Month: June 2021

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 217314-47-1, name is Methyl 3-amino-5-methoxybenzoate, A new synthetic method of this compound is introduced below., Recommanded Product: 217314-47-1

To the solution of 1.57 g (8.7 mmol, 1 eq) 3-amino-5-methoxy-benzoic acid methyl ester (CAS 217314-47-1, can be prepared according to literature procedures) and 0.11 g (0.87 mmol, 0.1 eq) 4-dimethylaminopyridine in 18 ml THF is added the solution of 1.89 g (8.7 mmol, 1 eq) BOC-anhydride in 7 ml THF. The reaction mixture is stirred at rt over night. After dilution with EtOAc the mixture is washed with aqueous sodium bicarbonate and brine, dried over sodium sulfate, and the solvents are evaporated at reduced pressure. The residue is purified by chromatography on silica (flashmaster, hexane to hexane/EtOAc 7/3) to give 0.83 g (2.9 mmol, 34%) product as white solid.MS (LC/MS): 182=[M+H]+ 1H-NMR (400 MHz, CDCl3): 7.54-7.51 (m, 1H), 7.39 (br s, 1H), 7.29-7.28 (m, 1H), 6.59 (br s, 1H), 3.93 (s, 3H), 3.87 (s, 3H), 1.56 (s, 9H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Betschart, Claudia; Lerchner, Andreas; Machauer, Rainer; Rueger, Heinrich; Tintelnot-Blomley, Marina; Veenstra, Siem Jacob; US2008/132477; (2008); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

These common heterocyclic compound, 108928-00-3, name is Ethyl 2,4-difluorobenzoate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. SDS of cas: 108928-00-3

2,4-Difluorobenzoic acid ethyl ester (5.33g) was cooled to 0C and treated with concentrated sulfuric acid (3. 5mL) and then fuming nitric acid (3. 5mL). The mixture was stirred for 2 hours at 0C and then partitioned between dichloromethane (2x50mL) and water (25mL). The organic phase was back extracted with water (25mL) and then dried over magnesium sulfate and concentrated in vacuo. This provided the desired compound as a white solid (5. 00g) which was used without further purification.

The synthetic route of Ethyl 2,4-difluorobenzoate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SMITHKLINE BEECHAM P.L.C.; WO2003/87098; (2003); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Electric Literature of 37746-78-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 37746-78-4 name is (E)-Ethyl 4-bromobut-2-enoate, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: To a vigorously stirring solution of alpha-imino ester 1 (0.5 mmol,1 equiv) and E-ethyl-4-bromocrotonate or methyl-4-bromocrotonate (2, 1.5 mmol, 3 equiv) in EtOH (2 mL) was added indium powder (1 mmol, 2 equiv). The mixture was allowed to stir vigorously for 6 h at 30 C. After this period, the reaction mixturewas quenched with 2 mL of water and transferred to a separating funnel and extracted using ethyl acetate (315 mL). The combined organic layers were dried over anhydrous Na2SO4. Then the solvent was evaporated under vacuum. Purification of the resulting crude reaction mixture by column chromatography on silica gel (EtOAc/Hexane as eluent) gave the product 3 (see Tables 1 and 2 and Scheme 2 for individual entries).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, (E)-Ethyl 4-bromobut-2-enoate, and friends who are interested can also refer to it.

Reference:
Article; Aslam, Nayyar Ahmad; Babu, Srinivasarao Arulananda; Sudha, Arya Jayadev; Yasuda, Makoto; Baba, Akio; Tetrahedron; vol. 69; 32; (2013); p. 6598 – 6611;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 685-88-1, name is Diethyl fluoromalonate, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C7H11FO4

To a solution of diethyl 2- fluoromalonate (5.00 g, 28.1 mmol) in EtOH (100 mL) was added LiOH H20 (2.70 g, 64.3 mmol) at 25 C. The mixture was heated to 50 C for 16 hours. The mixture was filtered to collect solid. The filtrate was concentrated to dryness to get oil. The oil and the solid were dissolved in H20 (30 mL) and MTBE (100 mL), the mixture was acidified by adding cone. HC1 to pH 1, the aqueous layer was extracted with MTBE (30 mL x2), the combined organic layers were dried over Na2S04, filtered and concentrated to give 2-fluoromalonic acid (3.00 g, yield 88%) as a solid.

According to the analysis of related databases, 685-88-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; N30 PHARMACEUTICALS, LLC; SUN, Xicheng; QIU, Jian; STOUT, Adam; WO2012/83165; (2012); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 924-99-2, name is Ethyl 3-(dimethylamino)acrylate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 924-99-2, category: esters-buliding-blocks

A mixture of 2,4-dichloro-5-fluoro-3-nitrobenzoic acid (10.2 g, 40 mmol) and thionyl chloride (19.0 g, 160 mmol) in dry benzene (120 ml) was refluxed for 3 – 4 h under anhydrous conditions. The solvent and excess thionyl chloride were then distilled off under reduced pressure, and dry benzene (20 ml) was then introduced into the reaction vessel and re-distilled so as to remove traces of thionyl chloride. The resulting 2,4-dichloro-5-fluoro-3-nitrobenzoyl chloride, formed as thick oil, was used as such for the next step without further purification. To a stirred and cooled (5-10 C) solution of ethyl 3-(N,N-dimethylamino)acrylate (6.3 g, 44 mmol) and triethylamine (8.1 g, 80 mmol) in dry benzene (50 ml) was added dropwise a solution of the crude acid chloride (prepared above) in dry benzene (25 ml). The resulting mixture was refluxed for 2 h, then cooled to rt and washed with water (2 x 30 ml). The organic layer was separated, dried (anhydrous MgSO4) and the solvent benzene was then evaporated to dryness under reduced pressure. The residual product was soaked in methanol (10 ml) whereby the title compound 5 was produced as yellowish powder which was collected by suction filtration and dried. Yield = 13.8 g (91%). IR (KBr): v 3074, 3037, 2988, 2928, 2873, 1689, 1619, 1554, 1454, 1397, 1375, 1344, 1321, 1278, 1206, 1177, 1129, 1030 cm-1; 1H NMR (300 MHz, CDCl3): delta 0.95 (t, J = 7.1 Hz, 3H, CH3), 2.97 (s, 3H) and 3.37 (s, 3H) [N (CH3)2], 3.94 (q, J = 7.1 Hz, 2H, CH2Me), 7.27 (d, 3JH-F = 8.2 Hz, 1H, H-6), 7.91 (br s, 1 H, N-C(3″)-H); 13C NMR (75 MHz, CDCl3): delta 13.8 (CH3CH2), 43.3, 48.4 [N (CH3)2], 60.2 (CH2Me), 100.9 (C-2″), 114.5 (d, 2JC-F = 23.3 Hz, C-4), 116.9 (d, 2JC-F = 23.1 Hz, C-6), 118.2 (d, 3JC-F = 4.5 Hz, C-1), 144.2 (d, 3JC-F = 6 Hz, C-3), 148.8 (br d, 4JC-F = 1.3 Hz, C-2), 156.6 (d, 1JC-F = 254 Hz, C-5), 160.5 (N-C-3″), 166.5 (CO2Et), 185.1 (C = O).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Ethyl 3-(dimethylamino)acrylate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Universitaet Duisburg-Essen; EP2128160; (2009); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 154825-97-5, name is Methyl 2-(4-bromophenyl)-2,2-dimethylacetate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 154825-97-5, Application In Synthesis of Methyl 2-(4-bromophenyl)-2,2-dimethylacetate

To a suspension of lithium aluminum hydride (2.95 g, 78 mmol, 2 equiv.) in THF (70 mL) at 0C was added a solution of methyl 2-(4-bromophenyl)-2-methylpropanoate (10 g, 39 mmol, 1 equiv.) in THF (60 mL) dropwise. After stirring at 0C for 1 h, the reaction was quenched sequentially with 3 mL of water, 9 mL of a 5% sodium hydroxide solution and 3 mL of water. It was filtered on a Celite pad using ether as an eluent. The solvent was evaporated and the residue was purified by bulb-to-bulb distillation (2-4 mbar, l30C) to afford 2-(4-bromophenyl)-2-methylpropan-l-ol (8.27 g, 93% yield).1H NMR: 1.30 (s, 6H), 3.57 (s, 2H), 7.25 (d, J = 8.6 Hz, 2H), 7.45 (d, J = 8.6 Hz, 2H).13C NMR: 145.6 (s), 131.4 (d, 2C), 128.2 (d, 2C), 120.1 (s), 72.8 (t), 39.9 (s), 25.2 (q,2C).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Methyl 2-(4-bromophenyl)-2,2-dimethylacetate, and friends who are interested can also refer to it.

Reference:
Patent; FIRMENICH SA; COULOMB, Julien; ODDON, Gilles; (33 pag.)WO2019/141761; (2019); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Application of 174579-31-8, These common heterocyclic compound, 174579-31-8, name is tert-Butyl 2-(4-aminophenyl)acetate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Synthesis of compound 2.6. A solution of compound 2.5 (1.0 g, 3.19 mmol, 1.0 eq), tert-butyl 2-(4-aminophenyl)acetate (0.661g, 3.19 mmol, 1.00 eq) and K2C03 (1.32 g, 9.57 mmol, 3.0 eq) in DMF (10.0 mL) was heated at 90 C for 12 hours. Upon completion, the mixture was cooled to room temperature and poured into water. The product was extracted with ethyl acetate (50mL X 3). And the combined organic layers were washed with brine, dried over sodium sulfate and concentrated under reduced pressure. The crude material was purified using flash column chromatography to afford the compound 2.6 (1.10g, 71.4%) MS (ES): m/z 484.2 [M+H]+.

The synthetic route of 174579-31-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NIMBUS LAKSHMI, INC.; MASSE, Craig E.; GREENWOOD, Jeremy Robert; ROMERO, Donna L.; HARRIMAN, Geraldine C.; WESTER, Ronald T.; SHELLEY, Mee; KENNEDY-SMITH, Joshua Jahmil; DAHLGREN, Markus; WO2015/131080; (2015); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 541-16-2 as follows. Formula: C11H20O4

Compound 185a (3.15 g, 8.39 mmol) was dissolved in 50 mL of tetrahydrofuran,3.81 mL of tert-butoxycarboxylic anhydride (i.e., di-tert-butyl dicarbonate Boc2O, 16.78 mmol) and 100 mg of p-dimethylaminopyridine,Room temperature reaction 4h.The residue was purified by column chromatography, eluting with petroleum ether: ethyl acetate = 20: 1 (v / v) to give 3.18 g of compound 185b in 91% yield.

According to the analysis of related databases, 541-16-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Ocean University of China; Key Laboratory of Chemistry for Natural Products of Guizhou Province Chinese Academy of Sciences; Zhu, Weiming; Ma, Hongguang; Wang, Liping; Xu, Zhihong; Zhang, Yapeng; Wang, Yi; Liu, Peipei; (142 pag.)CN106083830; (2016); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 42726-73-8, name is tert-Butyl methyl malonate, A new synthetic method of this compound is introduced below., Product Details of 42726-73-8

Examples 1-9 demonstrate the ability to achieve consistent enantiomeric excess in the malonate/nitrostyrene reaction and that the absolute configuration of the product depends only on allosteric consequences of the oxidation state (and thus the propeller helicity of the ligand) and not on counter ion, solvent, concentration, loading, or base. The ability of Delta/Lambda-1 to catalyze the Michael addition of other nitrostyrenes and dimalonate esters was evaluated. All reactions were carried out using the indicated dimalonate ester (0.67 mmol, 2 equiv), the indicated nitrostyrene (0.34 mmol, 1 equiv), and NEt3 (10 mol percent) in MeCN (1 mL) with 5 mol percent catalyst Delta-1 or Lambda-1) at room temperature for 24 hours. The results are shown in Tables 5 and 6 below.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; NEW YORK UNIVERSITY; Canary, James; Mortezaei, Shahab; US2015/112066; (2015); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

These common heterocyclic compound, 32122-09-1, name is Ethyl 2-(benzyloxy)acetate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of Ethyl 2-(benzyloxy)acetate

Preparation of intermediate G-1. TiCI4, Bu3N,1 -methylimidazoleA-1 G-1To a stirred solution of A-1 (60 g, 309 mmol, 1 eq) and 1 -methylimidazole (30.4 g, 370 mmol, 1 .2 eq) in CH2CI2 (1 L) was added acetyl chloride (24.3 g, 309 mmol, 1 eq) at -45 C under N2. After stirring for 20 min, TiCI4 (210 g, 1 .08 mol, 3.5 eq) and tributylamine (230 g, 1 .24 mol, 4 eq) were added to the mixture at -45C under N2, and continues to stir for 50 minutes at -45C under N2. After completion, water and ethyl acetate were added. The organic layer was separated and the aqueous layer was extracted with ethyl acetate twice. The organic layer was washed with brine and dried over sodium sulfate. The solids were removed by filtration and the solvents of the filtrate were removed under reduced pressure. The crude was purified via silica column chromatography using a heptane to ethyl acetate gradient to afford a pale yellow oil, G-1. 1H NMR (400 MHz, CHLOROFORM-cf) delta ppm 1 .30 (t, J=7.2 Hz, 3 H), 2.28 (s, 3 H), 4.27 (q, J=7.2 Hz, 2 H), 4.41 (s, 1 H), 4.58 (d, J=1 1 .8 Hz, 1 H), 4.75 (d, J=1 1 .8 Hz, 1 H), 7.32 – 7.43 (m, 5 H)

The synthetic route of Ethyl 2-(benzyloxy)acetate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; JANSSEN R&D IRELAND; MC GOWAN, David; RABOISSON, Pierre Jean-Marie Bernard; EMBRECHTS, Werner; JONCKERS, Tim, Hugo, Maria; LAST, Stefaan, Julien; PIETERS, Serge, Maria, Aloysius; VLACH, Jaromir; WO2012/136834; (2012); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics