Zhang, Yu et al. published their research in Polymers for Advanced Technologies in 2021 | CAS: 102-09-0

Diphenyl carbonate (cas: 102-09-0) belongs to esters. Esters are also usually derived from carboxylic acids. It may also be obtained by reaction of acid anhydride or acid halides with alcohols or by the reaction of salts of carboxylic acids with alkyl halides. Esters contain a carbonyl center, which gives rise to 120° C–C–O and O–C–O angles. Unlike amides, esters are structurally flexible functional groups because rotation about the C–O–C bonds has a low barrier. Their flexibility and low polarity is manifested in their physical properties; they tend to be less rigid (lower melting point) and more volatile (lower boiling point) than the corresponding amides. Related Products of 102-09-0

Synthesis of novel polycarbonate-based thermoplastic polyurethane elastomers compatibilizers with octadecyl side chains and their application in PC/PP blends was written by Zhang, Yu;He, Jingwei;Liu, Fang. And the article was included in Polymers for Advanced Technologies in 2021.Related Products of 102-09-0 The following contents are mentioned in the article:

With the aim to improve the compatibility of polycarbonate (PC)/polypropylene (PP) blends, a novel aromatic polycarbonate diol (PCDL) was synthesized by the transesterification reaction, then a series of polycarbonate-based thermoplastic polyurethane elastomers compatibilizers (TPU-Gx) with octadecyl side chains were successfully prepared by introducing different content of PCDL and glyceryl monostearate (2,3-Dihydroxypropyl octadecenoate; GMS). The structures of synthesized products were confirmed by Fourier transform IR spectroscopy and NMR hydrogen spectroscopy. Thermogravimetry results showed that all TPU-Gx had good thermal stability. The effects of TPU-Gx on the compatibilization of PC/PP blends were investigated in the aspect of morphol., mech., thermal, and rheol. properties. The results showed that all TPU-Gx could enhance the interfacial adhesion between PC/PP and improve the mech. properties of PC/PP blends. Among them, the addition of TPU-G1.5 containing 6.0 wt% PCDL and 1.5 wt% GMS made PC/PP/TPU-G1.5 blends show the highest impact strength, which increased by 54.1% when compared with that of pure PC/PP blends. This study involved multiple reactions and reactants, such as Diphenyl carbonate (cas: 102-09-0Related Products of 102-09-0).

Diphenyl carbonate (cas: 102-09-0) belongs to esters. Esters are also usually derived from carboxylic acids. It may also be obtained by reaction of acid anhydride or acid halides with alcohols or by the reaction of salts of carboxylic acids with alkyl halides. Esters contain a carbonyl center, which gives rise to 120° C–C–O and O–C–O angles. Unlike amides, esters are structurally flexible functional groups because rotation about the C–O–C bonds has a low barrier. Their flexibility and low polarity is manifested in their physical properties; they tend to be less rigid (lower melting point) and more volatile (lower boiling point) than the corresponding amides. Related Products of 102-09-0

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics