T.G. Murali; XIAO, Hai-Yun; WATTERSON, Scott Hunter; KO, Soo S.; DYCKMAN, Alaric J.; LANGEVINE, Charles M.; DAS, Jagabandhu; CHERNEY, Robert J.; WO2011/59784; (2011); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Some common heterocyclic compound, 136333-97-6, name is Methyl 4-(2-bromoethyl)benzoate, molecular formula is C10H11BrO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of Methyl 4-(2-bromoethyl)benzoate

8e) 4-(2-Bromoethyl)benzyl alcohol To a suspension of LiAIH4 (4.5 mmol; 0.172 g) in anhydrous THF(5.0 ml) cooled to 00C was added dropwise a solution of methyl 4-(2- bromoethyl)benzenecarboxylate (1.0 g; 4.1 mmol) in anhydrous THF(10.0 ml). The reaction mixture was stirred for 5 minutes at room temperature and, after adding ice, was filtered through a Bchner filter.The solvent was removed under reduced pressure and the residue was extracted with ethyl acetate (3 * 100 ml). The combined organic phases were washed with saturated NaCI solution, dried over sodium sulfate and evaporated under reduced pressure. 800 mg (82.6%) of pure product were thus obtained as an oil .1H NMR (CDCI3, delta ppm): 3.22 (t, 2H); 3.62 (t, 2H); 4.72 (s, 2H); 7.25- 7.39 (m, 4H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 136333-97-6, its application will become more common.

Reference:
Patent; AZIENDE CHIMICHE RIUNITE ANGELINI FRANCESCO A.C.R.A.F. S.p.A.; ALISI, Maria Alessandra; CAZZOLLA, Nicola; COSTI, Roberta; DI SANTO, Roberto; FURLOTTI, Guido; GUGLIELMOTTI, Angelo; POLENZANI, Lorenzo; WO2010/12611; (2010); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 13831-03-3, name is tert-Butyl propiolate, A new synthetic method of this compound is introduced below., Safety of tert-Butyl propiolate

To the mixture of methyl 3-iodobenzoate (157 mg, 0.60 mmol), potassium carbonate (166mg, 1.20 mmol), cupper(I) iodide (14 mg, 0.07 mmol) and PdC12(Ph3P)2 (21 mg, 0.03 mmol) in tetrahydroffiran (2 mE) was added tert-butyl propiolate (330 pL, 2.40 mmol) at room temperature. Afier stirred for 20 h at 60 C., the mixture was evaporated to dryness. Theresidue was chromatographed on a silica gel (EtOAc:hex- anes=0: 1 -1 :10) to give the title compound 9-1(155 mg, 99%yield) as a light brown oil.?H NMR (300 MHz, CDC13) oe 8.25 (t, J=1.4, 1H), 8.16- 8.05 (m, 1H), 7.80-7.68 (m, 1H), 7.46 (t, J=7.8, 1H), 3.93 (s,3H), 1.55 (s, 9H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; The Broad Institute, Inc.; Massachusetts General Hospital; Hung, Deborah; Stanley, Sarah; Kawate, Tomohiko; Iwase, Noriakie; Shimizu, Motohisa; (32 pag.)US9416121; (2016); B2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics