Month: December 2020

Some common heterocyclic compound, 609-12-1, name is Ethyl 2-bromo-3-methylbutanoate, molecular formula is C7H13BrO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 609-12-1

General procedure: Benzenesulfonamide (1.2mmol), ethyl alpha-bromophenylacetate or ethyl pheny-lacetate (2.4mmol), and toluene (4mL)werecombinedinasealedtubeequippedwith astirbar.Themixturewasstirredat50Cfor10min,TiCl4 (1.8 mmol) was added, andthereactionmixturewasheatedto115C.Afteravariableperiodoftimethe mixturewasdilutedwithH2O (10mL)toremovetheexcessofTiCl4, filtered,andextracted withAcOEt(3¡Á15mL). The combined organic layers were dried over anhydrous Na2SO4 and thesolventwasevaporatedinvacuo.Crudecompoundswere purified by flash column chromatography (silicagel;cyclohexane=AcOEt 8:2). 2-Bromo-N-[(4-methoxyphenyl)sulfonyl]-3-methylbutanamide (4c). Sticky oil, 59% yield; IR(KBr) 3564, 3236, 2970, 1906, 1722, 1596, 1499, 1443, 1346, 1265, 1165, 1087, 1023, 865, 834,559 cm-1; 1H NMR (CDCl3) d 0.94 (d, 3H, J 6.3Hz, CH3), 0.95 (d, 3H, J 6.6 Hz, CH3), 2.19(octuplet, 1H, J 6.6 Hz, CH3CHCH3), 3.87 (s, 3H, OCH3), 4.09 (d, 1H, J 6.6 Hz, CHBr), 6.99 (d,2H, J 9.0 Hz, CH Ar), 8.00 (d, 2H, J 9.6 Hz, CH Ar), 9.09 (broad s, 1H, NH); 13C NMR (CDCl3)d 18.9 and 20.2 (CH3), 32.4 (CH3CHCH3), 55.7 (OCH3), 58.0 (CHBr), 114.1 (CH Ar), 129.0 (CSAr), 130.9 (CH Ar), 164.1 (CH3OC Ar), 166.2 (CONH); Anal calcd for C12H16BrNO4S: C 41.15; H4.60; N 4.00; found C 41.22; H 4.59; N 4.02 %.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 609-12-1, its application will become more common.

Reference:
Article; Ammazzalorso, Alessandra; Tricca, Maria Luisa; Bruno, Isabella; De Filippis, Barbara; Di Matteo, Mauro; Fantacuzzi, Marialuigia; Giampietro, Letizia; Maccallini, Cristina; Mollica, Adriano; Amoroso, Rosa; Synthetic Communications; vol. 45; 22; (2015); p. 2546 – 2554;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

The chemical industry reduces the impact on the environment during synthesis 13671-00-6, name is Methyl 2,6-difluorobenzoate, I believe this compound will play a more active role in future production and life. 13671-00-6

1,8-Diazabicyclo[5.4.0]undec-7-ene (0.43 ml, 2.90 mmol, 5.0 eq) wasadded to a solution of methyl 2,6-difluorobenzoate (100 mg, 0.58 mmol, 1.0 eq) in methanol (0.35 mL). The resulting solutionwas stirred at room temperature and hydroxylamine in aqueous solution 50% (0.36ml, 5.81 mmol, 10.0 eq) was added. After 2h the reaction was stopped and themixture is adjusted to pH 6 with acetic acid. The aqueous layer was extractedthree times with ethyl acetate. The combined organic layer was dried with MgSO4,concentrated and purified by preparative HPLC to afford 2,6-difluoro-N-hydroxy-benzamide (54 mg, 0.31 mmol, 54 %) as a white solid: MS ES+ m/z 174.1 (M+H)+; 1HNMR (400 MHz, DMSO-d6) delta 11.18 (s, 1H), 9.41 (s, 1H), 7.54 (m, 1H), 7.22 – 7.14 (m, 2H); 13CNMR (101 MHz, DMSO-d6) delta 159.3 (dd, J = 249.9, J = 8.4 Hz), 156.6, 132.2 (t, J = 10.3 Hz), 113.3 (t, J = 23.3 Hz), 112.1 (dd, J = 19.7, J = 5.4 Hz) ; 19FNMR (377 MHz, DMSO-d6) delta -113.6 (t, J = 7.0 Hz).

The chemical industry reduces the impact on the environment during synthesis 13671-00-6. I believe this compound will play a more active role in future production and life.

Reference:
Article; Beillard, Audrey; Bhurruth-Alcor, Yushma; Bouix-Peter, Claire; Bouquet, Karinne; Chambon, Sandrine; Clary, Laurence; Harris, Craig S.; Millois, Corinne; Mouis, Gregoire; Ouvry, Gilles; Pierre, Romain; Reitz, Arnaud; Tomas, Loic; Tetrahedron Letters; vol. 57; 20; (2016); p. 2165 – 2170;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

6279-86-3, These common heterocyclic compound, 6279-86-3, name is Triethyl methanetricarboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

10 g 3-Amino-5,5-dimethyl-2-cyclohexen-1-one and 25 g 2-Ethoxycarbonyl-malonic acid diethyl ester are combined and heated for 10 minutes at 210 C. (bath temperature). Thereafter the mixture is cooled to room temperature and triturated with diethylether. The crystalline precipitate is collected by filtration and dried in vacuo.Yield: 9.9 g (49% of theory)Mass spectrometry (ESI+): m/z=280 [M+H]+ Rf-value: 0.45 (silica gel, dichloromethane/methanol 9:1)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 6279-86-3.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; US2012/46304; (2012); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 6279-86-3, name is Triethyl methanetricarboxylate, This compound has unique chemical properties. The synthetic route is as follows., 6279-86-3

Synthesis of sodium salt of 2-ethoxycarbonyl-malonic acid diethyl ester; Sodium ethoxide solution was prepared in a flame-dried 100 mL flask under a flow of argon gas using sodium metal (0.21 g, 9.14 mmol) and dry ethanol and was added slowly to a solution of triethyl methanetricarboxylate (2.12 g, 9.14 mmol) in 20 mL of THF while the reaction temperature was maintained around 1 0C using an ice bath. This resulted in the precipitation of product as white solid. The solvent was removed under reduced pressure and the salt was washed with dry petroleum ether and dried under high vacuum to get the product, which was non-hygroscopic in nature. 1H NMR (300 MHz, D2O): 1.22 (t, 9H), 4.08 (q, 6H). Mass: 232 [(MM)-Na+].

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; INDIAN INSTITUTE OF TECHNOLOGY BOMBAY; WO2006/117800; (2006); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

37466-90-3, Name is Ethyl 3,4-diaminobenzoate, 37466-90-3, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows.

General procedure: Ethyl-3-amino-4-(2-substituted amino)benzoate, 3 (1 mmol) and various sodium bisulfite adducts, 4 (1.5 mmol) were dissolved in DMF (5 mL). The reaction mixture was stirred at 90 C under N2 atmosphere for 24-48 h. After completion of reaction (evident by TLC), the reaction mixture was diluted in ethyl acetate (25 mL) and washed with water (10 mL¡Á3). The organic layer was collected, dried over Na2SO4 and evaporated under reduced pressure to afford crude products. Final compounds 5-7 were obtained in 38-90% yields after recrystallization from ethanol or column purification.

Statistics shows that Ethyl 3,4-diaminobenzoate is playing an increasingly important role. we look forward to future research findings about 37466-90-3.

Reference:
Article; Yoon, Yeong Keng; Ali, Mohamed Ashraf; Wei, Ang Chee; Choon, Tan Soo; Ismail, Rusli; European Journal of Medicinal Chemistry; vol. 93; (2015); p. 614 – 624;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

154825-97-5, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 154825-97-5, name is Methyl 2-(4-bromophenyl)-2,2-dimethylacetate, A new synthetic method of this compound is introduced below.

Example 72C; methyl 2-{4-[(7-amino-5-methyl[l,2,4]triazolo[l,5-alpha]pyrimidin-6-yl)ethynyl]phenyl}-2- methylpropanoate A mixture of Example 72B (17 mg, 0.1 mmol), methyl 2-(4-bromophenyl)-2- methylpropanoate (38 mg, 0.15 mmol), bis(triphenylphosphine)palladium(II) dichloride (3.5 mg, 0.005 mmol), CuI (1 mg, 0.005 mmol), and triethylamine (28 muL, 0.2 mmol) in acetonitrile (500 muL) was heated at 95 0C under nitrogen for 1 h. The resulting mixture was partitioned between ethyl acetate and water. The organic phase was washed with brine, dried over MgSO4, filtered, and concentrated in vacuuo. The residue was purified by flash chromatograph on silica gel (eluting with ethyl acetate) to provide the title compound as a white solid (16 mg, 45% yield). 1H NMR (300 MHz, DMSO-J6) delta 8.44 (s, 3 H), 7.64 (d, J = 8.48 Hz, 2 H), 7.36 (d, J= 8.48 Hz, 2 H), 3.61 (s, 3 H), 2.60 (s, 3 H), 1.52 (s, 6 H). MS (ESI) m/z 350 (M+H)+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ABBOTT LABORATORIES; WO2008/134690; (2008); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

A common heterocyclic compound, 6933-47-7, name is Methyl 4-amino-2-methylbenzoate, molecular formula is C9H11NO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 6933-47-7.

General procedure: Step (viii): Methyl 4-(3-chloro-4-ethoxy-5-isopropoxybenzamido)-2-methylbenzoate. A suspension of 217 3-chloro-4-ethoxy 5-isopropoxybenzoic acid (48: R2=iPr, R3=Et) (2.82g, 10.9mmol) and 145 methyl 4-amino-2-methylbenzoate (38: R1=Me) (2.16g, 13.1mmol) in 45 ethyl acetate (33mL) was treated with 46 triethylamine (4.56mL, 32.7mmol) followed by 44 T3P (50wt% in ethyl acetate) (17.34mL, 27.3mmol) and the mixture was heated at 60C for 4h and allowed to cool to room temperature for 16h. The reaction mixture was stirred vigorously with an aqueous solution of 218 sodium hydrogencarbonate (50mL) for 10min and separated. The aqueous layer was extracted with dichloromethane (3¡Á100mL) and the combined organic phases were dried (magnesium sulfate), filtered concentrated in vacuo and the residue purified by silica gel chromatography (40g, 0:50:50 to 20:40:40 ethyl acetate:120 dichloromethane:isohexane) to produce 219 methyl 4-(3-chloro-4-ethoxy-5-isopropoxybenzamido)-2-methylbenzoate as a beige solid (3.24g, 70% yield).

The synthetic route of Methyl 4-amino-2-methylbenzoate has been constantly updated, and we look forward to future research findings.

Reference:
Article; Clarke, Earl; Jarvis, Christopher I.; Goncalves, Maria B.; Kalindjian, S. Barret; Adams, David R.; Brown, Jane T.; Shiers, Jason J.; Taddei, David M.A.; Ravier, Elodie; Barlow, Stephanie; Miller, Iain; Smith, Vanessa; Borthwick, Alan D.; Corcoran, Jonathan P.T.; Bioorganic and Medicinal Chemistry; vol. 26; 4; (2018); p. 798 – 814;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 24398-88-7, name is Ethyl 3-bromobenzoate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 24398-88-7, 24398-88-7

Preparation of ethyl-3-isopropylthiobenzoate [formula 6] A solution of palladium acetate (4.5 mg, 0.02 mmol) and Xantphos (12.7 mg, 0.022 mmol) in DMF (1 mL) was stirred for 5 minutes under a nitrogen atmosphere. To this solution was added ethyl 3-bromobenzoate (1 14.5 mg, 0.5 mmol) dissolved in 0.5 mL of DMF and then the reaction mixture was stirred for 10 minutes at room temperature. In(SPr’)3 (57 mg, 0.168 mmol) in DMF ( 1 mL) and diisopropylethyl amine (65 mg, 0.5 mmol) were added to this reaction mixture. The reaction mixture was stirred for 2 hours at 100 degrees Celsius. The solution was cooled to room temperature and then 1 mL of hydrochloric acid (5 % of aqueous solution) was added to stop the reaction. The crude product was extracted with diethyl ether (15 mL, 3 times) and sequentially washed with 10 mL of water, a saturated NaHCO3 (10 mL) solution and a saturated NaCl (20 mL) solution. The extracted organic compound was dried over anhydrous MgSO4 and then filtered. After evaporation of solvents, the crude product was purified by column chromatography to give ethyl-3-isopropylthio benzoate (102 mg, 91 %) (formula 6).1H-NMR (400 MHz, CDCl3, 25 degrees Celsius) delta 8.06(s, IH), 7.89(d, J=7.8Hz, IH), 7.56(d, J=7.8Hz, IH), 7.36(t, J=7.8Hz, IH), 4.38(q, J=7.1Hz, 2H), 3.44(sep, J=6.7Hz, IH), 1.40(t, J =7. IHz, 3H), 1.31(d, J =6.7Hz, 6H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Ethyl 3-bromobenzoate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; KNU-INDUSTRY COOPERATION FOUNDATION; WO2009/69888; (2009); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

4897-84-1, A common compound: 4897-84-1, name is Methyl 4-bromobutanoate, belongs to esters-buliding-blocks compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below.

To a solution of Lambda/-[4-(7-Hydroxy-6-methoxy-quinolin-4-yloxy)-phenyl]-benzamide (170mg, 0.44mmol) in anhydrous DMF (15ml) was added potassium carbonate (121 mg, O.deltadeltammol, 2eq) and methyl-4-bromobutyrate (83mul, 0.66mmol, 1.5eq). The reaction was stirred at room temperature for 48 hours. The DMF was removed under reduced pressure and ethyl acetate was added to the crude residue, washing with water. The ethyl acetate layer was dried over magnesium sulphate and evaporated under reduced pressure. The crude product was isolated as a yellow oil (220mg, >100percent) and was taken forward without further purification. LCMS (254 nm), m/z 487.2 [M+H]+. 1H NMR (300 MHz, CDCI3), delta: 8.32 (1 H, d, J=5.3Hz), 7.90- 7.84 (1 H, m), 7.75 (2H, dd, J=8.2, 1.4Hz), 7.65-7.58 (2H, m), 7.46-7.32 (3H, m), 7.11 (1 H, s), 7.08-7.02 (2H, m), 6.33 (1 H, d, J=5.3Hz), 4.08 (2H, t, J=6.2Hz), 3.87 (3H, s), 3.55 (3H, s), 2.45 (2H1 1, J=7.3Hz), 2.17-2.06 (2H, m).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 4-bromobutanoate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; CHROMA THERAPEUTICS LTD; WO2006/117570; (2006); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 10601-80-6, name is Ethyl 3,3-diethoxypropionate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. 10601-80-6

General procedure: A mixture of montmorillonite K-10 (75 mg), an appropriate aniline 1 (150 mg, 1.2 mmol), ethyl-3,3-diethoxypropionate (3) (579 mg, 3 mmol) and an aldehyde (166 mg, 1.34 mmol) in pure water (7.5 mL) was stirred at 90 C for the time mentioned in Table 2. After completion of the reaction (indicated by TLC), the mixture was cooled to room temperature and filtered. The filtrate was extracted with EtOAc (3 ¡Á 5 mL). The organic layers were collected, combined, dried over anhydrous Na2SO4, filtered and concentrated under reduced pressure. The residue was purified by column chromatography on silica gel using ethyl acetate-hexane to give the desired product.

The synthetic route of 10601-80-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Reddy, T. Ram; Reddy, G. Rajeshwar; Reddy, L. Srinivasula; Meda, Chandana Lakshmi T.; Parsa, Kishore V.L.; Kumar, K. Shiva; Lingappa; Pal, Manojit; European Journal of Medicinal Chemistry; vol. 62; (2013); p. 395 – 404;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics