Nitrogen content reduction on scenedesmus obliquus biomass used to produce biocrude by hydrothermal liquefaction was written by Miranda, Alejandra M.;Ocampo, David;Vargas, Gabriel J.;Rios, Luis A.;Saez, Alex A.. And the article was included in Fuel in 2021.Quality Control of Methyl nonadecanoate The following contents are mentioned in the article:
The use of Microalgae biomass for biofuel production by hydrothermal liquefaction (HTL) has been proposed as an alternative to traditional fossil fuels. When comparing fossil fuels, Microalgae biocrude has a high nitrogen content, which is one of the challenges that affect this technol. This factor causes operational issues because it lowers the carbon fraction in the chem. composition, which reduces the calorific value and, as a result, raises NOx emissions during combustion. In this work, conditions were established for obtaining Microalgae biomass to allow the production of biocrude with low nitrogen content by HTL. The effect of the variation in nitrogen levels on the culture medium, on cell growth and nitrogen content, was evaluated in the final biomass for the Scenedesmus obliquus strain; at a laboratory scale, the best results (around 0.25 g/L NaNO3) were used at a bench scale with 20 L tubular photobioreactors (PBRs). The remaining biomass was processed through HTL then the resulting biocrude was characterized. The results show that as the nitrogen source in the culture medium increases, the percentage of nitrogen in the remaining biomass and the biocrude produced also increases. It was possible to establish a concentration of nitrogen source in the culture medium that promotes the accumulation of lipids, decreases the protein content in the final biomass and consequently, in the biocrude, without affecting production and yield, a critical factor to take into consideration when assessing the viability of the proposed process. This study involved multiple reactions and reactants, such as Methyl nonadecanoate (cas: 1731-94-8Quality Control of Methyl nonadecanoate).
Methyl nonadecanoate (cas: 1731-94-8) belongs to esters. Esters are widespread in nature and are widely used in industry. In nature, fats are in general triesters derived from glycerol and fatty acids. Esters are responsible for the aroma of many fruits. Cyclic esters are called lactones, regardless of whether they are derived from an organic or inorganic acid. One example of an organic lactone is γ-valerolactone.Quality Control of Methyl nonadecanoate
Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics